Intermatic Digital 7-Day Programmable Wall Switch Timer SS7C User Manual

Uvod

The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.

Sigurnosne informacije

UPOZORENJE: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.

• Provjerite je li napajanje isključeno prije instalacije.
• Slijedite sve lokalne i nacionalne električne propise.
• Ovaj uređaj je samo za unutarnju upotrebu.

Sadržaj paketa

Prije početka instalacije provjerite jesu li sve komponente prisutne:

• Intermatic SS7C Digital Wall Switch Timer Unit
• Montažni vijci
• Žičane matice
• Upute za uporabu (ovaj dokument)

Postavljanje i instalacija

Potrebni alati: Screwdriver, Wire Strippers, Electrical Tape.

1. Isključite napajanje: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltage tester.
2. Uklonite postojeći prekidač: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
3. Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
   

   Slika: prednja strana view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.

   • Linijska žica: Connect to the timer's LINE terminal.
   • Žica za opterećenje: Connect to the timer's LOAD terminal.
   • Podna žica: Connect to the timer's GROUND terminal.
   • Neutral Wire (if applicable): Some installations may require a neutral wire. Consult your local electrical codes.
4. Montirajte tajmer: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
5. Vrati snagu: Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.

Rad i programiranje

The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.

1. Postavljanje trenutnog vremena i dana

1. Pritisnite tipku SAT gumb. Prikaz vremena će treptati.
2. Koristite SAT i MINUTA tipke za podešavanje trenutnog vremena.
3. Pritisnite tipku DAN gumb za postavljanje trenutnog dana u tjednu.
4. Pritisnite SAT again to save and exit, or wait a few seconds for it to save automatically.

2. Programiranje događaja UKLJUČENO/ISKLJUČENO

The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.

1. Pritisnite tipku PROG button. The display will show "1 ON".
2. Koristiti SAT, MINUTA, i DAN buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
3. Pritisnite PROG ponovno. Na zaslonu će se prikazati "1 ISKLJUČENO".
4. Set the desired OFF time and day(s) for Program 1 using the SAT, MINUTA, i DAN gumbi.
5. Repeat steps 1-4 for additional programs (2 ON/OFF through 6 ON/OFF).
6. After setting all desired programs, press SAT za povratak na normalan rad.

3. Ručno poništavanje

To manually turn the connected device ON or OFF outside of programmed times, press the UKLJUČENO/ISKLJUČENO button. This will temporarily override the current program until the next scheduled ON or OFF event.

4. Random Setting Feature

The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.

Održavanje

The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.

• Zamjena baterije: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
• Čišćenje: Clean the timer's surface with a soft, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.

Rješavanje problema

Tehnički podaci

• Marka: Intermatic
• Broj modela: SS7C
• Težina artikla: 0.35 funti
• Broj postavki: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
• Veličina zaslona: 1.5 inča
• Boja: Bijela
• Proizvođač: INTERMATIC INC
• UPC: 078275056732
• ASIN: B0000BYDA2

Jamstvo i podrška

This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a 1-godišnje ograničeno jamstvo proizvođača od datuma kupnje. Ovo jamstvo pokriva nedostatke u materijalu i izradi pri normalnoj uporabi.

For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.

For the most up-to-date support information, please visit the official Intermatic webweb-mjesto ili pogledajte kontaktne podatke navedene na pakiranju proizvoda.