Telwin ALPINE 30

Telwin Alpine 30 BOOST Car Battery Charger User Manual

Model: ALPINE 30

Uvod

This manual provides essential instructions for the safe and efficient operation of your Telwin Alpine 30 BOOST Car Battery Charger. Please read this manual thoroughly before use and retain it for future reference. This charger is designed for charging free electrolyte (WET) batteries with 12V or 24V voltage.

Sigurnosne upute

  • Always operate the charger in a well-ventilated area.
  • Nosite odgovarajuću osobnu zaštitnu opremu, uključujući zaštitu za oči i rukavice.
  • Prije spajanja ili prekidanja priključaka na bateriju provjerite je li punjač isključen iz električne mreže.
  • Izbjegavajte kratki spoj baterijeamps.
  • Nemojte puniti smrznute baterije.
  • Držite djecu i neovlaštene osobe podalje od područja punjenja.
  • Refer to the vehicle manufacturer's manual for specific battery charging instructions.

Proizvod gotovview

The Telwin Alpine 30 BOOST is a robust battery charger featuring protection against overloads and polarity inversions. It includes a selector for normal and rapid (BOOST) charging modes, along with an ammeter for monitoring the charging process.

Telwin Alpine 30 BOOST Car Battery Charger front view with controls and cables

Slika 1: Telwin Alpine 30 BOOST Car Battery Charger. This image shows the front panel of the charger, including the control knobs, ammeter, and connection terminals for the battery cables.

Postavljanje

  1. Plasman: Position the charger on a stable, level surface in a well-ventilated area, away from flammable materials.
  2. Priprema baterije: Ensure the battery terminals are clean and free of corrosion. If charging a battery in a vehicle, ensure the vehicle's ignition is off and all accessories are disconnected.
  3. Spojite Clamps:
    • Spojite CRVENA pozitivan (+) clamp na pozitivni (+) pol baterije.
    • Spojite CRNI negativni (-) clamp to the negative (-) terminal of the battery. If charging a battery installed in a vehicle, connect the negative clamp na šasiju vozila dalje od akumulatora i dovoda goriva.
  4. Priključak na mrežu: Plug the charger's power cord into a suitable 230V AC, 50/60Hz mains outlet.

Upute za rad

  1. Odaberite Voltage: Koristite voltage selector switch to match the battery voltage (12V ili 24V).
  2. Odaberite način punjenja:
    • Normal Charge: For standard charging of batteries.
    • BOOST (Rapid Charge): For faster charging when time is limited. Use with caution and monitor the battery closely to prevent overcharging.
  3. Početak punjenja: Turn on the charger. The ammeter will indicate the charging current. The current will gradually decrease as the battery charges.
  4. Punjenje monitora: Periodically check the ammeter. When the current drops to a very low level, the battery is nearly fully charged.
  5. Kraj punjenja:
    • Turn off the charger.
    • Isključite punjač iz mrežne utičnice.
    • Disconnect the negative (-) clamp first, then the positive (+) clamp.

Održavanje

  • Čišćenje: Disconnect the charger from the mains before cleaning. Wipe the exterior with a dry, soft cloth. Do not use solvents or abrasive cleaners.
  • Skladištenje: Store the charger in a dry, cool place, away from direct sunlight and moisture. Ensure cables are neatly coiled and not kinked.
  • Pregled kabela: Regularly inspect the power cord and battery cables for any signs of damage, such as cuts or fraying. Do not use the charger if cables are damaged.

Rješavanje problema

ProblemMogući uzrokOtopina
Punjač se ne uključuje.No power from mains outlet.
Neispravan kabel za napajanje.
Check mains outlet with another appliance.
Provjerite je li kabel za napajanje oštećen.
Ammeter shows no current.Neispravno spajanje baterije.
Baterija je potpuno napunjena.
Pregorio unutarnji osigurač.
Provjerite pozitivne i negativne spojeve.
Provjerite voltage.
Za zamjenu osigurača obratite se kvalificiranom tehničaru.
Charger overheats.Loša ventilacija.
Preopterećen strujni krug.
Osigurajte dovoljan protok zraka oko punjača.
Reduce charging load or switch to normal charge mode.

Ako problemi potraju, obratite se kvalificiranom servisnom osoblju.

Tehnički podaci

ModelALPINE 30
MarkaTelwin
Ulazni voltage230 V AC (Single-phase), 240 V
Ulazna frekvencija50/60 Hz
Absorbed Power (Charge)800 W
Naboj Voltage12 V / 24 V DC
Effective Charge Current30 A
Conventional Charge Current (EN60335-2-29)20 A
Min. Battery Capacity15 Ah
Max. Battery Capacity400 Ah
Regulation Positions3
Dimenzije (D x Š x V)22.5 x 29 x 20.5 cm
Težina8.6 kg
Vrsta konektoraSchuko plug (Type F) and battery clamps
Broj priključaka2
Zemlja podrijetlaKina

Informacije o jamstvu

Specific warranty details for the Telwin Alpine 30 BOOST Car Battery Charger are not provided within this manual. Please refer to the warranty card included with your product or contact the retailer/manufacturer for warranty terms and conditions.

Podrška i servis

For technical assistance, spare parts, or service inquiries, please contact your authorized Telwin dealer or visit the official Telwin website. Ensure you have your product model number (ALPINE 30) and serial number (if applicable) ready when contacting support.

© 2023 Telwin. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.