Perel E305DIN1 DIN Rail Week Timer Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2. Značajke

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

• Daily and Weekly Programming: Allows for flexible scheduling across days and weeks.
• 8 ON/OFF Program Locations: Configure up to 8 distinct ON and OFF switching times.
• LCD zaslon: Clear display of time, day of the week, and current operating status.
• NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outages.
• 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
• Mogućnosti montaže: Designed for DIN rail mounting or wall mounting using the included bracket.
• Prozirni zaštitni poklopac: Provides protection for the display and controls.

3. Postavljanje i instalacija

Upozorenje: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 Montaža

The E305DIN1 timer can be mounted in two ways:

• Montaža na DIN šinu: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
• Montaža na zid: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 Električni priključak

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
3. Double-check all connections for tightness and correctness before restoring power.

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. Upute za rad

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

4.1 Postavljanje trenutnog vremena i dana

1. Pritisnite tipku SAT dugme.
2. Dok drži SAT, pritisnite DAN gumb za postavljanje trenutnog dana u tjednu.
3. Dok drži SAT, pritisnite SAT gumb za postavljanje trenutnog sata.
4. Dok drži SAT, pritisnite MIN gumb za postavljanje trenutne minute.

4.2 Programiranje vremena uključivanja/isključivanja

The timer allows for up to 8 ON/OFF program pairs.

1. Pritisnite tipku PROG button once to enter program mode. The display will show '1 ON'.
2. Koristite DAN, SAT, i MIN tipke za postavljanje željenog vremena uključivanja za program 1.
3. Pritisnite PROG ponovno. Na zaslonu će se prikazati '1 ISKLJUČENO'.
4. Koristite DAN, SAT, i MIN tipke za postavljanje željenog vremena isključivanja za program 1.
5. Repeat steps 1-4 for programs 2 through 8.
6. Pritisnite tipku SAT button to exit program mode and return to normal operation.

4.3 Manual Override Function

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

• Pritisnite tipku PRIRUČNIK gumb za kruženje kroz načine rada:
• NA: The output is continuously ON, overriding any programmed OFF times.
• OFF: The output is continuously OFF, overriding any programmed ON times.
• AUTOMOBIL: Tajmer radi prema programiranim rasporedima UKLJUČIVANJA/ISKLJUČIVANJA.

5. Održavanje

The Perel E305DIN1 timer requires minimal maintenance.

• Čišćenje: Obrišite vanjštinu mekom, suhom krpom. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.
• Sigurnosna kopija baterije: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outages, the battery may need replacement by a qualified technician.
• Uvjeti okoliša: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

6. Rješavanje problema

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

• Tajmer se ne uključuje/isključuje kako je programirano:
  • Provjerite je li timer uključen AUTO mode. If it's in ON or OFF manual override, it will ignore programs.
  • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
  • Ensure the current time and day are accurately set on the timer.
• Zaslon je prazan ili treperi:
  • Check the main power supply to the timer.
  • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
• Timer gubi postavke nakon nestanka strujetage:
  • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
• Time drift (timer becomes inaccurate over time):
  • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

Ako ovi koraci ne riješe problem, obratite se korisničkoj podršci.

7. Specifikacije

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

8. Jamstvo i podrška

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

Sačuvajte račun kao dokaz o kupnji u svrhu jamstva.