Android Car Player Instruction Manual

Android Car Player Instruction

SPECIFIKACIJA

• power Supply Volllgo
• Maksimalna trenutna potrošnja
• Maksimalna izlazna snaga

1. SHEMA OŽIČENJA UNIVERZALNOG STROJA
   
2. SHEMA OŽIČENJA ZA SPECIJALNA VOZILA

MJERE OŽIČENJA

• 10P: Connect the reversing video input. Note: The two short wires above this line are the Bluetooth antenna and the WIFI antenna. Even if the reversing camera is not connected, this cable needs to be connected to the machine, otherwise Bluetooth and WIFI will not be connected, and carplay and Android auto will not be connected.
• 6P: Spojite USB-2.
• 4P. Connect USB-1.
• 8P: Connect the CANBUS box. Note: When the product you purchased has a CANBUS box, you must connect the CANBUS box to the
• 8Pin socket on the body, otherwise some of the original car functions will not be available.
• 12P.360-degree panoramic reversing image (only supported by some models).
• 20P.RCA plug. The AMP CONT linija treba biti sljedeća: Ako vaš automobil podržava zvučnike poput JBL-a ili BOSE-a, možda ćete morati spojiti ovaj kabel na kontrolu uključivanja/isključivanja napajanja vašeg automobila. amplifier, and try connecting it when there is no sound.

NAČIN UGRADNJE KAMERE ZA VOŽNJU UNAZAD

UPUTE ZA OŽIČENJE UNIVERZALNOG KABLA ZA NAPAJANJE

Tips The wiring harness colors of some models may be different. Please refer to the wire labels and the positions on the plugs and sockets.

DEFINICIJA PINOVA ZA NAPAJANJE UNIVERZALNOG STROJA

UČENJE KOMANDA NA VOLANU
Pritisnite i držite gumb na upravljaču originalnog automobila i pronađite ikonu gumba koja odgovara funkciji gumba na upravljaču. Kliknite ikonu za promjenu boje, učenje je uspješno.

iPhone Mirrorlink (podržavaju samo neki modeli)
Kada je uređaj priključen na iPhone, sadržaj zaslona telefona će se projicirati na zaslon automobila.

Android Mirrorlink (podržavaju samo neki modeli)
When using an Android device, after connecting the USB data cable. you will be prompted to install the APP software. After installation, Plug the data cable again, it will enter the screen mirroring mode. And it can be operatedon both the player screen and the phone screen. Only the image transfer is successful at this time. The sound can only be  transmitted after the Bluetooth connection is successful.

Apple Car Play (Only some models support)

1. Wired connection: Just connect the USB data cable, and then it will auto matically enter the CarPlay interface.
2. Wireless connection: first tum on the bluetooth and wifi functions of the mobile phone. and then connect the bluetooth. Then it will automatically enter the CarPlay interface.
   (Note. The signal is transmitted through wifi at this ime, so even if the Bluetooth function is tumed off, it will be transmitted normally. When the wifi function is turned off. CarPlay will be disconnected.)

Android Auto (samo neki modeli podržavaju)
Ova značajka nije podržana u svim zemljama, a "Google Play usluge moraju biti dostupne lokalno.

1. Potrebno je preuzeti i instalirati "Android Auto" software in “Google Play”
2. Mora se koristiti mobilni telefon s Androidom 6.0 ili novijim. Morate koristiti valjanu vezu podatkovnog kabela.
3. Žičana veza: samo spojite USB podatkovni kabel, a zatim će automatski ući u Android Auto sučelje.
4. Wireless connection: First turn on the Bluetooth and wifi functions of the mobile phone. and then connect the Bluetooth. Then it will automatically enter the Android Auto interface. (Note: The signal is transmitted through wifi at this time, so even if the Bluetooth function is turned off, it will be transmitted normally. When the wifi function is turned off, Android Auto will be disconnected.)

ČESTI PROBLEMI I JEDNOSTAVNO RJEŠAVANJE PROBLEMA

Ne može se normalno pokrenuti

1. “Yellow” “Red” “Black’ this 3 lines only connected 2 line of them, so it will not start, it should be that the yellow line is connected to the positive pole, red line to the key control line, black to the negative pole, less connection or wrong connection does not boot.
2. Izvorna linija automobila i ožičenje jedinice ne mogu se spojiti na boju, boja izvorne linije automobila nije standardna, ako se tako spojite, ne samo da se može uključiti, već može i izgorjeti.
3. Originalni automobilski utikač ne može se priključiti izravno u novu jedinicu, čak i ako se samo uključi, ne može se koristiti. inače se neće uključiti ili spaliti.
4. 3 žice su dobro spojene, ali se ne pokreće. Provjerite je li osigurač na žutoj liniji pokvaren. Ako nema problema s osiguračem, uvrnite žutu i crvenu žicu zajedno. Uključite ključ i pritisnite tipku za napajanje jedinice da vidite može li se uključiti.
5. Every time you change the fuse, it burns. Please don’t change it again The reason is that when you first connect the positive and negative poles, the protection circuit of the unit is short-circuited. The unit can be repairedunder the guidance of our master. No basis can only be returned to the after-sales or new unit. If these are no problem, or also don’t boot, please make the final step to confirm, find a 12V battery or 12V power supply yellow and “red twist together with the positive, black to the negative pole. press the button check if it can boot or no, if you can boot, it showed that the original car line is not right connect, or there is a problem with the car line.  If it can’t be boot, the unit is broken. Does not boot unit, check the line carefully, do not blindly suspect the unit problem.

Automatsko gašenje

1. Greška u povezivanju kabela: Ako je plavi kabel (automatsko napajanje antene) spojen na kabel napajanja jedinice, doći će do automatskog isključivanja. Molimo slijedite ispravnu metodu ožičenja kako biste riješili problem.
2. Voltage je nestabilan: pronađite 12V-5A koji je izvor napajanja i ponovno ga testirajte da vidite hoće li se automatski isključiti. Ako se nakon testa ne isključi automatski, zamijenite napajanje. Ako se automatski isključi, to je problem s jedinicom.

Čuje se buka

1. Izvorna snaga zvučnika je premala. Kad se glasnoća jedinice pojača. bit će buke.
   Otopina: Kada mijenjate zvučnik ili slušate pjesmu, glasnoća ne smije biti prevelika.

Kabel zvučnika je uzemljen.
Otopina: Uzmi željezni kabel zvučnika. Izravno spojen na kabel zvučnika jedinice.

Daljinski upravljač se ne može koristiti

1. Test method Turn on the camera of the mobile phone and align the light of the remote control then press the button of the remote control to see if the phone will light up. If it is not lit there will be no power. Replace the battery: If it is it there is electricity, which proves that there is no problem with the remote control.

Postavke se ne mogu spremiti (nema memorije)

1. Žuta linija i crvena linija spojene su zajedno (odvojeno žuto na pozitivno, crveno na ključnu kontrolu).
2. Žuta i crvena su obrnute (samo promijenite položaj).

Bluetooth ne radi
Uključite stroj, potražite Bluetooth naziv stroja pomoću Bluetootha mobilnog telefona, a zatim kliknite Poveži, nakon povezivanja možete odgovarati na pozive ili reproducirati pjesme putem Bluetootha.

Proizvod ispušta dim
Zamijenite osigurač FUSE, ako se problem ne može riješiti, interni krug je pregorio. Potrebna je usluga nakon prodaje.

Zvuk se ne može podešavati

1. Molimo resetirajte jedinicu ili isključite kabel za napajanje i uključite ga.
2. The Volume knob is broken, and it can be replaced.

Kamera za vožnju unatrag ne prikazuje

1. Pogrešno ožičenje ili ožičenje koje nedostaje.

Način spajanja kamere:

1. Pronađite dodatnu opremu: 1 kamera + 1 kabel za napajanje + 1 video kabel.
2. Find the port of the wiring. First find the reverse control line on the power line of the unit. The control line is a pink line. Connect this line to the positive pole of 12V and the screen will turn blue. And then find the back of the unit the CAM video input interface, find the positive and negative of the backup light.
3. Postoje dvije utičnice na kameri, crvena utičnica je spojena na kabel za napajanje, žuta je umetnuta u video kabel, crvena žica kabela za napajanje i žica video kabela spojene su zajedno na pozitivni pol obrnutog lamp, and the black wire of the power cable is not used. connected, the other end of the video cable is connected to the CAM video input interface on the back of the unit. The red line coming out of the video line is connected to the reversing control line of the power line.
4. Kamera je pokvarena. Ako je lamp koji je ispravno spojen na kameru ne svijetli. bit će pokvaren i zamijenjen novim.

USB uređaji se ne mogu reproducirati
Formatirajte USB flash disk i file sustav je odabran kao: FAT32, ponovno preuzmite jednu ili dvije pjesme i pokušajte ponovno. Ako i dalje ne radi, zamijenite USB flash pogon.

FM ne prima radio stanicu

1. The antenna plug is not fully inserted, the antenna is disconnect or the line is disconnected.
2. Search station, press AS will automatically search or press the before or after button. Can’t solve the above 2 points. Please unplug the antenna plug and find a screwdriver or a metal strip to insert into the antenna.

Nema zvuka odmah nakon instalacije
Dear customers, the unit has been tested before shipment. If there is no sound, it is usually a wiring error or the original car speaker wire is short- circuited with iron. According to the steps to check it:

1. Provjerite je li kabel zvučnika u kratkom spoju i spojen. Molimo ponovno spojite ako imate bilo kakav kratki spoj.
2. Check how many speaker cables according to the original speaker cable if there are only 2 speaker cables, to prove that the original car line does not match our unit, you need to re-route the original car line. One speaker must lead to 2 speaker wires. 2 speakers must be have 4 speaker cables to available.

Nakon nekog vremena nema zvuka
Disconnect all the speaker cable from the unit (do not remove them), and then find an external speaker to receive the gray and purple of the tail line of the unit.Check any group, and then try to see if there is any sound If there is a sound, it is proven that the car’s speaker line is short-circuited with iron or the speaker is damaged. If there is no sound, the unit is broken.

Savjeti: If the device is updated, the functions are subject to change without prior notice