Uvod
The AEG PST 500 X Jigsaw is a robust and versatile electric power tool designed for cutting various materials, primarily wood. Featuring a powerful 440-watt motor and the convenient Fixtec blade change system, this jigsaw offers efficient and precise cutting performance. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your AEG PST 500 X Jigsaw. Please read these instructions carefully before operating the tool and keep them for future reference.
Opće sigurnosne upute
Uvijek slijedite osnovne sigurnosne mjere pri korištenju električnih alata kako biste smanjili rizik od požara, strujnog udara i tjelesnih ozljeda.
- Sigurnost radnog područja: Radno mjesto održavajte čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisutnost zapaljivih tekućina, plinova ili prašine.
- Električna sigurnost: Utikači električnih alata moraju odgovarati utičnici. Nikada nemojte ni na koji način modificirati utikač. Izbjegavajte kontakt tijela s uzemljenim površinama kao što su cijevi, radijatori, štednjaci i hladnjaci.
- Osobna sigurnost: Uvijek nosite zaštitu za oči. Koristite zaštitu za sluh prilikom duljeg rada. Odjenite se prikladno; izbjegavajte široku odjeću ili nakit. Osigurajte dugu kosu.
- Upotreba i njega alata: Ne forsirajte električni alat. Koristite odgovarajući električni alat za svoju primjenu. Isključite utikač iz izvora napajanja prije bilo kakvih podešavanja, promjene pribora ili pohranjivanja električnog alata.
- Sigurnost kod rada s ubodnom pilom: Uvjerite se da je obradak sigurno clamped. Keep hands away from the cutting area. Wait for the blade to stop completely before setting the tool down.
Proizvod gotovview
Familiarize yourself with the components of your AEG PST 500 X Jigsaw.
Slika 1: Prednja strana view of the AEG PST 500 X Jigsaw, highlighting the motor housing and blade area.
Slika 2: Bočna strana view of the AEG PST 500 X Jigsaw, showing the handle and power cord connection.
Ključne karakteristike:
- Powerful 440 Watt Motor: Pruža ampmala snaga za razne zadatke rezanja.
- Fixtec Blade Change System: Allows for quick and tool-free blade replacement.
- Adjustable Base Plate: Enables horizontal adjustments for bevel cuts up to 45 degrees.
- Dva-Stage Djelovanje njihala: Selectable pendulum stroke for optimized cutting performance and cleaner results across different materials.
- Priključak za usisavanje prašine: For connecting a dust extraction system to keep the work area clean.
Postavljanje
1. Ugradnja lista pile
- Provjerite je li ubodna pila isključena iz napajanja.
- Locate the Fixtec blade clamp mehanizam.
- Gurnite oštricu clamp lever or button (refer to specific tool design) to open the clamp.
- Insert the saw blade into the blade holder with the teeth facing forward. Ensure the blade is fully seated.
- Otpustite oštricu clamp lever/button to secure the blade. Gently pull on the blade to confirm it is firmly locked in place.
2. Podešavanje osnovne ploče za koso rezanje
- Isključite alat iz napajanja.
- Loosen the screws or lever that secure the base plate.
- Tilt the base plate to the desired angle for bevel cuts (up to 45 degrees). Use the angle scale for precision.
- Tighten the screws or lever firmly to secure the base plate in position.
- Always perform a test cut on scrap material to verify the angle before cutting your main workpiece.
3. Spajanje na napajanje
- Ensure the power switch is in the "OFF" position before plugging in the tool.
- Connect the power cord to a suitable 220 Volt AC power outlet.
Upute za rad
1. Uključivanje/isključivanje
- To start the jigsaw, press the power switch.
- To stop the jigsaw, release the power switch. Note: Some models may have a lock-on button for continuous operation, which must be disengaged to turn off the tool.
2. Selecting Pendulum Action
Dvojicatage pendulum action allows for faster cutting in softer materials and cleaner cuts in harder materials.
- Higher Pendulum Setting: For faster, more aggressive cuts in wood and softer materials. This setting may result in a rougher cut edge.
- Lower/No Pendulum Setting: For finer, cleaner cuts in wood, plastics, and metals. This setting is slower but provides better control and finish.
- Adjust the pendulum setting using the dedicated lever or dial on the tool.
3. Tehnike rezanja
Uvijek provjerite je li radni komad sigurno pričvršćenamped za sprječavanje pomicanja tijekom rezanja.
Figure 3: User demonstrating cutting a wooden board with the AEG PST 500 X Jigsaw.
Figure 4: Close-up of the AEG PST 500 X Jigsaw in action, performing a cut on wood.
- Početak rezanja: Place the front edge of the base plate flat on the workpiece. Start the tool and allow the blade to reach full speed before slowly guiding it into the material along your marked line.
- Ravni rezovi: Maintain steady pressure and guide the tool smoothly along the cutting line. For long straight cuts, consider using a straight edge guide (not included).
- Krivuljasti rezovi: Za uže krivulje koristite užu oštricu. Polako vodite alat, dopuštajući oštrici da prati krivulju bez forsiranja.
- Kosi rezovi: After adjusting the base plate angle (as described in Setup), proceed with cutting as usual, ensuring the base plate remains flat on the workpiece.
- Ubodni rezovi: For internal cuts without a pilot hole, tilt the tool forward so the front edge of the base plate rests on the workpiece. Start the tool, then slowly lower the rear of the base plate until the blade plunges through the material.
Održavanje
Regular maintenance ensures the longevity and optimal performance of your jigsaw. Always disconnect the tool from the power supply before performing any maintenance.
- Čišćenje: Regularly clean the ventilation openings and the blade area to prevent dust buildup. Use a soft brush or compressed air. Do not use water or solvents.
- Zamjena oštrice: Replace dull or damaged blades promptly. Refer to the "Installing the Saw Blade" section for proper procedure.
- Kabel za napajanje: Inspect the power cord for any damage before each use. If damaged, have it repaired by a qualified service technician.
- Skladištenje: Ubodnu pilu čuvajte na suhom, sigurnom mjestu, izvan dohvata djece.
Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Alat se ne pokreće. | Nema napajanja; neispravan kabel za napajanje; neispravan prekidač. | Provjerite utičnicu i kabel. Ako problem i dalje postoji, obratite se servisu. |
| Oštrica ne reže učinkovito ili se zaglavljuje. | Dull or incorrect blade; excessive feed pressure; incorrect pendulum setting. | Replace blade. Reduce feed pressure. Adjust pendulum setting. |
| Pretjerane vibracije. | Labava oštrica; oštećena oštrica; istrošene unutarnje komponente. | Ensure blade is securely installed. Replace blade. If problem persists, contact service. |
| Netočni rezovi. | Loose base plate; incorrect blade; workpiece not secured. | Tighten base plate. Use appropriate blade. Secure workpiece firmly. |
Tehnički podaci
| Značajka | Detalj |
|---|---|
| Marka | AEG |
| Broj modela | 4935428260 (PST 500 X) |
| Izvor napajanja | Električni na kabel |
| Wattage | 440 vata |
| Voltage | 220 volti |
| Ubrzati | 3700 okretaja u minuti |
| Duljina hoda | 15 mm |
| Materijal oštrice | Aluminum, Metal, Steel |
| Preporučena površina | Drvo |
| Kut rezanja | Do 45 stupnjeva |
| Dimenzije proizvoda (D x Š x V) | 29D x 19Š x 9V centimetara |
| Težina artikla | 2.88 kilogram |
| Posebne značajke | Saw blade included, Dust extraction connection |
| Certifikati | CE |
Note: The specification for "Included components: Battery" in the source data appears to be an error, as this is a corded electric tool and operates via an electrical cable.
Jamstvo i podrška
Informacije o jamstvu
The AEG PST 500 X Jigsaw comes with a Ograničeno jamstvo. Please refer to the warranty card included with your product for specific terms and conditions, including coverage duration and limitations.
Dostupnost rezervnih dijelova
Spare parts for this product are available in the EU for a period of 5 godine od datuma kupnje.
Korisnička podrška
For technical assistance, service, or warranty claims, please contact AEG customer support. Contact information can typically be found on the AEG official website or on the product packaging. When contacting support, please have your model number (PST 500 X or 4935428260) and purchase date available.