Uvod
Thank you for choosing the BOWER Pro Heavy Duty 72-Inch Camera Tripod. This manual provides essential information for the safe and effective use of your tripod. Please read it thoroughly before operation and retain it for future reference.
Image: The BOWER Pro Heavy Duty 72-Inch Camera Tripod, fully extended, showcasing njegov robusni dizajn.
Sigurnosne informacije
- Ensure all leg locks and head adjustments are securely tightened before mounting equipment.
- Do not exceed the maximum load capacity of the tripod.
- Always keep a hand on your camera when adjusting the tripod height or angle.
- Izbjegavajte postavljanje tronošca na nestabilne ili skliske površine.
- Ne ostavljajte tronožac bez nadzora s teškom opremom, posebno u vjetrovitim uvjetima.
Sadržaj paketa
- BOWER Pro Heavy Duty 72-Inch Camera Tripod (Model VT6800)
- Waterproof Carry Case
- Upute za uporabu (ovaj dokument)
Proizvod gotovview
Familiarize yourself with the main components of your tripod:
Slika: Detaljna view of the tripod highlighting key features such as the 90° tilt, 360° swivel, quick release, bubble level, all-weather foam grip, and adjustable hook for accessories.
- 3-Way Fluid Pan-Head: Allows for smooth horizontal (pan) and vertical (tilt) adjustments.
- Montaža za brzo otpuštanje: Za brzo pričvršćivanje i odvajanje fotoaparata.
- Razina mjehurića: Helps ensure the tripod is perfectly level.
- Ručka za tavu: Controls the pan and tilt movements of the head.
- Geared Center Column with Crank: For precise vertical height adjustment of the camera.
- Leg Locks: Securely lock each leg section at the desired height.
- Radial Leg Braces: Provide additional stability to the tripod legs.
- Gumene noge: Non-slip feet for secure placement on various surfaces.
- Sure-Grip Foam Handles: For comfortable handling and transport.
Postavljanje
1. Rasklapanje tronošca
- Postavite tronožac na ravnu, stabilnu površinu.
- Otpustite brave za noge na svakoj nozi.
- Extend the legs outwards until the radial leg braces are fully spread.
- Ensure the legs are evenly spaced for maximum stability.
2. Adjusting Leg Height
- Open the quick side level leg locks on each leg section.
- Extend each leg section to the desired height. The tripod can extend from 24 inches to 72 inches.
- Securely close all leg locks to prevent slippage.
Image: The tripod demonstrating its adjustable height range, collapsing to 24 inches and extending up to 72 inches.
3. Pričvršćivanje kamere
- Locate the quick release plate on the pan-head.
- Press the quick release lever to detach the plate.
- Screw the quick release plate onto the tripod mount of your camera. Ensure it is tightened securely.
- Slide the camera with the attached quick release plate back into the pan-head until it clicks into place. Verify it is locked.
4. Niveliranje tronošca
- Use the integrated bubble level on the pan-head to ensure the tripod is perfectly horizontal.
- Adjust the leg lengths as needed until the bubble is centered.
Operativni
1. Podešavanje pomicanja i nagiba
- Loosen the pan handle to allow for horizontal (pan) and vertical (tilt) movement.
- Use the pan handle to smoothly adjust your camera's angle.
- Tighten the pan handle to lock the camera in position.
Image: The tripod head illustrating its 360-degree swivel capability for versatile shooting angles.
2. Adjusting Center Column Height
- Turn the crank on the geared center column to raise or lower the camera for fine height adjustments.
- Ensure the center column lock is tightened after adjusting to prevent movement.
Održavanje
- Čišćenje: Obrišite tronožac mekom krpomamp krpom nakon upotrebe. Izbjegavajte jake kemikalije.
- Skladištenje: Collapse the tripod to its minimum height (24 inches) and store it in the provided waterproof carry case in a dry, cool place.
- Podmazivanje: Do not apply lubricants to the leg locks or pan-head mechanisms unless specifically instructed by the manufacturer.
Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Tronožac je nestabilan. | Leg locks not fully tightened; uneven surface; legs not fully spread. | Ensure all leg locks are secure. Adjust leg lengths for an even stance. Spread legs fully and use radial leg braces. |
| Camera wobbles on the head. | Quick release plate not securely attached to camera or head. | Tighten the quick release plate screw on the camera. Ensure the plate is fully seated and locked into the pan-head. |
| Pan or tilt movement is stiff. | Pan handle lock is too tight. | Loosen the pan handle slightly to allow for smoother movement. |
| Center column does not move smoothly. | Center column lock is engaged; dirt or debris. | Ensure the center column lock is disengaged. Clean the column if visible debris is present. |
Tehnički podaci
| Značajka | Detalj |
|---|---|
| Broj modela | VT6800 |
| Maksimalna visina | 72 inča (182.88 cm) |
| Minimalna visina | 24 inča (60.96 cm) |
| Sklopljena veličina | 24 inča (60.96 cm) |
| Vrsta glave | 3-Way Fluid Pan Head |
| Presjeci nogu | 4 |
| Materijal | Metal (legs), Rubber (feet, grip) |
| Kompatibilni uređaji | Camcorder, Camera, Smartphone, Tablet (with appropriate adapter, not included) |
| Posebne značajke | Rotatable, Adjustable, Quick Release Mount, Bubble Level, Geared Center Column |
Informacije o jamstvu
The BOWER Pro Heavy Duty 72-Inch Camera Tripod (Model VT6800) comes with a Jamstvo 3 godine from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Korisnička podrška
For technical assistance, warranty claims, or any questions regarding your BOWER Pro Heavy Duty 72-Inch Camera Tripod, please visit the official Bower website or contact our customer support team:
- Bower Official Webstranica: Visit the Bower Store on Amazon
- Refer to the product packaging for direct contact information or support channels.
