Upute za uporabu Delta Axlerodz vijčanih biciklističkih ražnjića

1. Proizvod je gotovview

The Delta Axlerodz Bolt-On Bicycle Skewers are designed to enhance the security of your bicycle wheels by replacing standard quick-release skewers. This system utilizes a 5mm Allen key for installation and removal, providing a deterrent against wheel theft. The skewers are constructed from durable materials, including stainless springs and chromoly axle material, ensuring long-lasting performance.

Figure 1.1: Delta Axlerodz Bolt-On Bicycle Skewers in their retail packaging, highlighting key features and specifications.

Slika 1.2: Detaljan view of the Delta Axlerodz Security Skewers, designed to prevent bicycle wheel theft.

2. Sigurnosne informacije

UPOZORENJE: Incorrect installation can result in serious injury. Installation should be performed only by a trained bicycle technician or an individual with sufficient mechanical aptitude and experience in bicycle maintenance.

• Always ensure the skewers are tightened to the specified torque of MAKSIMALNO 8.5 Nm. Overtightening or undertightening can compromise safety.
• Regularly inspect the skewers for any signs of wear, damage, or corrosion. Replace immediately if any issues are detected.
• Ensure compatibility with your bicycle's frame dropouts. These skewers are designed for most standard 9mm dropouts.
• After installation, perform a thorough check of the wheels to ensure they are securely fastened and spin freely without obstruction.

3. Postavljanje i instalacija

This section provides instructions for installing the Delta Axlerodz Bolt-On Bicycle Skewers. A 5mm Allen key is required for this procedure.

3.1. Provjera kompatibilnosti

Before installation, verify that your bicycle's frame dropouts are compatible with the Axlerodz skewers. These skewers are designed for standard 9mm quick-release wheel hubs.

• Front Dropout Dimensions: 95mm MIN – 115mm MAX
• Rear Dropout Dimensions: 132mm MIN – 154mm MAX

Figure 3.1: Diagram illustrating the compatible frame dropout dimensions for the Axlerodz skewers.

Figure 3.2: The Axlerodz skewer head, demonstrating compatibility with standard 9mm dropouts.

3.2. Koraci instalacije

1. Remove Existing Skewers: If your bicycle has quick-release skewers, open the quick-release lever and remove the wheel from the frame/fork. Carefully remove the existing skewer from the wheel hub.
2. Prepare Axlerodz Skewer: Disassemble the Axlerodz skewer by removing the end nut and spring. Ensure the springs are oriented correctly (narrow end towards the hub).
3. Insert Skewer: Insert the Axlerodz skewer through the hollow axle of your wheel hub. Place one spring on each side of the hub, followed by the conical nuts.
4. Position Wheel: Place the wheel back into the bicycle's frame (for the rear wheel) or fork (for the front wheel), ensuring the axle sits correctly in the dropouts.
5. Tighten Skewer: Using a 5mm Allen key, tighten the conical nut on the skewer. Alternate tightening each side if necessary to ensure even pressure.
6. Specifikacija zakretnog momenta: Tighten the skewer to a maximum torque of 8.5 Nm. Nemojte previše zatezati.
7. Provjerite sigurnost: After tightening, attempt to move the wheel side-to-side to ensure it is firmly secured within the dropouts and does not wobble. The wheel should spin freely without rubbing against the brake pads or frame.

Figure 3.3: Visual representation of the secure design, durable construction, and quick assembly method using a 5mm Allen key.

4. Operacija

The Delta Axlerodz skewers are designed for a "set and forget" operation, providing enhanced security. Unlike quick-release skewers, they require a tool for removal, which deters opportunistic theft.

• To remove a wheel, simply use a 5mm Allen key to loosen the skewer nut until the wheel can be disengaged from the dropouts.
• To re-install, follow the "Installation Steps" in Section 3.2, paying close attention to the torque specification.

5. Održavanje

Proper maintenance ensures the longevity and continued security of your Axlerodz skewers.

• Redoviti pregled: Periodically check the skewers for any signs of bending, cracking, rust, or stripped threads. Inspect the springs for deformation.
• Čišćenje: Clean the skewers with a damp cloth to remove dirt and grime. Avoid harsh chemicals that could damage the material.
• Podmazivanje: A light application of grease on the skewer threads can facilitate smoother tightening and prevent corrosion.
• Provjera zakretnog momenta: After initial rides and periodically thereafter, re-check the skewer torque with a torque wrench to ensure it remains at 8.5 Nm. Vibrations from riding can sometimes cause components to loosen.
• Skladištenje: If removing wheels for storage or transport, store the skewers and springs together to prevent loss.

6. Rješavanje problema

7. Specifikacije proizvoda

8. Informacije o jamstvu

Delta products are designed and engineered in the US. While specific warranty details are not provided in the immediate product information, Delta Cycle typically offers a warranty against defects in materials and workmanship. Please refer to the official Delta Cycle website or contact their customer support for detailed warranty terms and conditions.

The product specifications mention a "Warranty Description: 2". This typically refers to a 2-year warranty period. Please confirm with the manufacturer for precise details.

9. Korisnička podrška

For further assistance, technical support, or to inquire about replacement parts, please contact Delta Cycle customer service. You can often find contact information on the product packaging or the official Delta Cycle webmjesto.

Posjetite Delta Store on Amazon za više informacija i proizvoda.

For over 35 years, Delta has been a trusted brand in bicycle accessories, known for US-based design and engineering.