Fluke 374 FC 600A AC/DC TRMS bežični cilindaramp Korisnički priručnik za mjerač

1. Uvod

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your Fluke 374 FC 600A AC/DC TRMS Wireless Clamp Meter. The Fluke 374 FC is designed for advanced troubleshooting performance, offering true-RMS measurements for accurate readings on non-linear signals. It features wireless connectivity via Fluke Connect, allowing for remote measurement viewing and data recording.

2. Sigurnosne informacije

Always adhere to safety precautions when using electrical test equipment. Failure to do so may result in injury or damage to the meter or equipment under test.

• Pročitajte sve upute: Before operating the meter, thoroughly read and understand all safety and operating instructions.
• Nazivni voltage i struja: Nemojte nanositi više od nazivnog voltage or current, as marked on the meter, between the terminals or between any terminal and earth ground.
• Osobna zaštitna oprema (PPE): Always wear appropriate PPE, including arc-rated clothing, eye protection, and insulated gloves, when working in hazardous electrical environments.
• Pregledajte prije upotrebe: Before each use, inspect the meter, test leads, and accessories for any damage. Do not use if damaged.
• Prijedlog 65 Upozorenje: Ovaj proizvod vas može izložiti kemikalijama za koje je u državi Kaliforniji poznato da uzrokuju rak i urođene mane ili druge reproduktivne štete. Za više informacija posjetite www.P65Warnings.ca.gov.

3. Proizvod je gotovview

The Fluke 374 FC is a robust clamp meter designed for professional electrical measurements. Its key features include:

• 600 A AC and DC current measurement.
• 2500 A AC current measurement with the optional iFlex flexible current probe.
• True-RMS voltage and current for accurate measurements on non-linear signals.
• Fluke Connect Measurements for wireless connectivity to smartphones.
• Ability to record results directly to your phone and the Cloud.

Slika 1: Prednja strana view of the Fluke 374 FC Clamp Meter, showing the display, rotary dial, clamp jaws, and function buttons.

Slika 2: Kutno view of the Fluke 374 FC Clamp Meter, highlighting its ergonomic design and robust construction.

4. Postavljanje

4.1 Ugradnja baterije

The Fluke 374 FC requires two (2) AA batteries for operation.

1. Provjerite je li mjerač ISKLJUČEN.
2. Pronađite poklopac odjeljka za baterije na stražnjoj strani mjerača.
3. Pomoću odvijača odvrnite vijak(e) koji pričvršćuju poklopac.
4. Remove the cover and insert two AA batteries, observing correct polarity (+/-).
5. Replace the battery compartment cover and tighten the screw(s) securely.

4.2 Početno uključivanje

Turn the rotary dial from the OFF position to any measurement function to power on the meter. The display will illuminate.

4.3 Fluke Connect App Setup

To utilize the wireless capabilities, download the Fluke Connect app on your smartphone or tablet. Follow the in-app instructions to pair your Fluke 374 FC meter.

Figure 3: The Fluke 374 FC Clamp Meter wirelessly connected to a smartphone displaying measurement data via the Fluke Connect app.

5. Upute za rad

5.1 Mjerenje AC/DC struje

1. Turn the rotary dial to the “A” (Amps) position for AC current or “” (DC Amps) for DC current.
2. Otvorite clamp čeljusti pritiskom na okidač.
3. Okružite jedan vodič s clamp čeljusti. Provjerite jesu li čeljusti potpuno zatvorene.
4. Read the current measurement on the display.
5. For DC current measurements, press the “ZERO” button before clamping to eliminate any DC offset.

5.2 svtage Mjerenje

1. Connect the test leads to the appropriate input jacks (COM and VΩ).
2. Turn the rotary dial to the “V” (Volts) position.
3. Spojite mjerne sonde preko strujnog kruga ili komponente koju treba mjeriti.
4. Pročitajte svtage measurement on the display.

5.3 Using the iFlex Flexible Current Probe (Optional)

The iFlex probe allows for current measurements in tight spaces or around large conductors, extending the AC current measurement range up to 2500 A.

1. Plug the iFlex probe into the meter’s dedicated iFlex input jack.
2. Turn the rotary dial to the iFlex position.
3. Wrap the flexible probe around the conductor(s) to be measured. Ensure the probe is securely latched.
4. Read the current measurement on the display.

5.4 Fluke Connect Operation

Once paired, the Fluke Connect app allows you to:

• View live measurements remotely on your smartphone, enhancing safety by allowing you to stand at a safe distance.
• Record measurements directly to your phone and upload them to the Fluke Cloud for analysis and reporting.
• Access historical data and trends.

6. Održavanje

6.1 Čišćenje

Wipe the meter case with a damp krpom i blagim deterdžentom. Nemojte koristiti abrazivna sredstva ili otapala. Prije upotrebe provjerite je li mjerač suh.

6.2 Zamjena baterije

Zamijenite baterije kada se na zaslonu pojavi indikator slabe baterije. Upute za umetanje baterija nalaze se u Odjeljku 4.1.

7. Rješavanje problema

If the meter does not function correctly, consider the following:

• Nema prikaza: Provjerite ugradnju baterija i provjerite da nisu ispražnjene.
• Netočna očitanja: Ensure test leads are properly connected and the correct measurement function is selected. For DC current, ensure the ZERO function has been used.
• Fluke Connect issues: Verify Bluetooth is enabled on your smartphone and the meter, and that the app is up to date.

For persistent issues, contact Fluke customer support.

8. Specifikacije

9. Što je u kutiji

Prilikom raspakiranja provjerite jesu li svi predmeti prisutni:

• Fluke 374 FC Clamp Metar
• TL75 Test Leads
• Baterije (unaprijed instalirane ili odvojene)
• Torba za nošenje

Figure 4: The Fluke 374 FC Clamp Meter, test leads, and carrying case as typically included in the product package.

10. Jamstvo i podrška

Fluke Corporation warrants this product to be free from defects in material and workmanship under normal use and service. The specific warranty period and terms are detailed in the warranty statement provided with your product or available on the official Fluke webmjesto.

For technical support, service, or warranty claims, please contact Fluke customer service through their official website or authorized service centers. Always provide your product model number (374 FC) and serial number when seeking support.