1. Važne sigurnosne informacije
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or fatal. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- UPOZORENJE: Opasnost od strujnog udara. Isključite napajanje na osiguraču ili strujnom prekidaču prije instaliranja ili servisiranja.
- Svi električni priključci moraju biti u skladu s lokalnim propisima, uredbama ili Nacionalnim električnim kodeksom (NEC).
- Ako niste sigurni u postupke ožičenja, obratite se kvalificiranom električaru.
- This fixture is designed for outdoor, wet location use. Ensure all connections are properly sealed to prevent water intrusion.
- Do not attempt to modify the integrated LED light source. It is not replaceable.
2. Sadržaj paketa
Prije početka instalacije provjerite jesu li sve komponente prisutne:
- 1 x VAXCEL Melbourne Post Light Fixture (with integrated LED)
- 1 x Clear Crackle Glass Shade
- Pribor za montažu (vijci, matice)
3. Specifikacije
| Značajka | Specifikacija |
|---|---|
| Broj modela | T0165 |
| Dimenzije (D x Š x V) | 8 cm x 8 cm x 16 cm |
| Težina | 3.97 funti |
| Materijal | Legirani čelik, staklo |
| Izvor svjetlosti | Integrated LED (6 Watts) |
| Svjetlina | 300 lumena |
| Temperatura boje | 3000 Kelvina (topla bijela) |
| Indeks reprodukcije boja (CRI) | 82 |
| Voltage | 120 volti |
| Posebne značajke | Dusk to Dawn Sensor, Exterior Wet Rated |
| Vrsta montaže | Post Mounted (fits standard 3-inch diameter post, not included) |
4. Upute za instalaciju (Postavljanje)
Before you begin, ensure the power is turned off at the circuit breaker. This fixture is designed to be mounted on a standard 3-inch diameter post (post not included).
- Prepare the Post: Ensure your existing 3-inch diameter post is securely installed and has electrical wiring extending from its top.
- Spojite ožičenje: Carefully connect the fixture's wires to your household electrical wires. Use the provided wire nuts to secure connections:
- Connect the black wire from the fixture to the black (hot) wire from the post.
- Connect the white wire from the fixture to the white (neutral) wire from the post.
- Connect the green or bare copper ground wire from the fixture to the green or bare copper ground wire from the post.
- Montirajte učvršćenje: Carefully place the fixture onto the top of the 3-inch post, aligning any pre-drilled holes if applicable. Secure the fixture to the post using the provided mounting screws. Do not overtighten.
- Ugradnja staklenog sjenila: Gently place the clear crackle glass shade into the fixture, ensuring it is seated properly and securely.
- Vrati snagu: Once the fixture is securely mounted and all connections are made, restore power at the circuit breaker.
5. Upute za rad
The VAXCEL Melbourne Post Light features an integrated dusk-to-dawn photocell sensor for automatic operation. There are no manual controls for this light fixture.
- Automatsko uključivanje/isključivanje: The photocell sensor (refer to Figure 3) detects ambient light levels. The fixture will automatically turn on when it gets dark and turn off when it detects sufficient daylight.
- Početni rad: Upon initial power-up, the light may take a few minutes to calibrate or may turn on briefly before turning off if it is daytime. This is normal operation.
6. Održavanje
Regular maintenance will help preserve the appearance and functionality of your VAXCEL Melbourne Post Light.
- Čišćenje: Za čišćenje uređaja, provjerite je li napajanje isključeno. Obrišite mekom,amp krpom. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala jer mogu oštetiti završnu obradu ili staklo.
- LED izvor svjetla: The LED light source is integrated and designed for long-lasting performance. It is not user-replaceable.
- Fotoćelija: Keep the photocell sensor (Figure 3) free from dirt, debris, or obstructions (e.g., leaves, snow) to ensure proper dusk-to-dawn operation.
7. Rješavanje problema
If your VAXCEL Melbourne Post Light is not functioning as expected, refer to the following common issues and solutions:
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Svjetlo se ne pali noću. | Nema napajanja na uređaju. Fotoćelija je blokirana ili neispravna. Problem s ožičenjem. | Check circuit breaker and wall switch (if applicable). Ensure photocell is clean and not blocked by objects. Verify wiring connections are secure (with power off). |
| Svjetlo ostaje uključeno tijekom dana. | Fotoćelija je blokirana ili neispravna. Nedovoljno ambijentalnog svjetla koje dopire do senzora. | Ensure photocell is clean and not blocked. Relocate the fixture if it's in a shaded area during the day. |
| Svjetlo treperi ili se prigušuje. | Labav spoj ožičenja. Oscilacije snage. | Provjerite sve spojeve ožičenja (s isključenim napajanjem). Ako sumnjate na fluktuacije struje, obratite se električaru. |
If these steps do not resolve the issue, please contact VAXCEL customer support.
8. Informacije o jamstvu
The VAXCEL Melbourne 1L LED Dusk to Dawn Outdoor Post Light (Model T0165) is covered by a 5-godišnje ograničeno jamstvo from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the VAXCEL official webstranicu ili se obratite korisničkoj podršci.
9. Podaci za kontakt
For further assistance, technical support, or warranty claims, please contact VAXCEL customer service:
- Webstranica: Visit the VAXCEL Store on Amazon
- Please have your model number (T0165) and proof of purchase ready when contacting support.