ExpertPower 7.2V 1500mAh NiCd Battery User Manual

Uvod

This manual provides instructions for the safe and effective use of your ExpertPower 7.2V 1500mAh NiCd replacement battery. Please read this manual thoroughly before using the battery to ensure optimal performance and safety.

These batteries are designed as direct replacements for various Makita 7.2V power tools.

Sigurnosne informacije

WARNING: Improper use of batteries can result in fire, explosion, or other hazards.

• Nemojte kratko spajati terminale baterije.
• Ne izlažite bateriju vodi ili vlazi.
• Do not store the battery in direct sunlight or high temperatures.
• Ne spaljujte niti bacajte bateriju u vatru.
• Ne pokušavajte rastaviti ili modificirati bateriju.
• Držite baterije izvan dohvata djece.
• Use only chargers specifically designed for NiCd batteries.
• If the battery leaks, avoid contact with skin and eyes. Rinse immediately with water and seek medical attention.

Značajke proizvoda

• Brand New: Ensures fresh performance.
• Ni-Cd Chemistry: Nickel-Cadmium battery type.
• 7.2 Volts: Standardni svtage for compatible tools.
• 1500 mAh Kapacitet: Pruža ample snaga za produženu upotrebu.
• Ugrađena zaštita strujnog kruga: Prevents overheating, short circuits, and overcharging.
• Visokokvalitetni materijali: Izrađeno za trajnost i pouzdanost.

Kompatibilnost

This ExpertPower battery is a replacement for Makita part numbers: 191679-9, 192532-2, 192695-4, 632002-4, 632003-2, 7000, 7002, 7033.

It is compatible with the following Makita power tool models:

• 3700D, 3700DW
• 4071D, 4073D
• 4307D, 4307DW
• 4770D
• 6002D, 6002DW, 6002DWK
• 6010D, 6010DL, 6010DW, 6010DWK
• 6012D, 6012DL, 6012DW, 6012DWK
• 6015DWE, 6015DWK
• 6016DW
• 6017DWBE, 6017DWE
• 6018D, 6018DWBE, 6018DWE
• 6019D, 6019DW, 6019DWBE, 6019DWE, 6019DWLE
• 6022DW
• 6071DW, 6071DWK
• 6072DL, 6072DW, 6072DWK
• 6073D, 6073DW
• 6075D, 6075DW
• 6172D, 6172DW
• 6710D, 6710DW
• 6912D, 6912DW
• 9035D, 9035DW
• 9200D
• 9500D, 9500DW
• DA3000D, DA3000DW
• DA301D, DA301DW
• DA302D, DA302DW, DA302DWB
• ML700 (Flashlight), ML701, ML702
• UH1070DW, UH3000D, UH3000DW, UH3070DW
• UM1000D, UM1200DW, UM1270DW

Postavljanje i instalacija

1. Početna naplata: For optimal performance, fully charge the battery before its first use. Refer to the "Charging" section for details.
2. Umetanje baterije:
   • Align the battery with the battery slot on your compatible Makita power tool.
   • Umetnite bateriju u alat dok ne klikne sigurno na svoje mjesto. Provjerite je li potpuno sjela i ne klima se.
3. Uklanjanje baterije:
   • Locate the battery release button(s) on your power tool.
   • Pritisnite i držite gumb(e) za otpuštanje dok izvlačite bateriju iz alata.

Image: Two ExpertPower 7.2V NiCd batteries. These batteries are designed for compatibility with various Makita power tools.

Punjenje

Use only a charger specifically designed for 7.2V NiCd batteries. Using an incompatible charger can damage the battery or cause safety hazards.

1. Connect your NiCd battery charger to a power outlet.
2. Insert the ExpertPower battery into the charger, ensuring proper alignment.
3. Observe the charger's indicator lights. A typical NiCd charger will show a red light during charging and a green light when fully charged. Refer to your charger's manual for specific indicator meanings.
4. Allow the battery to charge completely. Overcharging NiCd batteries can reduce their lifespan, though built-in protection helps mitigate this.
5. Nakon što se napuni, izvadite bateriju iz punjača.

Bilješka: NiCd batteries can develop a "memory effect" if repeatedly recharged after only being partially discharged. To minimize this, it is recommended to fully discharge NiCd batteries before recharging them periodically.

Operativni

Once the battery is fully charged and securely installed in your compatible Makita power tool, the tool is ready for operation according to its own user manual. Always follow the safety guidelines provided with your power tool.

• Ensure the battery is clean and free of debris before insertion.
• Ne gurajte bateriju na silu u alat ili punjač.
• Monitor battery performance during use. If the tool's power significantly decreases, it's time to recharge the battery.

Održavanje

• Čišćenje: Keep battery terminals clean and free of dirt or corrosion. Use a dry cloth to wipe them if necessary.
• Skladištenje: Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is advisable to store NiCd batteries in a discharged state.
• Životni ciklus: NiCd batteries have a finite number of charge/discharge cycles. Proper charging and storage can help maximize their lifespan.
• Izbjegavajte duboko pražnjenje: While NiCd batteries benefit from occasional full discharge to combat memory effect, consistently running them completely dead can stress the battery.

Rješavanje problema

Tehnički podaci

• Vrsta baterije: NiCd (Nickel-Cadmium)
• Voltage: 7.2 volti
• Kapacitet: 1500 mAh (miliampere Hour)
• Broj modela: I0IBTPMK7K15C
• Dimenzije proizvoda: 1.94 x 1.11 x 5.3 inča
• Težina artikla: 1.4 pounds (Total weight for 2 batteries)
• Proizvođač: ExpertPower

Odlaganje baterija

NiCd batteries contain cadmium, a toxic heavy metal. Do not dispose of these batteries in household waste. Always dispose of NiCd batteries responsibly at designated recycling centers or according to local regulations. Many retailers that sell rechargeable batteries also offer recycling programs.

Proper disposal helps protect the environment and prevents potential health hazards.

Jamstvo i podrška

For warranty information or technical support regarding your ExpertPower battery, please contact ExpertPower customer service directly. Refer to the packaging or the ExpertPower webstranicu za trenutne kontaktne podatke.

ExpertPower products are tested to match and/or exceed specifications of OEM products and are made with high-quality materials.