Frigidaire 316261900

Frigidaire 316261900 Range/Stove/Oven Surface Burner Cap Instruction Manual

Model: 316261900

Uvod

This manual provides essential information for the proper installation, use, and maintenance of your Frigidaire 316261900 Range/Stove/Oven Surface Burner Cap. Please read these instructions carefully before proceeding to ensure safe and efficient operation.

Proizvod gotovview

The Frigidaire 316261900 is a genuine replacement surface burner cap designed for Frigidaire range, stove, and oven cooktops. This component covers the burner head, helping to distribute the flame evenly and protect the burner from spills and debris. It is made of durable cast iron and is black in color.

Frigidaire 316261900 Surface Burner Cap

Image: The Frigidaire 316261900 Surface Burner Cap, a black, circular component.

Sigurnosne informacije

  • Uvijek isključite uređaj iz struje prije bilo kakve instalacije ili održavanja.
  • Allow the cooktop and burner components to cool completely before handling.
  • Nosite odgovarajuću osobnu zaštitnu opremu, poput rukavica, ako je potrebno.
  • Ensure the replacement part is compatible with your appliance model.
  • Ako niste sigurni u vezi bilo kojeg koraka, obratite se kvalificiranom tehničaru.

Postavljanje i instalacija

This section outlines the steps for replacing an existing surface burner cap. Ensure the cooktop is cool and the appliance is disconnected from power before beginning.

  1. Pripremite područje: Clear any cookware or debris from the cooktop surface.
  2. Uklonite stari poklopac (ako je primjenjivo): Carefully lift the old burner cap off the burner head. It should simply rest on top.
  3. Inspect Burner Head: Check the burner head for any food residue or blockages. Clean if necessary, ensuring the igniter is clear.
  4. Place New Cap: Position the new Frigidaire 316261900 burner cap directly over the burner head, ensuring it sits flat and centered. The cap should rest securely without wobbling.
  5. Funkcionalnost testiranja: Reconnect power to the appliance. Turn on the burner to a low setting to verify proper flame distribution and ignition. The flame should be even and blue.
Frigidaire 316261900 Surface Burner Cap with measurements

Image: The Frigidaire 316261900 Surface Burner Cap held in a hand, showing its approximate dimensions (3.0 inches / 7 cm diameter).

Upute za rad

The surface burner cap is an integral part of your cooktop's burner assembly. Once correctly installed, its operation is automatic with the use of the burner.

  • Ensure the burner cap is always in place before operating the burner.
  • The cap helps to direct the flame for efficient cooking and protects the burner head.
  • Do not operate the burner without the cap, as this can lead to improper flame distribution and potential safety hazards.

Održavanje

Regular cleaning of the burner cap helps maintain optimal performance and appearance.

  • Dnevno čišćenje: After the cooktop has cooled, wipe the burner cap with a damp cloth and mild detergent to remove food spills.
  • Duboko čišćenje: For stubborn stains, the burner cap can be removed and soaked in warm, soapy water. Use a non-abrasive brush or sponge to gently scrub away residue.
  • Sušenje: Ensure the burner cap is completely dry before placing it back on the burner head. Moisture can interfere with ignition.
  • Izbjegavajte abrazive: Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish of the cap.

Rješavanje problema

Uobičajeni problemi i rješenja
ProblemMogući uzrokOtopina
Uneven flame or poor ignitionBurner cap not seated correctly, or burner ports/igniter are dirty.Ensure the cap is flat and centered. Clean the burner head and igniter thoroughly.
Cap appears discolored or damagedNormal wear and tear, or exposure to excessive heat/harsh cleaning agents.Clean as per maintenance instructions. If severely damaged, replacement may be necessary.
Cap wobblesImproper seating or damage to the burner head.Reseat the cap. Inspect the burner head for damage.

Tehnički podaci

  • Broj modela: 316261900
  • Marka: Frigidaire
  • Materijal: Lijevano željezo
  • Boja: Crna
  • Težina artikla: Otprilike 4 unci (113 grama)
  • Dimenzije: Approximately 3.0 inches (7 cm) diameter
  • Vrsta dijela: Surface Burner Cap

Jamstvo i podrška

As a genuine Frigidaire replacement part, this burner cap is typically covered under the standard warranty terms for Frigidaire appliance parts. For specific warranty details, please refer to your appliance's original documentation or contact Frigidaire customer support directly.

Za dodatnu pomoć ili kupnju dodatnih originalnih dijelova Frigidaire, posjetite službenu stranicu Frigidaire webstranici ili se obratite njihovom odjelu korisničke službe.

Frigidaireov službenik Webmjesto

© 2024 Frigidaire. Sva prava pridržana. Ovaj priručnik služi samo u informativne svrhe.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.