Antari Z-800 II Fog Machine User Manual

1. Uvod

The Antari Z-800 II Fog Machine is a compact and efficient device designed to produce a steady, continuous output of fog for various applications, including smaller venues, DJs, and personal events. This manual provides essential information for the safe and effective operation, setup, maintenance, and troubleshooting of your Z-800 II fog machine.

Važne sigurnosne informacije

• Always disconnect the main power plug before opening for service or changing the fuse. Refer servicing to qualified service personnel.
• Never operate your machine without liquid in the tank.
• Use only original smoke fluid. Non-compliance with this warning may result in damage to your machine and will void the warranty.
• Keep the machine dry while plugged in.
• Do not aim towards faces or directly at people.
• Osigurajte odgovarajuću ventilaciju oko stroja tijekom rada.

2. Proizvod je gotovview

The Antari Z-800 II features cutting-edge technology for mobility and portability, offering a fast warm-up time and continuous fog output. Its high-efficiency power control system reduces electricity consumption by 20% compared to previous models.

Ključne karakteristike:

• 800-Watt Heater for efficient fog production.
• ECO advanced thermal control system for auto-reheat functionality.
• Continuous output capability for consistent atmospheric effects.
• Kompaktan i prenosiv dizajn.
• Wired remote control (Z-10) included.
• Optional remote controls available (Z-40 Timer Remote, Z-50 Wireless Remote).

Komponente:

The image above displays the Antari Z-800 II Fog Machine. It features a robust silver and black casing, a sturdy carrying handle, and a transparent fluid reservoir on top. A wired remote control, equipped with an ON/OFF toggle switch and indicator lights, is connected to the side of the machine. Vents are visible on the sides and top for heat dissipation, and the fog output nozzle is located at the front.

3. Postavljanje

1. Raspakiranje: Carefully remove the fog machine and all accessories from its packaging. Inspect for any signs of damage.
2. Plasman: Place the machine on a flat, stable, and heat-resistant surface. Ensure there is adequate space around the unit for ventilation (at least 60cm clearance). Do not place the machine on carpet or other flammable materials.
3. Punjenje tekućinom: Unscrew the cap of the fluid reservoir. Carefully pour Antari FLR or FLG liquid into the reservoir. Do not overfill. Ensure the dip tube is fully submerged in the fluid. Securely screw the cap back on.
4. Daljinska veza: Connect the Z-10 wired remote control to the designated port on the back of the fog machine.
5. Priključak za napajanje: Plug the power cord into a grounded electrical outlet (AC100V/AC120V/AC230V/AC240V 50Hz-60Hz).

4. Upute za rad

1. Uključivanje: Flip the main power switch on the back of the unit to the 'ON' position. The machine will begin to warm up.
2. Vrijeme zagrijavanja: The initial warm-up time is approximately 100 seconds. The indicator light on the remote control will illuminate when the machine is ready to produce fog.
3. Producing Fog: Once the ready indicator light is on, press and hold the button on the Z-10 remote control to emit fog. Release the button to stop fog production.
4. Kontinuirani izlaz: The Z-800 II is designed for continuous output, meaning it can produce fog as long as the button is held down and the fluid level is sufficient, without requiring reheating cycles during operation.
5. Optional Remotes: If using the optional Z-40 Timer Remote or Z-50 Wireless Remote, refer to their respective instructions for specific operation details. These remotes offer timed intervals or wireless activation.
6. Isključivanje: After use, turn off the main power switch on the back of the machine and disconnect it from the power outlet.

5. Održavanje

Regular maintenance ensures the longevity and optimal performance of your Antari Z-800 II Fog Machine.

Upravljanje tekućinama:

• Always use high-quality, water-based fog fluid specifically designed for fog machines, such as Antari FLR or FLG liquid. Using other types of fluid can damage the machine and void the warranty.
• Ne miješajte različite vrste tekućine za maglu.
• Store fog fluid in a cool, dark place, away from direct sunlight and extreme temperatures.
• If the machine will not be used for an extended period, drain the fluid reservoir and run the machine with distilled water for a few minutes to clean the pump and heater coil.

Čišćenje:

• Regularly clean the exterior of the machine with a soft, dry cloth.
• Ensure the air vents are free from dust and debris to prevent overheating.
• Ne uranjajte stroj u vodu ili bilo koju drugu tekućinu.

6. Rješavanje problema

If problems persist after attempting these solutions, contact Antari customer support or a qualified service technician.

7. Specifikacije

8. Jamstvo i podrška

Antari products are manufactured to high-quality standards. For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Antari webstranicu. Sačuvajte dokaz o kupnji za bilo kakve reklamacije u jamstvenom roku.