Sharp SPC106X

Sharp SPC106X LED Alarm Clock User Manual

Model: SPC106X

1. Uvod

Hvala na kupnjiasing the Sharp SPC106X LED Alarm Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new alarm clock. Please read these instructions thoroughly before using the device.

The Sharp SPC106X features a clear 1.0" blue LED display, an ultra-thin design, and essential alarm functions including snooze. It is designed for indoor use and operates electrically with battery backup capability.

2. Sigurnosne informacije

  • Izvor napajanja: Koristite samo navedeni adapter za napajanje. Provjerite glasnoćutage je kompatibilan s vašim lokalnim napajanjem.
  • Voda i vlaga: Ne izlažite uređaj kiši, vlazi ili kapanju/prskanju tekućina. Ne stavljajte predmete napunjene tekućinama, poput vaza, na uređaj.
  • Ventilacija: Osigurajte pravilnu ventilaciju. Ne blokirajte ventilacijske otvore.
  • toplina: Držite uređaj dalje od izvora topline kao što su radijatori, grijalice, peći ili drugi uređaji (uključujući amplifiers) koji proizvode toplinu.
  • Čišćenje: Čistite samo suhom krpom.
  • baterije: If using backup batteries, ensure they are inserted with correct polarity. Remove batteries if the unit is not used for an extended period.

3. Sadržaj paketa

  • Sharp SPC106X LED Alarm Clock Unit
  • Power Adapter (attached)
  • Korisnički priručnik (ovaj dokument)

Note: Batteries are not included and must be purchased separately for backup functionality.

4. Proizvod je gotovview

Familiarize yourself with the components of your Sharp SPC106X alarm clock:

Sharp SPC106X LED Alarm Clock front view

Slika 1: Prednja strana View of Sharp SPC106X LED Alarm Clock. This image displays the front of the black alarm clock with a bright blue 1.0" LED display showing "12:01". Indicators for "PM" and "ALARM" are visible on the left side of the display. The "SHARP" logo is centered below the time. The clock features an ultra-thin design case and a stable base.

Kontrole i indikatori:

  • 1.0" Blue LED Display: Shows current time and alarm time.
  • Pokazatelj PM-a: Lights up when the time displayed is PM.
  • Indikator ALARMA: Lights up when the alarm is set.
  • Tipka VRIJEME: Koristi se za postavljanje trenutnog vremena.
  • Gumb ALARM: Koristi se za postavljanje vremena alarma.
  • Gumb SAT: Adjusts the hour for time or alarm settings.
  • Gumb MIN: Adjusts the minute for time or alarm settings.
  • Tipka ODGOĐER/ZATAMNJIVANJE: Located on top, this button activates snooze during an alarm and adjusts display brightness.
  • Prekidač za uključivanje/isključivanje alarma: Located on the side, this switch enables or disables the alarm.
  • LOUD/SOFT Switch: Located on the side, this switch adjusts the alarm volume.
  • Odjeljak za baterije: Located on the bottom for backup batteries (not included).

5. Postavljanje

5.1. Priključak za napajanje

  1. Raspakirajte budilicu i njezin adapter za napajanje.
  2. Plug the power adapter into a standard household outlet. The LED display will illuminate.
  3. (Optional) For battery backup, open the battery compartment on the bottom of the unit and insert 2 AAA batteries (not included). This will preserve time settings during a power outage.

5.2. Postavljanje trenutnog vremena

  1. Pritisnite i držite VRIJEME gumb. Znamenke sati će početi treptati.
  2. Dok držite VRIJEME pritisnite tipku SAT button repeatedly to advance to the correct hour. Observe the PM indicator for correct AM/PM setting.
  3. Dok još drži VRIJEME pritisnite tipku MIN button repeatedly to advance to the correct minute.
  4. Otpustite VRIJEME gumb. Vrijeme je sada postavljeno.

6. Upute za rad

6.1. Postavljanje alarma

  1. Pritisnite i držite ALARM gumb. Znamenke sati alarma počet će treptati.
  2. Dok držite ALARM pritisnite tipku SAT više puta pritisnite gumb za postavljanje željenog sata alarma. Pratite PM indikator.
  3. Dok još drži ALARM pritisnite tipku MIN više puta pritisnite gumb za postavljanje željene minute alarma.
  4. Otpustite ALARM button. The alarm time is now set.

6.2. Aktiviranje/Deaktiviranje alarma

  • Za aktiviranje alarma, pomaknite UKLJUČIVANJE / ISKLJUČIVANJE ALARMA switch (located on the side) to the "ON" position. The ALARM indicator on the display will light up.
  • Za deaktiviranje alarma, pomaknite UKLJUČIVANJE / ISKLJUČIVANJE ALARMA switch to the "OFF" position. The ALARM indicator will turn off.

6.3. Korištenje funkcije odgode alarma

Kada se oglasi alarm, pritisnite veliki SNOOZE / DIMMER button on top of the clock. The alarm will temporarily pause and sound again after approximately 9 minutes.

6.4. Adjusting Display Brightness (Dimmer)

Pritisnite tipku SNOOZE / DIMMER button (when the alarm is not sounding) to cycle through different brightness levels (High, Low, Off) for the LED display.

6.5. Podešavanje glasnoće alarma

Gurnite GLASNO/TIHO switch (located on the side) to select your preferred alarm volume level.

7. Održavanje

  • Čišćenje: Obrišite uređaj mekom, suhom krpom. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.
  • Zamjena baterije: Replace backup batteries annually or when the display shows signs of dimming during power outages.
  • Skladištenje: Ako sat skladištite dulje vrijeme, izvadite rezervne baterije kako biste spriječili curenje.

8. Rješavanje problema

ProblemMogući uzrokOtopina
Prikaz sata je isključen.Nema snage ili strujetage.Ensure power adapter is securely plugged in. Check household power. If using battery backup, ensure batteries are fresh and correctly inserted.
Alarm se ne oglašava.Alarm nije aktiviran ili je glasnoća preniska.Check if the ALARM ON/OFF switch is in the "ON" position. Verify the ALARM indicator is lit. Adjust the LOUD/SOFT switch to a higher volume.
Time/Alarm cannot be set.Tipke nisu pravilno pritisnute.Ensure you are pressing and holding the TIME or ALARM button while adjusting hours/minutes. Refer to sections 5.2 and 6.1.
Zaslon je previše svijetao/tam.Potrebno je prilagoditi postavku prigušivača.Press the SNOOZE/DIMMER button (when alarm is not sounding) to cycle through brightness levels.

9. Specifikacije

  • Model: SPC106X
  • Marka: Oštar
  • Boja: Crna
  • Vrsta zaslona: Digitalni LED
  • Boja zaslona: Plava
  • Veličina zaslona: 1.0 inča
  • Posebne karakteristike: Alarm, Snooze, Dimmer
  • Dimenzije proizvoda: 2.2"W x 3.9"H (Note: The provided dimensions are for width and height, depth is not specified but implied by the compact design)
  • Izvor napajanja: Electrical Operation (AC powered)
  • Sigurnosna kopija baterije: Da (baterije nisu uključene)
  • Vrsta sobe: Spavaća soba
  • Vrsta montaže: Stolna ploča
  • Materijal okvira: Plastični
  • Težina artikla: 9.6 unci
  • Proizvođač: MZ Berger
  • UPC: 049353612447

10. Jamstvo i podrška

Ograničeno jamstvo

MZ Berger & Company warrants to the original consumer purchaser of this product that it shall be free of defects in material and workmanship for one year from the purchase date. This warranty does not cover damage resulting from tampering, improper use, unauthorized modification, or misuse. This warranty is limited to repair or replacement of the product at MZ Berger's discretion.

To obtain warranty service, you must include a Proof of Purchase (sales receipt or photocopy) and a check or money order for USD $5.00 to cover the cost of handling. Also include your return address and a brief description of the issue. Ship the clock, postage prepaid, na donju adresu:

Servisni centar MZ Berger
29-76 Sjeverni bulevar
Long Island City, NY 11101

Služba za korisnike

Please call Toll Free at 1-(800)-221-0131 for customer service assistance. Available Monday-Friday, 9:00 AM - 4:00 PM EST.

Please do not return the clock to the store without first contacting customer service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.