Progress Lighting 2-Light Flush Mount Ceiling Light Fixture User Manual

1. Uvod

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Progress Lighting 2-Light Flush Mount Ceiling Light Fixture, Model P3925-09. This fixture is designed to provide ambient illumination in various interior spaces such as kitchens, hallways, bedrooms, and living rooms. Please read all instructions carefully before beginning installation.

Figure 1: Progress Lighting 2-Light Flush Mount Ceiling Light Fixture (Model P3925-09)

2. Važne sigurnosne informacije

Kako biste smanjili rizik od požara, strujnog udara ili tjelesnih ozljeda, uvijek slijedite ove osnovne sigurnosne mjere:

• UPOZORENJE: Turn off electrical power at the circuit breaker or fuse box before installing or servicing the fixture.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring installations.
• Ovaj uređaj je namijenjen samo za unutarnju upotrebu.
• Do not install this fixture in wet locations. It is cCSAus damp-location listed, suitable for damp environments like bathrooms or covered porches, but not direct water exposure.
• Always use bulbs of the correct wattage and type as specified in the product specifications.
• Pažljivo rukujte staklenim dijelovima kako biste spriječili lomljenje.
• Prijedlog 65 Upozorenje: Ovaj proizvod može sadržavati kemikalije za koje država Kalifornija zna da uzrokuju rak i urođene nedostatke ili drugu reproduktivnu štetu.

3. Sadržaj paketa

Verify that all components listed below are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.

Figure 2: Diagram of fixture components and assembly steps.

Uključene komponente:

• Mounting strap for outlet box
• Pribor za montažu (vijci, matice)
• Fixture body with pre-wired electrical leads
• Alabaster glass dome shade
• Decorative finial
• List s uputama za instalaciju

Napomena: Žarulje nisu uključene i moraju se kupiti zasebno.

4. Upute za instalaciju

Follow these steps to install your ceiling light fixture. It is recommended to have a second person assist during installation to ensure safety and ease of handling.

1. Isključite napajanje: Before starting, ensure the electrical power to the junction box is turned off at the main circuit breaker or fuse box.
2. Priprema montaže: Attach the mounting strap to the outlet box using the provided screws. Ensure the mounting strap is securely fastened.
3. Žičani spojevi: Carefully connect the fixture's electrical wires to the corresponding house wires using the provided wire nuts.
   • Spojite crnu žicu iz rasvjetnog tijela na crnu (faznu) žicu iz utičnice.
   • Spojite bijelu žicu iz rasvjetnog tijela na bijelu (neutralnu) žicu iz utičnice.
   • Connect the copper ground wire from the fixture to the green or bare copper ground wire from the outlet box.
   Provjerite jesu li sve veze sigurne.
4. Tijelo nosača: Carefully tuck the wires into the outlet box. Align the fixture body with the mounting strap and secure it using the provided screws.
5. Postavite žarulje: Screw two 75-watt maximum, medium base (E26) bulbs or LED equivalents (sold separately) into the sockets.
6. Pričvrstite stakleno sjenilo: Place the alabaster glass dome shade onto the fixture body. Secure it with the decorative finial by screwing it onto the threaded rod at the bottom of the fixture. Do not overtighten.
7. Vrati snagu: Once installation is complete, turn the electrical power back on at the circuit breaker or fuse box.

Figure 3: Detailed installation sheet for Model P3925-09.

5. Operating Your Light Fixture

This fixture operates like a standard ceiling light. Once installed and power is restored, it can be controlled via a wall switch (not included).

• Uključeno/isključeno: Upotrijebite spojeni zidni prekidač za uključivanje ili isključivanje rasvjetnog tijela.
• Zatamnjenje: If using dimmable bulbs and a compatible dimmer switch (both sold separately), you can adjust the light intensity to create your desired ambiance.

6. Održavanje

Redovito održavanje pomoći će u očuvanju izgleda i funkcionalnosti vaše rasvjete.

• Čišćenje: To clean the fixture, turn off the power and allow it to cool. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or pads, as they may damage the finish.
• Zamjena žarulje:
  1. Isključite napajanje rasvjetnog tijela na prekidaču.
  2. Carefully unscrew the decorative finial at the bottom of the glass shade.
  3. Remove the glass shade.
  4. Unscrew the old bulbs and replace them with new 75-watt maximum, medium base (E26) bulbs or LED equivalents.
  5. Reattach the glass shade and secure it with the decorative finial.
  6. Vratite napajanje na uređaj.

7. Rješavanje problema

If your fixture is not operating correctly, refer to the following table for common issues and solutions:

8. Specifikacije proizvoda

Figure 4: Dimensional drawing of the fixture, showing 13-1/4" diameter and 5-7/8" height.

Slika 5: Krupni plan view of the brushed nickel finial at the base of the glass shade.

Slika 6: Krupni plan view of the brushed nickel rim of the fixture.

9. Informacije o jamstvu

This Progress Lighting fixture is backed by a 1-godišnje ograničeno jamstvo. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation included with your product or contact Progress Lighting customer support.

10. Korisnička podrška

For further assistance, technical support, or to inquire about replacement parts, please visit the official Progress Lighting store or contact their customer service department.

Progress Lighting Store: Posjeti trgovinu