FENGDA AS-189 Airbrush Compressor Instruction Manual

1. Uvod

This manual provides essential information for the safe and efficient operation of your FENGDA AS-189 Airbrush Compressor. The AS-189 is a single-cylinder, oil-free reciprocating compressor designed for airbrushing applications. It features a 3.0-liter air tank, automatic start/stop functionality, and a maximum air pressure of 6 bar. Please read these instructions thoroughly before initial use and retain them for future reference.

2. Sigurnosne upute

Uvijek se pridržavajte sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili oštećenje kompresora:

• Provjerite je li napajanje voltage matches the compressor's requirements (220-240 V/50 Hz).
• Ne koristite kompresor u mokrom ili damp uvjetima.
• Držite djecu i neovlaštene osobe podalje od kompresora u radu.
• Always disconnect the power plug before performing any maintenance or when the compressor is not in use.
• Do not modify the compressor or its components. Use only original replacement parts.
• Osigurajte odgovarajuću ventilaciju tijekom rada kako biste spriječili pregrijavanje.
• Never direct the air stream at people or animals.
• Wear appropriate personal protective equipment, such as eye protection, when operating.

3. Sadržaj paketa

Prilikom raspakiranja provjerite jesu li svi predmeti prisutni i neoštećeni:

• 1x FENGDA AS-189 Airbrush Compressor
• 1x English Instruction Manual
• 1x Air Filter (pre-installed or separate)

4. Proizvod je gotovview

Familiarize yourself with the main components of your AS-189 compressor.

Slika 4.1: Prednja strana view of the FENGDA AS-189 Airbrush Compressor. This image shows the overall compact design, including the motor housing, air tank, pressure regulator, and manometer.

Slika 4.2: Strana view of the FENGDA AS-189 Airbrush Compressor, highlighting the pressure regulator with integrated air filter and moisture trap. The manometer for monitoring air pressure is also visible.

Slika 4.3: Pod kutom view of the FENGDA AS-189 Airbrush Compressor, providing a clearer perspective of the handle for portability and the various connections. The power switch is located on the side of the motor housing.

5. Postavljanje

1. Plasman: Kompresor postavite na stabilnu, ravnu površinu u dobro prozračenom prostoru.
2. Airbrush Connection: Connect your airbrush hose to the 1/8" thread compressor connection on the pressure regulator. Ensure a secure, airtight connection.
3. Priključak za napajanje: Plug the power cord into a grounded electrical outlet (220-240 V/50 Hz). The network cable length is approximately 1.8 meters (6 feet).

6. Upute za rad

The AS-189 compressor features a two-position power switch for different operating modes:

• Switch Position 1 (Auto Start/Stop):

  In this mode, the compressor will automatically start when the air tank pressure drops to 3 bar (43 PSI) and automatically stop when the pressure reaches 4 bar (57 PSI). This mode is ideal for maintaining consistent pressure and reducing noise and wear during intermittent use.
• Switch Position 2 (Maximum Pressure):

  In this mode, the compressor will run continuously until it reaches its maximum pressure of 6 bar (86 PSI). It will then maintain this pressure. This mode is suitable for applications requiring continuous high pressure.

Podešavanje tlaka zraka: Use the pressure regulator knob to adjust the output air pressure to your desired level (0.0 to 6.0 bar). The manometer will display the current output pressure.

7. Održavanje

The FENGDA AS-189 is an oil-free compressor, eliminating the need for oil changes. Regular maintenance is minimal but important for longevity:

• Filtar zraka: Periodically check and clean or replace the air filter element to ensure optimal air quality and compressor performance. A clogged filter can reduce airflow and strain the motor.
• Zamjenjivač vlage: The integrated moisture trap should be drained regularly, especially in humid environments, to prevent water from entering your airbrush.
• Čišćenje: Obrišite vanjski dio kompresora oglasnim materijalomamp tkanina. Ne koristite jake kemikalije ili abrazivna sredstva za čišćenje.
• Skladištenje: When not in use for extended periods, store the compressor in a clean, dry place.

8. Rješavanje problema

If you encounter issues with your compressor, refer to the following common solutions:

• Kompresor se ne pokreće:
  • Provjerite je li kabel za napajanje dobro priključen.
  • Verify the power switch is in position 1 or 2.
  • Provjerite je li električna utičnica funkcionalna.
• Low air pressure or no airflow:
  • Check for leaks in the airbrush hose or connections.
  • Ensure the pressure regulator is set to the desired pressure.
  • Clean or replace the air filter if it is clogged.
  • Check if the airbrush nozzle is clogged.
• Compressor runs continuously in Auto Start/Stop mode:
  • Check for air leaks in the system (hose, airbrush, connections).
  • Ensure the pressure switch is functioning correctly.
• Pretjerana buka ili vibracija:
  • Ensure the compressor is on a stable, level surface.
  • Provjerite ima li labavih komponenti.

Ako problemi potraju, obratite se korisničkoj podršci ili kvalificiranom tehničaru.

9. Specifikacije

10. Jamstvo i podrška

Za informacije o jamstvu ili tehničku podršku, molimo pogledajte dokumentaciju koju ste dobili prilikom kupnje ili se obratite prodavaču. Sačuvajte račun kao dokaz o kupnji.