DIG ECO1ASV.075 Upute za uporabu kontrolera za navodnjavanje s ambijentalnim svjetlom

Uvod

The DIG ECO1ASV.075 is an innovative single-station irrigation controller designed for efficient water management. This unit is powered entirely by ambient light (solar energy), eliminating the need for batteries or external AC power. It comes pre-mounted on a 3/4-inch anti-siphon valve, making it suitable for both drip irrigation and sprinkler systems. The integrated anti-siphon valve includes flow control and internal/external bleed features, crucial for protecting your household water supply from contamination. Its patented photovoltaic module and microelectronic energy management system ensure reliable operation in various light conditions, providing continuous power to the controller.

Ključne značajke

• Ambient Light Powered: Operates solely on solar energy, requiring no backup batteries or AC power.
• Svestrana primjena: Compatible with both drip irrigation and sprinkler systems.
• Integrated Anti-Siphon Valve: Features a 3/4-inch anti-siphon valve with flow control for water supply protection.
• Sučelje prilagođeno korisniku: Equipped with seven buttons and an integrated LCD for easy programming.
• Fleksibilno programiranje: Allows for programmable run times from 1 minute up to 5 hours and 59 minutes.
• Održivost okoliša: Utilizes clean, renewable solar energy for eco-friendly operation.

Komponente proizvoda

The DIG ECO1ASV.075 controller and valve assembly consists of the following main parts:

• Kontrolna jedinica: The top grey housing containing the solar panel, LCD screen, and control buttons.
• Anti-Siphon Valve: The black valve body with 3/4-inch inlet and outlet connections, designed to prevent backflow.
• Gumb za kontrolu protoka: Located on the valve, used to adjust water flow.
• Solenoid: The component that opens and closes the valve, connected to the controller.

Slika 1: Gotovoview of the DIG ECO1ASV.075 Ambient Light Powered Controller with 3/4" Anti-Siphon Valve. This image displays the complete unit, showing the grey controller unit mounted atop the black anti-siphon valve. The solar panel is visible on the controller's top surface.

Image 2: Close-up of the DIG ECO1ASV.075 Controller's user interface. The protective cover is open, revealing the LCD screen and the seven control buttons. A small diagram on the inside of the cover provides quick reference for button functions.

Postavljanje i instalacija

Proper installation is crucial for the optimal performance and longevity of your ECO1ASV.075 controller. Ensure all connections are secure and watertight.

1. Pripremite mjesto: Choose a location that receives adequate ambient light throughout the day for the solar panel. The valve should be installed above the highest sprinkler head or emitter in the zone to ensure proper anti-siphon function.
2. Priključak na dovod vode:
   • Identify the inlet (upstream) and outlet (downstream) ports on the anti-siphon valve. Arrows on the valve body typically indicate flow direction.
   • Connect the inlet side of the valve to your main water supply line (e.g., garden hose, PVC pipe).
   • Connect the outlet side of the valve to your irrigation system (drip line or sprinkler manifold).
   • Use appropriate thread sealant (e.g., PTFE tape) on all threaded connections to prevent leaks.
3. Osigurajte jedinicu: While the valve provides a stable base, ensure the entire assembly is securely positioned to prevent accidental damage or dislodgement.
4. Početna naplata: Allow the unit to sit in ambient light for at least 2-3 hours before initial programming to ensure the internal energy management system is sufficiently charged.
5. Test na curenje: Slowly turn on the main water supply and check all connections for leaks. Tighten as necessary.

Upute za rad

The ECO1ASV.075 controller features a simple interface for programming your irrigation schedule.

Sučelje upravljača

The controller has an LCD screen and seven buttons:

• LCD zaslon: Shows current time, program settings, and status.
• Gumbi: Used for navigation, setting values, and manual operation. Refer to Image 2 for button layout.

Programming Your Schedule

Follow these steps to set up your watering program:

1. Activate Screen: Touch any button to activate the LCD screen if it is off.
2. Postavi trenutno vrijeme: Navigate to the time setting mode (consult the quick guide on the controller's cover or full manual for specific button presses) and set the current time.
3. Set Watering Start Time: Choose the desired time for your irrigation cycle to begin.
4. Set Run Time: Program the duration of each watering cycle. The controller allows run times from 1 minute up to 5 hours and 59 minutes, adjustable in 1-minute increments.
5. Postavite učestalost zalijevanja: Select how often the irrigation cycle should repeat (e.g., daily, every other day, specific days of the week).
6. Spremi postavke: Ensure all settings are saved before exiting the programming mode.

Ručni rad

To manually turn the water on or off, or to initiate a manual watering cycle:

• Locate the manual operation button (often indicated by a water drop or 'ON/OFF' symbol).
• Press the button to cycle through manual options (e.g., manual ON, manual OFF, manual cycle).
• Confirm your selection. The valve will open or close accordingly.

Održavanje

Regular maintenance ensures the longevity and efficient operation of your DIG ECO1ASV.075 controller.

• Čišćenje solarnih panela: Periodically wipe the solar panel on top of the controller with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum light absorption and power generation.
• Pregled ventila: Annually inspect the anti-siphon valve for any signs of wear, cracks, or leaks.
• Priprema za zimu (ako je primjenjivo): In regions with freezing temperatures, disconnect the unit from the water supply and drain all water from the valve and irrigation lines to prevent freeze damage. Store the controller in a protected, non-freezing environment.
• Uklanjanje krhotina: Ensure no debris obstructs the valve's internal components or the anti-siphon mechanism.

Rješavanje problema

If you encounter issues with your ECO1ASV.075 controller, refer to the following common problems and solutions:

Tehnički podaci

Jamstvo i podrška

DIG products are manufactured to high quality standards. For specific warranty information and terms, please refer to the documentation included with your purchase or visit the official DIG website. For technical support, troubleshooting assistance beyond this manual, or replacement parts, please contact DIG customer service.

Please note: This manual provides general guidance. Always refer to the latest information and specific instructions provided by the manufacturer.