Rain Bird RSD-BEX Rain Sensor User Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the Rain Bird RSD-BEX Rain Sensor. The RSD-BEX is designed to automatically measure precipitation and prevent irrigation systems from watering during rainy conditions, thereby conserving water and extending the life of your irrigation system. It is compatible with 24VAC residential and commercial irrigation controllers.

2. Proizvod je gotovview

The Rain Bird RSD-BEX Rain Sensor features a durable, UV-resistant polymer body and an aluminum latching bracket for secure mounting. It includes a 25-foot extension wire for flexible installation.

Slika 2.1: Rain Bird RSD-BEX Rain Sensor with its aluminum mounting bracket and attached extension wire. The sensor unit is visible on the left, connected to the bracket, with the gray wire extending to the right.

Ključne karakteristike:

• Multiple Rainfall Settings: Adjustable from 1/8" to 3/4" (5-20mm) with a twist dial.
• Podesivi prsten za ventilaciju: Controls the drying time of the hydroscopic discs.
• Izdržljiva konstrukcija: High-grade, UV-resistant polymer body and rugged aluminum 5-inch bracket.
• Extended Wire: 25 feet (7.6 m) of UV-resistant extension wire for easy connection.
• Kompatibilnost: Works with all popular 24VAC controllers and pump start relays.

Slika 2.2: Krupni plan view of the Rain Bird RSD-BEX Rain Sensor unit. The label "Rain Bird Corp. 24 VAC RSD-BEX Rain Sensor" is clearly visible, along with regulatory marks (UL, cUL, CE, EAC) and "Made in Mexico".

3. Specifikacije

4. Postavljanje i instalacija

Proper installation is crucial for the optimal performance of your Rain Bird RSD-BEX Rain Sensor. Ensure the sensor is installed in an area that accurately reflects rainfall and is not obstructed.

4.1 Mjesto montiranja

• Choose a location that is exposed to unobstructed rainfall, away from eaves, trees, or overhangs that might block rain.
• The sensor should be mounted vertically, ensuring the top of the sensor is level.
• Consider accessibility for future adjustments or maintenance.

Slika 4.1: The Rain Bird RSD-BEX Rain Sensor attached to its aluminum bracket, ready for mounting. The sensor's top cap is visible, designed to collect rainfall.

4.2 Upute za ožičenje

The RSD-BEX sensor connects to your 24VAC irrigation controller. It comes with 25 feet of two-conductor wire.

1. Locate the sensor terminals on your irrigation controller. These are typically labeled "Sensor" or "Rain Sensor." Consult your controller's manual for specific wiring diagrams.
2. Connect one wire from the RSD-BEX sensor to one of the sensor terminals on the controller.
3. Connect the second wire from the RSD-BEX sensor to the other sensor terminal. The polarity typically does not matter for rain sensors.
4. Osigurajte da su svi spojevi sigurni i zaštićeni od vlage.

Slika 4.2: The 25-foot (7.6m) UV-resistant two-conductor extension wire provided with the Rain Bird RSD-BEX Rain Sensor, coiled for packaging. This wire facilitates flexible placement of the sensor relative to the irrigation controller.

Bilješka: The RSD-BEX is designed for use with Rain Bird electronics technology. It is not designed for other brand applications. It is suitable to switch up to ten 24VAC, 7VA solenoid valves per station, plus one master valve.

5. Operacija

The Rain Bird RSD-BEX Rain Sensor operates by detecting rainfall and interrupting the irrigation cycle when a preset amount of rain has fallen.

5.1 Adjusting Rainfall Settings

The sensor features a twist dial on the top to set the desired rainfall accumulation before irrigation is suspended. Settings range from 1/8" to 3/4" (5-20mm).

1. Locate the twist dial on the top of the sensor unit.
2. Rotate the dial to align the indicator with your desired rainfall setting. For example, select 1/4" if you want irrigation to stop after 1/4 inch of rain has fallen.
3. The sensor will automatically reset once the internal hydroscopic discs dry out.

5.2 Adjusting Drying Time

An adjustable vent ring allows you to control how quickly the internal hydroscopic discs dry out, which in turn affects how soon the irrigation system can resume operation after rain has stopped.

• To allow for faster drying, open the vent ring.
• To slow down drying, close the vent ring.
• Adjust this setting based on your local climate and soil conditions.

6. Održavanje

The Rain Bird RSD-BEX Rain Sensor is designed for minimal maintenance. However, periodic checks can ensure its continued reliability.

• Očistite ostatke: Periodically inspect the sensor's top cap and vent ring for any leaves, dirt, or other debris that might obstruct rainfall or airflow. Gently remove any obstructions.
• Provjerite ožičenje: Ensure the wiring connections remain secure and free from damage or corrosion.
• Provjerite radnju: During dry periods, you can manually test the sensor by pouring a small amount of water into the top cap to simulate rainfall. Observe if the irrigation system is suspended.

7. Rješavanje problema

8. Jamstvo i podrška

For warranty information and technical support, please refer to the official Fluidra or Rain Bird webweb-mjesto ili se izravno obratite njihovoj korisničkoj službi. Sačuvajte račun kao dokaz o kupnji.

Proizvođač: kišna ptica

Marka: Fluidra