RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Proizvod je gotovview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Ključne karakteristike:

• Vlast: LED od 39 W
• Temperatura boje: 5100K Hladna bijela
• Životni vijek: 100,000 hours based on LM-80 tests
• LED: Three multi-chip 13-watt high-performance LEDs
• Optika: NEMA type 7H x 6V with Air-flow technology heatsink
• Reflektor: Semi-specular anodized aluminum
• Brtve: Visokotemperaturni silikon
• Završiti: Bronze chip and fade-resistant polyester powder coat
• Voltage: 120-volt to 277-volt operation

2. Sigurnosne informacije

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Električna sigurnost: Instalaciju mora izvršiti kvalificirani električar u skladu sa svim nacionalnim i lokalnim električnim propisima. Prije instalacije ili servisiranja provjerite je li napajanje isključeno na prekidaču.
• Uzemljenje: The fixture must be properly grounded to prevent potential electric shock.
• Montaža: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Radna temperatura: Ne koristite uređaj izvan njegovog navedenog temperaturnog raspona.
• LED: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Instalacija

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Potrebni alati:

• Odvijač (križni i s ravnom glavom)
• Žica striptizete
• Kliješta
• Drill (if mounting surface requires pilot holes)
• Podesivi ključ

Mogućnosti montaže:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Slika 2: Nprample of a Slipfitter Mount (optional accessory)

Koraci instalacije:

1. Odspojite napajanje: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage tester.
2. Pripremite površinu za ugradnju: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Žičani spojevi:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Učvršćenje za montažu: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Podesite cilj: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Vrati snagu: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Operacija

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Standardni rad:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Slika 3: Nprample of a Photocell (optional accessory)

5. Održavanje

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Čišćenje:

• Vanjski: Povremeno čistite vanjštinu uređaja mekom,amp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents.
• Objektiv: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Inspekcija:

• Periodically inspect the fixture for any signs of damage, loose connections, or wear.
• Ensure all mounting hardware remains tight and secure.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Rješavanje problema

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Specifikacije

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Jamstvo i podrška

Jamstvo proizvođača:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a 1-godišnje jamstvo proizvođača od datuma kupnje. Ovo jamstvo pokriva nedostatke u materijalu i izradi pri normalnoj uporabi i servisiranju.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Korisnička podrška:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webstranicu za trenutne kontaktne podatke.