Wheelock WHST-H15

Wheelock WHST-H15 Paging Horn Instruction Manual

Model: WHST-H15

1. Uvod

This instruction manual provides essential information for the proper installation, operation, and maintenance of the Wheelock WHST-H15 Paging Horn. Please read this manual thoroughly before attempting to install or operate the device to ensure safe and efficient performance. Retain this manual for future reference.

2. Sigurnosne informacije

UPOZORENJE:

  • Instalaciju i ožičenje mora izvršiti kvalificirano osoblje u skladu sa svim lokalnim i nacionalnim električnim propisima.
  • Disconnect power before installing or servicing the device to prevent electric shock.
  • Ensure the mounting surface can adequately support the weight of the paging horn.
  • Do not expose the device to excessive moisture or extreme temperatures beyond its specified operating range.
  • Koristite samo navedeni volumentage inputs (25V, 70V, 100V) to avoid damage to the unit.

3. Sadržaj paketa

Prilikom raspakiranja provjerite jesu li sve komponente prisutne i neoštećene:

  • Wheelock WHST-H15 Paging Horn (1 unit)
  • Adjustable Mounting Bracket (pre-attached or separate)
  • Installation Hardware (screws, washers, nuts - quantity may vary)
  • Ovaj priručnik s uputama

4. Postavljanje i instalacija

The Wheelock WHST-H15 Paging Horn is designed for versatile installation with its adjustable, weatherproof mounting. It supports 25V, 70V, and 100V audio systems.

Wheelock WHST-H15 Paging Horn with adjustable mounting bracket

Figure 1: Wheelock WHST-H15 Paging Horn. This image displays the Wheelock WHST-H15 Paging Horn, featuring its conical speaker and an adjustable mounting bracket at the base. The horn is designed for clear audio projection in various environments.

4.1 Mounting the Paging Horn

  1. Odaberite lokaciju: Choose a suitable mounting location that provides optimal sound coverage and is structurally sound. Consider the weatherproof design for outdoor applications.
  2. Sigurnosni nosač: If the mounting bracket is separate, attach it securely to the chosen surface using appropriate hardware. Ensure it is level and stable.
  3. Attach Horn: Mount the paging horn to the bracket. Use the adjustable mechanism to orient the horn for desired sound direction. Tighten all fasteners to prevent movement.

4.2 Spajanje ožičenja

The WHST-H15 supports 25V, 70V, and 100V constant voltage audio systems. It also features a 15W power rating.

  1. Odabir snage: Pronađite svtage selector switch or terminals on the horn. Set it to match your audio system's output voltage (25V, 70V, or 100V). Incorrect voltagTakav odabir može oštetiti uređaj.
  2. Connect Audio Lines: Connect the audio input lines from your amplifier or paging system to the designated terminals on the horn. Observe correct polarity (+/-).
  3. Sigurne veze: Ensure all wiring connections are tight and properly insulated to prevent short circuits and ensure reliable operation.

5. Upute za rad

Once installed and wired correctly, the Wheelock WHST-H15 Paging Horn operates in conjunction with your connected audio system.

  1. Uključivanje: Apply power to your audio amplifier or paging system.
  2. Testiraj zvuk: Initiate a test page or audio signal through your system.
  3. Adjust Volume/Direction: If necessary, adjust the output volume from your amplifier. The horn's direction can be fine-tuned using its adjustable mounting bracket.

Note: The WHST-H15 is a passive device and does not have its own volume control. Volume adjustments are made at the audio source.

6. Održavanje

The Wheelock WHST-H15 Paging Horn requires minimal maintenance to ensure long-term performance.

  • Redoviti pregled: Periodically inspect the horn and its mounting bracket for any signs of damage, corrosion, or loose connections.
  • Čišćenje: Clean the exterior of the horn with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no moisture enters the internal components.
  • Zaštita okoliša: While weatherproof, extreme environmental conditions may necessitate more frequent checks.

7. Rješavanje problema

If you encounter issues with your Wheelock WHST-H15 Paging Horn, refer to the following common problems and solutions:

ProblemMogući uzrokOtopina
Nema zvuka
  • Nema snage za amplifter
  • Neispravno ožičenje
  • Netočan svtage odabir
  • Oštećen rog
  • Provjeriti amplifier napajanje
  • Verify all wiring connections and polarity
  • Osigurajte voltage selector matches system voltage
  • Contact Wheelock support if horn is damaged
Distorted or low sound
  • Netočan svtage odabir
  • Amplifier output too low/high
  • Labavi spojevi
  • Provjeri voltage selector setting
  • prilagoditi ampvolumen lifiera
  • Provjerite i osigurajte sve spojeve ožičenja
Horn not securely mounted
  • Labavi hardver za montažu
  • Neispravna instalacija
  • Tighten all screws and bolts on the mounting bracket
  • Re-evaluate mounting location and method

8. Specifikacije

MarkaWheelock
ModelWHST-H15
Nazivna snaga15 vata
Voltage Kompatibilnost25V, 70V, 100V (selectable)
MontažaPodesivi nosač za montažu
EkološkiOtporan na vremenske uvjete
BojaBež
Dimenzije proizvoda (DxŠxV)11 x 11 x 11 inča
Težina artikla0.01 unci
Datum prve dostupnosti21. studenog 2013

9. Jamstvo i podrška

For warranty information and technical support, please refer to the official Wheelock webweb-mjesto ili se izravno obratite njihovoj korisničkoj službi. Sačuvajte račun kao dokaz o kupnji.

Wheelock Customer Support: Visit Eaton's Wheelock Webmjesto

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.