Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle Instruction Manual

1. Uvod i krajview

The Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle is designed to provide safe and reliable electrical connections in residential and commercial environments. This receptacle complies with the 2011 National Electrical Code (NEC) Article 406.12, which mandates tamper-resistant receptacles in dwelling units to enhance safety, particularly for children.

Ključne značajke uključuju:

• Tampdizajn otporan na er za veću sigurnost.
• Durable, impact-resistant thermoplastic face and back body.
• Decorator style for modern aesthetics.
• Easy installation with backed-out terminal screws and built-in wire stripper.

2. Sigurnosne informacije

UPOZORENJE: Risk of electric shock or electrocution. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. If you are unsure about any part of these instructions, consult a qualified electrician.

• Always disconnect power at the main service panel before working with electrical wiring.
• Koristite odgovarajuću osobnu zaštitnu opremu (OZO), kao što su izolirane rukavice i zaštitne naočale.
• Provjerite jesu li svi spojevi žica sigurni i pravilno izolirani.
• Ne prekoračujte navedene električne nazivne vrijednosti uređaja.
• Ovaj uređaj je namijenjen samo za unutarnju upotrebu.
• Comply with all local and national electrical codes.

3. Sadržaj paketa

The package contains one (1) Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle.

4. Instalacija

Follow these steps for proper installation of your Eaton TR1107W receptacle:

1. Isključite napajanje: Locate the circuit breaker or fuse that controls the power to the outlet where you will be installing the receptacle. Turn it OFF. Verify power is off using a voltage tester.
2. Uklonite staru utičnicu (ako je primjenjivo): Carefully remove the wallplate and unscrew the old receptacle from the electrical box. Disconnect the wires, noting which wire was connected to which terminal.
3. Pripremite žice: Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. The receptacle features a built-in wire stripper for No.14 and No.12 wire to assist with this step.
4. Spojite žice: The Eaton TR1107W receptacle supports side-wire connections and accepts up to No.10 solid wire. Terminal screws are backed out and ready for wiring.
   • Spojite zelena ili gola bakrena žica za uzemljenje to the green grounding screw.
   • Spojite bijela (neutralna) žica to the silver-colored terminal screws.
   • Spojite crna (vruća) žica to the brass-colored terminal screws.
   Provjerite jesu li svi spojevi čvrsti i sigurni.
5. Priključak za montažu: Carefully fold the wires into the electrical box. Insert the receptacle into the box and secure it with the mounting screws provided. The extra long and extra wide mounting straps aid in stable installation.
6. Ugradnja zidne ploče: Attach a compatible decorator wallplate (not included) over the receptacle.
7. Vrati snagu: Turn the power back ON at the circuit breaker or fuse box. Test the receptacle to ensure proper operation.

Slika 1: Prednja strana view of the Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle. This image highlights the decorator style and the two tamputičnice otporne na er.

5. Operacija

The Eaton TR1107W is a tamper-resistant receptacle. This means it has an internal shutter mechanism that prevents foreign objects from being inserted into the slots. To insert a plug, apply even pressure to both prongs simultaneously. This will open the shutters and allow the plug to enter. If a plug does not insert easily, ensure both prongs are aligned and apply firm, even pressure.

6. Održavanje

The Eaton TR1107W receptacle requires minimal maintenance. Periodically inspect the receptacle and wallplate for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power at the circuit breaker and replace the device immediately. Clean the surface with a soft, damp krpom; izbjegavajte abrazivna sredstva za čišćenje ili otapala.

7. Rješavanje problema

• No Power at Receptacle:
  • Check the circuit breaker or fuse for the circuit. Reset the breaker or replace the fuse if tripped/blown.
  • Ensure all wire connections to the receptacle are secure. Turn off power before checking connections.
  • Test the receptacle with a known working appliance.
• Plug Difficult to Insert:
  • This is normal for tamper-resistant receptacles. Ensure both prongs of the plug are aligned and apply firm, even pressure simultaneously.
  • Do not force the plug, as this can damage the receptacle or the plug.
• Receptacle is Hot to the Touch:
  • Immediately disconnect power to the circuit. This could indicate an overload or a faulty connection. Consult a qualified electrician.

8. Specifikacije

9. Jamstvo i podrška

For warranty information and technical support, please contact Eaton customer service directly. Refer to the official Eaton webnajnovije kontaktne podatke i jamstvene uvjete potražite na web-mjestu ili pakiranju proizvoda.

Eaton Webstranica: www.eaton.com