Uvod
The Oasis Atlantis BPO1SHS Hot 'N Cold Bottled Water Cooler is designed to provide convenient access to both hot and cold water. Its contemporary round front design features a durable polyethylene cabinet that resists dents and rust. The integrated WaterGuard system helps prevent spills during bottle changes, ensuring a clean and efficient experience. This unit also includes a removable, dishwasher-safe drip tray for easy cleaning and a handle on the back for simple transport and placement.
Slika: prednja strana view of the Oasis Atlantis BPO1SHS Hot 'N Cold Bottled Water Cooler with a water bottle in place.
Važne sigurnosne informacije
- Uvijek provjerite je li uređaj postavljen na stabilnu, ravnu površinu kako biste spriječili prevrtanje.
- Before plugging in the unit, ensure a water bottle is properly installed and water has filled the internal tanks. Operating the hot tank without water can cause damage.
- Caution: Hot Water. The hot water dispenser provides water at high temperatures. Exercise extreme care when dispensing hot water to avoid burns. The hot water faucet is designed with a child-proof safety feature requiring a push-in and pull action to dispense.
- Keep children away from the hot water dispenser.
- Nemojte koristiti uređaj na otvorenom.
- Isključite hladnjak iz struje prije čišćenja ili bilo kakvog održavanja.
Vodič za postavljanje
- Raspakirajte hladnjak: Pažljivo izvadite hladnjak za vodu iz ambalaže. Pregledajte ima li oštećenja.
- Plasman: Position the cooler on a firm, level surface. Ensure there is adequate space around the unit for ventilation. The cooler includes a handle on the back for easier transport and positioning.
- Postavite bocu vode:
- Remove the protective seal from the top of a new 3 or 5-gallon water bottle. Do not remove the cap if it has a WaterGuard compatible cap (which will be pierced by the probe).
- Lift the water bottle and carefully place it onto the WaterGuard probe at the top of the cooler. Push down firmly until the bottle is seated securely. The WaterGuard system is designed to prevent spills during this process.
- Allow several minutes for the water to fill the internal hot and cold tanks before plugging in the unit. This is crucial to prevent damage to the heating element.
- Priključite napajanje: Once the water tanks are filled, plug the power cord into a grounded electrical outlet.
- Aktivirajte grijanje/hlađenje: Locate the hot and cold water switches (usually on the back of the unit). Turn them ON to begin heating and cooling the water. Allow approximately 15-30 minutes for the water to reach optimal temperatures.
Upute za rad
Image: Dispensing area of the Oasis Atlantis BPO1SHS water cooler, showing hot (red) and cold (blue) water buttons.
Ispuštanje hladne vode:
Place your cup or container under the cold water faucet (typically blue). Press the cold water button or lever to dispense chilled water. Release the button/lever to stop the flow.
Ispuštanje tople vode:
Place your cup or container under the hot water faucet (typically red). This faucet features a child-proof safety mechanism. To dispense hot water, first push the safety button inward, then pull the lever towards you. Release both to stop the flow. Always exercise caution as the water is very hot.
Održavanje
- Čišćenje posude za kapanje: The drip tray is removable and dishwasher safe. Regularly remove and clean the drip tray to prevent water overflow and maintain hygiene. Simply lift the tray out, empty any collected water, wash it with soap and water or place it in the dishwasher, and then reinsert it.
- Vanjsko čišćenje: Obrišite vanjski dio hladnjaka mekom,amp cloth. Avoid abrasive cleaners that could damage the polyethylene cabinet.
- Dezinfekcija: Periodically sanitize the internal water tanks to prevent mineral buildup and ensure fresh-tasting water. Refer to the full product manual for detailed sanitization instructions, which typically involve a water and bleach solution. Ensure thorough rinsing after sanitization.
Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Water not hot or cold | Power switch for heating/cooling is off; unit not plugged in; internal tanks not filled with water; compressor issue. | Ensure unit is plugged in and power switches are ON. Verify water bottle is properly installed and tanks are full before turning on heating/cooling. If problem persists, contact customer support. |
| Water tastes "plastic" or off | New unit odor; need for sanitization. | Sanitize the unit with a water/bleach solution as per the full manual. This often resolves initial taste issues. |
| Unit is unstable or "tippy" | Neravna površina; nepravilno postavljanje. | Place the cooler on a firm, level surface. Adjust its position until stable. |
| Slow cold water flow | Air lock; sediment buildup. | Try dispensing water from both hot and cold faucets to release any air. If persistent, consider sanitization or contacting support. |
Tehnički podaci
| Broj modela | BPO1SHS |
| Marka | Oaza |
| Boja | Crna |
| Materijal | Polietilen (PE) |
| Dimenzije proizvoda | 30"D x 8"Š x 6"V |
| Stil | Samostojeći |
| Wattage | 600 vata |
| Vrsta instalacije | Samostojeći |
| Pristup lokaciji | Vrh |
| Broj postavki | 2 (Vruće, Hladno) |
| Ocjena gornje temperature | 100 Celzijevih stupnjeva |
| Izvor napajanja | Električni na kabel |
| Certifikacija | Energy Star |
| Težina artikla | 0.01 unci |
Note: The "Installation Type" in the raw data listed "Countertop", however, the product images and typical use for these dimensions (30"D x 8"W x 6"H) suggest a freestanding unit, which is reflected above. The "Item Weight" of 0.01 ounces appears to be a data entry error.
Jamstvo i podrška
This Oasis water cooler comes with a Jamstvo 3 godine. For warranty claims, technical support, or service inquiries, please refer to the contact information provided in your product packaging or visit the official Oasis website. Please have your model number (BPO1SHS) and purchase date available when contacting support.