Electro-Harmonix 9V Power Supply (Standard) US9DC-100

1. Proizvod je gotovview

The Electro-Harmonix 9V Power Supply (Model US9DC-100) is designed to provide reliable power to compatible Electro-Harmonix effects pedals. This power supply converts standard 120V AC household current to 9V DC, featuring a 1/8 inch (3.5mm) tip-positive plug for specific pedal models.

Ključne karakteristike:

• Class 2 transformer for safe operation.
• Input: 120V AC, 60Hz, 55mA.
• Izlaz: 9V DC, 100mA.
• Equipped with a 1/8 inch (3.5mm) tip-positive plug.

Kompatibilnost:

This power supply is compatible with Electro-Harmonix pedals requiring a 9V DC, 100mA power source with a 1/8 inch (3.5mm) tip-positive plug. Known compatible models include:

• Big Muff Pi (Classic)
• Octave Multiplexer
• Mali klon
• Small Stone
• Bassballs
• Double Muff
• Dr. Q
• Mini Q-Tron
• Pulsar

Important: This power supply is NOT compatible with pedals requiring a standard 2.1mm barrel connector with a center-negative polarity, such as the Bass Big Muff Pi or Nano Soul Preacher. Always verify the power requirements and connector type of your pedal before use.

An image showing the Electro-Harmonix 9V Power Supply. The power adapter is black with the Electro-Harmonix logo and specifications printed on it. The output cable terminates in a 1/8 inch (3.5mm) tip-positive barrel connector.

2. Upute za postavljanje

1. Provjerite kompatibilnost: Before connecting, ensure your Electro-Harmonix pedal requires a 9V DC, 100mA power supply with a 1/8 inch (3.5mm) tip-positive connector. Refer to your pedal's manual for specific power requirements.
2. Connect to Pedal: Insert the 1/8 inch (3.5mm) plug of the power supply into the power input jack of your Electro-Harmonix pedal. Ensure a secure connection.
3. Spojite na utičnicu: Plug the power supply's AC prongs into a standard 120V AC, 60Hz wall outlet.
4. Uključivanje: Your pedal should now receive power. If your pedal has a power indicator light, it should illuminate.

3. Upute za rad

Once connected, the power supply provides continuous 9V DC power to your compatible pedal. No further user interaction is required for its operation.

Sigurnosne mjere opreza:

• Use only with compatible Electro-Harmonix pedals as specified.
• Do not expose the power supply to water or excessive moisture.
• Avoid dropping or subjecting the power supply to severe impacts.
• Do not attempt to open or modify the power supply unit. There are no user-serviceable parts inside.
• Unplug the power supply from the wall outlet when not in use for extended periods.
• Osigurajte da je utičnica lako dostupna za brzo isključivanje ako je potrebno.

4. Održavanje

The Electro-Harmonix 9V Power Supply requires minimal maintenance.

• Čišćenje: Disconnect the power supply from both the wall outlet and the pedal. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
• Skladištenje: Kada se ne koristi, napajanje pohranite na hladnom i suhom mjestu, dalje od izravne sunčeve svjetlosti i ekstremnih temperatura. Izbjegavajte čvrsto namatanje kabela kako biste spriječili oštećenja.

5. Rješavanje problema

If you encounter issues with your Electro-Harmonix 9V Power Supply, consider the following:

• Pedal Not Powering On:
  • Ensure the power supply is securely plugged into both the wall outlet and the pedal.
  • Verify the wall outlet is functional by testing it with another device.
  • Confirm that the power supply is the correct model (US9DC-100) and that your pedal requires a 9V DC, 1/8 inch (3.5mm) tip-positive connector. Incorrect polarity or connector type will prevent operation.
  • Test the pedal with a fresh 9V battery (if applicable) to rule out a pedal malfunction.
• Zujanje ili buka:
  • Ensure the power supply cable is not running parallel to audio cables, which can induce noise.
  • Try plugging the power supply into a different wall outlet, preferably on a different circuit, to rule out ground loop issues.
  • Ensure the power supply is not overloaded by connecting it to an incompatible pedal or device.
• Labava veza:
  • If the plug feels loose in the pedal's jack, it might indicate wear on either the plug or the jack. Ensure the plug is fully inserted.

If problems persist after following these steps, contact Electro-Harmonix customer support.

6. Specifikacije

7. Jamstvo i podrška

Electro-Harmonix products are designed for durability and performance. For information regarding warranty coverage, service, or technical support, please refer to the official Electro-Harmonix webweb-mjesto ili se izravno obratite njihovoj službi za korisnike.

When contacting support, please have your product model number (US9DC-100) and any relevant purchase information available.