Hiland HIL-FP-1201

Hiland HIL-FP-1201 Propane Fire Pit

Priručnik s uputama

Uvod

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Hiland HIL-FP-1201 Propane Fire Pit. Please read all instructions carefully before use to ensure proper function and safety.

Hiland HIL-FP-1201 Propane Fire Pit with decorative bronze finish

Image 1: The Hiland HIL-FP-1201 Propane Fire Pit, showcasing its round design and hammered bronze finish.

Važne sigurnosne informacije

  • Keep the fire pit clear of combustible materials.
  • Use only approved fuel types (Liquefied Petroleum Gas).
  • Osigurajte odgovarajuću ventilaciju tijekom rada.
  • Follow all safety instructions for relocation and storage.
  • Check local regulations regarding outdoor fire pit usage before operating this product.

Postavljanje i montaža

Unpack all components and verify against the parts list (not provided in this manual, refer to packaging). Assembly typically involves attaching legs, side panels, and connecting the burner assembly. It is recommended to have two people for assembly due to the size and weight of the unit.

  1. Carefully place the main tabletop upside down on a soft, non-abrasive surface to prevent scratches.
  2. Attach the leg supports and side panels according to the manufacturer's instructions. Ensure all bolts are securely tightened.
  3. Carefully turn the fire pit upright.
  4. Place the stainless steel burner into the designated opening in the tabletop.
  5. Distribute the provided glass fire beads evenly over the burner area. Do not obstruct the igniter or thermocouple.
  6. Connect the propane hose from the burner to a standard 20lb propane tank. Ensure all connections are tight and check for leaks using a soapy water solution before first use.
  7. Place the propane tank inside the designated compartment within the fire pit base.
Hiland HIL-FP-1201 Fire Pit with cover removed, showing clear glass fire beads and burner

Slika 2: View of the fire pit with the center cover removed, revealing the clear glass fire beads and the burner assembly.

Upute za rad

Always ensure the area around the fire pit is clear of obstructions and flammable materials before ignition.

  1. Prije prve uporabe: Perform a leak test on all gas connections. Apply a soapy water solution to connections; bubbles indicate a leak. Tighten connections or replace parts as necessary. Do not operate if a leak is detected.
  2. Zapaliti:
    • Open the valve on your propane tank.
    • Locate the control knob on the fire pit.
    • Push the control knob in and turn it counter-clockwise to the 'IGNITE' position. You should hear a clicking sound from the igniter.
    • Hold the knob in for 10-15 seconds after ignition to allow the thermocouple to heat up and engage the safety valve.
    • If the flame does not ignite, release the knob, wait 5 minutes for gas to dissipate, and repeat the ignition process.
  3. Podešavanje plamena: Once ignited, rotate the control knob to adjust the flame height to your desired level.
  4. Za isključivanje:
    • Turn the control knob clockwise to the 'OFF' position.
    • Zatvorite ventil na spremniku propana.
    • Pustite da se ognjište potpuno ohladi prije nego što ga pokrijete ili premjestite.
Hiland HIL-FP-1201 Fire Pit in use on a patio, with flames visible and surrounded by seating

Image 3: The Hiland fire pit operating with visible flames, providing warmth and ambiance.

Održavanje

Regular maintenance ensures the longevity and safe operation of your fire pit.

  • Čišćenje: After the unit has cooled, wipe exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents. Clean glass fire beads periodically by rinsing with water and allowing them to dry completely before placing back in the fire pit.
  • Inspekcija plamenika: Annually inspect the burner and gas connections for signs of wear, damage, or blockages. Clear any debris from the burner ports.
  • Skladištenje: When not in use for extended periods, disconnect the propane tank and store it in a well-ventilated area outdoors. Cover the fire pit with a weather-resistant cover to protect it from the elements.
Close-up of clear glass fire beads for the Hiland fire pit

Image 4: Clear glass fire beads, a key component for the fire pit's aesthetic and heat distribution.

Rješavanje problema

ProblemMogući uzrokOtopina
Fire pit will not igniteNo gas flow; Igniter not sparking; Air in gas line; Thermocouple issueCheck propane tank valve; Ensure igniter electrode is clean and properly positioned; Purge air by attempting ignition several times; Contact customer support if thermocouple is suspected.
Plamen se gasi nakon paljenjaThermocouple not heating sufficiently; Low gas pressureHold control knob in longer after ignition; Ensure propane tank is not low; Check for kinks in gas hose.
Low flame heightLow gas pressure; Partially closed tank valve; Blocked burner portsCheck propane tank level; Fully open tank valve; Clean burner ports.

Tehnički podaci

ZnačajkaDetalj
Broj modelaHIL-FP-1201
MarkaHiland
MaterijalAluminij
Dimenzije proizvoda48"D x 48"Š x 24"V
StilKrug
Vrsta završetkaPremazano prahom
Težina artikla89 funti
Vrsta gorivaUkapljeni naftni plin
BTU izlaz42,000 XNUMX BTU
UPC872313152789

Jamstvo i podrška

For warranty information or technical support, please refer to the documentation included with your purchase or contact Hiland customer service directly. Keep your purchase receipt for warranty claims.

Manufacturer: AZ Patio Heaters LLC

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.