InFocus IN116 Prijenosni DLP projektor Korisnički priručnik

1. Uvod

This manual provides essential information for the safe and efficient operation of your InFocus IN116 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

Sadržaj paketa

Provjerite jesu li sve dolje navedene stavke uključene u vaš paket:

• InFocus IN116 projektor
• Kabel za napajanje
• RGB kabel
• A / V kabel
• Sigurnosne upute
• Korisnički priručnik (ovaj dokument)
• Daljinski upravljač
• HDMI kabel

2. Proizvod je gotovview

The InFocus IN116 is a portable DLP projector designed for various applications, offering a native WXGA (1280 x 800) resolution, 2700 ANSI lumens brightness, and a 3000:1 contrast ratio. It features 3D-ready capabilities and multiple input options for flexible connectivity.

Ključne značajke

• WXGA (1280 x 800) Native Resolution
• 2700 ANSI Lumens (2200 lumens in Eco Mode)
• 3000: Omjer kontrasta 1
• 3D-Ready functionality
• HDMI povezivost
• Dugotrajno lamp za produženu upotrebu
• Easy maintenance with no filters to replace

Komponente projektora

Slika 1: Vrh View. This image displays the top of the InFocus IN116 projector, highlighting the control panel with buttons for power, menu, source selection, and navigation. The lens is visible at the front.

Slika 2: Bočna strana View. This image shows the side of the InFocus IN116 projector, featuring prominent ventilation grilles for heat dissipation.

Slika 3: Prednja strana View. This image presents the front of the InFocus IN116 projector, with the lens actively emitting light, indicating its operational state.

Slika 4: straga View (Connectivity Panel). This image details the rear panel of the InFocus IN116 projector, displaying various input and output ports including HDMI, VGA (Computer In 1 & 2, Computer Out), S-Video, Composite Video, Audio In/Out, RS232C, and Mini USB.

3. Upute za postavljanje

Plasman

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the unit to prevent overheating. The projector can be placed on a table, ceiling-mounted, or used for rear projection.

Spajanje na izvor napajanja

1. Spojite kabel za napajanje na utičnicu za napajanje projektora.
2. Uključite drugi kraj kabela za napajanje u uzemljenu električnu utičnicu.

Connecting Video Sources

The IN116 projector offers multiple input options:

• HDMI: Za digitalni video i audio. Spojite HDMI kabel s izvornog uređaja na HDMI priključak projektora.
• VGA (Computer In 1 & 2): For analog computer signals. Use a VGA cable to connect your computer to either VGA input.
• Kompozitni video: For standard definition video. Connect a composite video cable (yellow RCA) to the projector's Video input.
• S-video: For enhanced standard definition video. Connect an S-Video cable to the projector's S-Video port.

For audio, connect an audio cable from your source to the projector's Audio In (3.5mm stereo) port if using VGA, Composite, or S-Video. HDMI carries both video and audio.

4. Upute za rad

Uključivanje/isključivanje

1. Za uključivanje pritisnite Vlast gumb na upravljačkoj ploči projektora ili daljinskom upravljaču. Indikator napajanja će svijetliti.
2. Za isključivanje, pritisnite Vlast button twice. The projector will enter a cooling cycle before shutting down completely.

Odabir izvora unosa

Pritisnite tipku Izvor button on the projector or remote control to cycle through available input sources (HDMI, VGA1, VGA2, Video, S-Video). The projector will automatically detect an active signal.

Podešavanje slike

• Fokus: Okrećite prsten za fokusiranje na objektivu projektora dok slika ne postane oštra i jasna.
• Zum: Podesite prsten za zumiranje na objektivu projektora kako biste promijenili veličinu slike.
• Korekcija trapezoida: If the image appears trapezoidal, use the keystone correction function (usually found in the OSD menu or via dedicated buttons on the remote) to square the image.
• Načini slike: The projector offers various picture modes (e.g., Presentation, Bright, Movie, Eco Mode). Access these through the OSD menu to optimize image quality for different environments.

Eko način rada

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode, compared to 5,000 hours in normal mode.

3D funkcionalnost

The InFocus IN116 is 3D-ready and supports 3D content from compatible sources, including Blu-ray players. To view 3D content, you will need compatible 3D glasses and a 3D-enabled source device. Refer to your 3D source device's manual for specific setup instructions.

5. Održavanje

Lamp Zamjena

Projektor lamp ima ograničen vijek trajanja. Kada lamp indicator light illuminates or the image brightness significantly decreases, it's time to replace the lamp. Lamp door is conveniently located on top of the projector for easy access, even when ceiling-mounted.

1. Power off the projector and disconnect the power cord.
2. Ostavite projektor da se potpuno ohladi (najmanje 30 minuta).
3. Locate and open the lamp door on the top of the projector.
4. Pažljivo uklonite stari lamp modul.
5. Ugradite novi lamp modul, osiguravajući da je sigurno postavljen.
6. Zatvorite lamp door and reconnect the power cord.
7. Ponovno postavite lamp timer u OSD izborniku projektora.

Oprez: Projektor lamps operate at high temperatures and pressures. Handle with care. In rare cases, lamps can explode. Always wear protective eyewear when replacing a lamp.

Čišćenje

• Vanjski: Koristite meku, damp cloth to clean the projector's exterior. Do not use abrasive cleaners or solvents.
• Objektiv: Use a lens cleaning cloth and lens cleaning solution specifically designed for optical surfaces. Avoid touching the lens with your fingers.
• Filteri: The InFocus IN116 projector is designed to operate without user-replaceable filters, simplifying maintenance.

6. Rješavanje problema

7. Specifikacije

8. Jamstvo i podrška

Ograničeno jamstvo

All new DLP projectors from InFocus, including the IN116, are backed by a comprehensive limited warranty:

• Projektor: 5-godišnje ograničeno jamstvo
• Dijelovi i rad: 2 godina punog jamstva
• Lamp: Jamstvo 6 mjeseci

For detailed terms and conditions of the warranty, please refer to the official InFocus webstranicu ili se obratite korisničkoj podršci.

Korisnička podrška

For technical assistance, troubleshooting, or warranty claims, please contact InFocus customer support. Visit the official InFocus webstranicu za kontakt informacije i dodatne resurse.

Službenik Webstranica: www.infocus.com