1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Winjet Street Series LED Tail Lights, model WJ20-0114-05. These tail lights are designed specifically for the Volkswagen Golf GTI MK4 models manufactured between 1999 and 2005. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Figure 1: Winjet Street Series LED Tail Lights installed on a Volkswagen Golf GTI MK4. These lights feature a black housing and smoke lens, enhancing the vehicle's rear aesthetics.
2. Sigurnosne informacije
Upozorenje: Professional installation is highly recommended for this product. Improper installation can lead to electrical issues, damage to the vehicle, or malfunction of the tail lights, potentially compromising vehicle safety.
- Uvijek odspojite akumulator vozila prije početka bilo kakvih električnih radova.
- Provjerite jesu li svi spojevi sigurni i pravilno izolirani kako biste spriječili kratki spoj.
- Verify that the tail lights function correctly (brake, running, turn signals, reverse) before driving.
- Adhere to all local and national regulations regarding vehicle lighting.
3. Sadržaj paketa
Nakon otvaranja paketa, molimo provjerite jesu li sve komponente prisutne i neoštećene:
- One (1) Pair of Tail Lights (Left and Right)
- Two (2) Volt Resistors
4. Upute za instalaciju
These Winjet Street Series LED Tail Lights are designed for direct fitment into the factory location of your 1999-2005 Volkswagen Golf GTI MK4, requiring no modifications. However, professional installation is recommended.
Potrebni alati:
- Basic hand tools (e.g., screwdriver set, socket wrench set)
- Wire strippers/crimpers (if resistors require wiring)
- Električna traka ili termoskupljajuća cijev
Koraci instalacije:
- priprema: Park the vehicle on a level surface and engage the parking brake. Turn off the ignition and disconnect the negative terminal of the vehicle's battery to prevent electrical shorts.
- Access Old Tail Lights: Open the trunk or tailgate. Locate the access panels or retaining screws for the existing tail light assemblies. Remove any covers or fasteners to gain access to the back of the tail light.
- Remove Old Tail Lights: Disconnect the electrical connectors from the old tail light bulbs/assembly. Carefully unbolt or unclip the old tail light assembly from the vehicle body. Gently pull the assembly straight out to avoid damaging paint or bodywork.
- Prepare New Tail Lights: Inspect the new Winjet LED Tail Lights. Ensure the included volt resistors are properly connected or prepared for connection according to the vehicle's wiring system, if necessary.
- Install New Tail Lights: Connect the electrical connectors from the vehicle's wiring harness to the new Winjet LED Tail Light assembly. Ensure a snug and secure connection. If resistors are separate, connect them as per vehicle requirements to prevent hyper-flashing or error codes.
- Mount New Tail Lights: Carefully position the new tail light assembly into the vehicle's opening. Align the mounting points and secure the assembly with the factory bolts or clips. Do not overtighten.
- Ponovite za drugu stranu: Follow steps 2-6 for the opposite tail light assembly.
- Funkcionalnost testiranja: Reconnect the vehicle's battery. Turn on the ignition (do not start the engine) and test all tail light functions: running lights, brake lights, turn signals (left and right), and reverse lights. Ensure all lights illuminate correctly and without error messages.
- Konačna provjera: Once confirmed operational, ensure all wiring is neatly tucked away and secured. Replace any access panels or covers.
Slika 2: Stražnji dio view of the Winjet LED Tail Lights. Note the wiring harness and integrated volt resistors (small black boxes with fans) designed for proper electrical function.
5. Upute za rad
Once properly installed, your Winjet Street Series LED Tail Lights will operate automatically with your vehicle's existing lighting system. They are designed to function as direct replacements for your factory tail lights.
- Svjetla za vožnju: These will illuminate when your vehicle's headlights or parking lights are turned on.
- Stop svjetla: These will illuminate brighter when the brake pedal is pressed.
- Pokazivači smjera: The amber section of the tail light will flash when the turn signal lever is activated.
- Svjetla za vožnju unatrag: The white section will illuminate when the vehicle is shifted into reverse gear.
Regularly check all lighting functions to ensure they are working correctly for safe driving.
6. Održavanje
Winjet LED Tail Lights are designed for durability and minimal maintenance. Follow these guidelines to ensure their longevity and optimal performance:
- Čišćenje: Clean the lens with a soft cloth and mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the polycarbonate lens material.
- Inspekcija: Periodically inspect the tail light assemblies for any signs of damage, cracks, or moisture intrusion. Ensure all mounting bolts remain secure.
- Ožičenje: Check wiring connections periodically for corrosion or looseness, especially after driving through harsh conditions.
- Zaštita od vremenskih uvjeta: The lights feature weather sealing to prevent moisture. If you notice condensation inside the housing, inspect the seals for damage.
7. Rješavanje problema
If you encounter issues with your Winjet LED Tail Lights, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Svjetla ne osvjetljavaju | Labav električni spoj, pregorjeli osigurač, neispravno ožičenje. | Check all wiring connections. Inspect vehicle's fuse box for blown fuses. Verify wiring against vehicle's electrical diagram. |
| Svjetla trepere ili su prigušena | Poor electrical connection, insufficient power, faulty resistor. | Ensure connections are tight. Check vehicle's voltage. Inspect or replace volt resistors if suspected faulty. |
| Hyper-flashing turn signals | Resistor not properly installed or faulty, vehicle's computer detecting low load. | Verify volt resistors are correctly installed and functioning. Consult a professional if the issue persists. |
| Vlaga unutar leće | Compromised weather seal, extreme temperature changes. | Small amounts of condensation may dissipate. If persistent or excessive, inspect seals for damage. Contact support if seals are faulty. |
If these steps do not resolve the issue, please contact Winjet customer support.
8. Specifikacije proizvoda
| Značajka | Detalj |
|---|---|
| Marka | Winjet |
| Broj modela | WJ20-0114-05 |
| Kompatibilnost vozila | 1999-2005 Volkswagen Golf GTI MK4 |
| Vrsta izvora svjetlosti | LED |
| Boja | Black Housing/Smoke Lens |
| Materijal leće | Polikarbonat |
| Položaj autodijela | Stražnji |
| Posebne značajke | Waterproof, DOT Certified Street Legal |
| Voltage | 12 volti |
| Dimenzije proizvoda (D x Š x V) | 21 x 17 x 11 inča |
| Težina artikla | 7 funti |
| OEM brojevi dijelova | 1J6 945 095 F, 1J6 945 096 F |
| UPC | 848524018190, 848063051146 |
9. Informacije o jamstvu
Winjet Street Series LED Tail Lights are covered by a jednogodišnje ograničeno jamstvo od datuma kupnje. Ovo jamstvo pokriva nedostatke u proizvodnji i osigurava da proizvod ispunjava navedene standarde performansi pri normalnoj upotrebi.
For warranty claims or detailed information regarding terms and conditions, please retain your proof of purchase and contact Winjet customer support.
10. Korisnička podrška
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Winjet customer support. You can find contact information on the official Winjet webweb-mjestu ili putem vašeg prodavača.
Winjet is dedicated to providing quality automotive parts and support. For more information about Winjet products and services, visit the Winjet Store on Amazon.