Pro-Ject Audio - Phono Box DC

Uvod

This manual provides essential information for the proper setup, operation, and maintenance of your Pro-Ject Audio Phono Box DC. This compact phono preamplifier is designed to enhance the audio signal from your turntable, making it compatible with line-level inputs on your amplifier or receiver. It supports both Moving Magnet (MM) and Moving Coil (MC) cartridges, offering versatility for various turntable setups.

Slika 1: Prednja strana view of the Pro-Ject Audio Phono Box DC in black.

Sigurnosne informacije

• Uvijek isključite adapter za napajanje prije čišćenja ili ako uređaj nećete koristiti dulje vrijeme.
• Do not expose the unit to rain or moisture. Avoid placing objects filled with liquid, such as vases, on the unit.
• Osigurajte pravilnu ventilaciju. Ne blokirajte ventilacijske otvore.
• Place the unit on a stable, level surface to prevent accidental falls.
• Izbjegavajte postavljanje uređaja u blizinu izvora topline poput radijatora, grijalica, peći ili drugih uređaja (uključujući amplifiers) koji proizvode toplinu.
• Koristite samo napajanje koje je osigurao proizvođač.
• Ne pokušavajte sami servisirati uređaj. Za sve servisne radove obratite se kvalificiranom servisnom osoblju.

Sadržaj paketa

Molimo provjerite sadrži li vaš paket sljedeće stavke:

• Pro-Ject Audio Phono Box DC unit
• DC power adapter (18V)
• Priručnik s uputama

Ako bilo koji predmet nedostaje ili je oštećen, odmah se obratite prodavaču.

Postavljanje

Follow these steps to correctly set up your Phono Box DC:

1. Plasman: Position the Phono Box DC near your turntable and amplifier. Its compact size allows for flexible placement.
2. Cartridge Type Selection: Locate the MM/MC switch on the rear panel of the Phono Box DC. Set it according to your turntable's cartridge type (Moving Magnet or Moving Coil). Ensure this is set correctly for optimal sound quality.
3. Connect Turntable to Input: Connect the RCA output cables from your turntable to the "In" (Left and Right) RCA inputs on the rear of the Phono Box DC.
4. Spojite žicu za uzemljenje: Connect the ground wire from your turntable to the ground terminal on the Phono Box DC. This is crucial for minimizing hum and noise.
5. Connect Output to Ampdizalica: Connect the "Out" (Left and Right) RCA outputs from the Phono Box DC to a line-level input on your amplifier or receiver (e.g., "Aux", "CD", "Line In"). Do NOT connect it to an amplifier's dedicated "Phono" input, as this would result in over-amplifikacija i distorzija.
6. Priključite napajanje: Connect the supplied 18V DC power adapter to the "Power 18V===" input on the rear of the Phono Box DC, then plug the adapter into a suitable power outlet.

Slika 2: Stražnji dio view showing input, output, MM/MC switch, ground terminal, and power input.

Operativni

Once all connections are made and the power is supplied, the Phono Box DC is ready for operation. There are no additional controls on the unit beyond the MM/MC switch. Simply select the correct cartridge type, and the unit will automatically process the audio signal from your turntable.

• Osigurajte svoje amplifier is set to the correct input channel where the Phono Box DC is connected.
• Podesite glasnoću pomoću ampkontrole spašivača.

Održavanje

The Pro-Ject Audio Phono Box DC requires minimal maintenance:

• Čišćenje: Za čišćenje vanjske strane uređaja koristite meku, suhu krpu. Nemojte koristiti tekuća sredstva za čišćenje ili otapala.
• Prah: Keep the unit free from dust accumulation, which can affect performance and lifespan.
• Veze: Povremeno provjeravajte sve kabelske spojeve kako biste bili sigurni da su sigurni i bez korozije.

Rješavanje problema

If you encounter issues with your Phono Box DC, refer to the following common problems and solutions:

Tehnički podaci

Informacije o jamstvu

Pro-Ject Audio Systems products are covered by a manufacturer's warranty. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For detailed warranty information, it is recommended to visit the official Pro-Ject Audio Systems webstranicu ili se obratite ovlaštenom prodavaču.

podrška

Should you require further assistance or have questions not covered in this manual, please contact:

• Your authorized Pro-Ject Audio Systems retailer.
• Pro-Ject Audio Systems customer support via their official webstranica: www.project-audio.com

Prilikom kontaktiranja podrške, pripremite broj modela proizvoda (13072) i podatke o kupnji.