Legrand 067001

Legrand 067001 Céliane VMC Switch Instruction Manual

Model: 067001 | Marka: Legrand

1. Uvod

This instruction manual provides essential information for the safe installation, operation, and maintenance of the Legrand 067001 Céliane VMC Switch. This device is designed for controlling Ventilation Mécanique Contrôlée (VMC) systems, operating at 230V with a 10AX current rating.

2. Sigurnosne informacije

WARNING: Risk of electric shock. Installation and maintenance should only be performed by a qualified electrician in accordance with national and local electrical codes.

  • Always disconnect power at the main circuit breaker before installing or servicing the switch.
  • Provjerite jesu li svi spojevi sigurni i pravilno izolirani.
  • Do not operate the switch with wet hands or in damp uvjetima.
  • Ovaj proizvod je namijenjen samo za unutarnju upotrebu (IP20 zaštita).
  • Nemojte prekoračiti navedeni volumentagnazivne vrijednosti e (230 V) ili struje (10 A).

3. Sadržaj paketa

  • 1 x Legrand 067001 Céliane VMC Switch Module

Note: Faceplate and mounting frame are typically sold separately and are required for complete installation.

4. Postavljanje i instalacija

The Legrand 067001 switch is designed for wall or surface mounting. Proper installation is crucial for safety and functionality.

  1. Prekid napajanja: Before beginning any installation, ensure the main power supply to the circuit is turned off at the circuit breaker. Verify with a voltage tester.
  2. Montaža: Install the switch module into a compatible mounting box or frame (not included). This switch supports wall or surface mounting configurations.
  3. Ožičenje:
    • Identify the Line (L) and Neutral (N) wires from your electrical supply.
    • Connect the electrical wires to the corresponding terminals on the switch module. The connection type is crimping. Ensure a secure and tight connection for each wire.
    • Refer to the wiring diagram provided with your VMC system or consult a qualified electrician for specific connection requirements.
  4. Osigurajte modul: Once wired, secure the switch module within its mounting frame or box.
  5. Instalirajte prednju ploču: Attach the decorative faceplate (not included) over the switch module.
  6. Vrati snagu: Once installation is complete and all components are securely in place, restore power at the main circuit breaker.
Legrand 067001 Céliane VMC Switch module, showing internal components and connection terminals.

Image: Legrand 067001 Céliane VMC Switch module. This image displays the grey plastic housing, the internal mechanism, and the terminals for electrical connections, including 'N' for Neutral and 'L' for Line, indicating its wiring points.

5. Upute za rad

The Legrand 067001 is a push-button type switch with an ON-OFF operating mode, designed for controlling VMC systems. It features a call button with a luminous indicator.

  • Uključivanje/isključivanje: Press the push-button to toggle the connected VMC system between ON and OFF states.
  • Luminous Indicator: The integrated luminous indicator provides visual feedback on the switch's status or can be used as a call button depending on the specific VMC system configuration.

6. Održavanje

The Legrand 067001 VMC Switch requires minimal maintenance.

  • Čišćenje: To clean the switch, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the switch or create an electrical hazard.
  • Inspekcija: Povremeno pregledavajte prekidač na bilo kakve znakove oštećenja, labavih spojeva ili promjene boje. Ako primijetite bilo kakve probleme, isključite napajanje i obratite se kvalificiranom električaru.

7. Rješavanje problema

If the switch or connected VMC system is not functioning correctly, consider the following:

  • Bez napajanja: Check if the circuit breaker for the switch is tripped. Reset if necessary.
  • Prekidač ne reagira: Ensure all wiring connections are secure. Loose connections can prevent proper operation.
  • Luminous Indicator Not Working: Verify the wiring for the indicator light is correctly connected according to your VMC system's specifications.
  • Stalni problemi: If troubleshooting steps do not resolve the issue, disconnect power and contact a qualified electrician for further assistance. Do not attempt repairs yourself.

8. Specifikacije

ZnačajkaSpecifikacija
Broj modela067001
MarkaLegrand
Operativni svtage230 volti
Trenutna ocjena10 A (10AX)
Nazivna snaga1600 vata
Način radaUKLJUČENO, ISKLJUČENO
Tip prekidačaTipkalo
Vrsta kontaktaNormalno zatvoreno
Vrsta konektoraKrimpovanje
MaterijalPlastic (housing), Copper (contact)
Vrsta montažeWall Mount or Surface Mount
IP ocjenaIP20
Težina6 gram
BojaSivo

9. Jamstvo i podrška

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Legrand customer service directly. Warranty terms may vary based on region and retailer.

You can find more information on the official Legrand webstranica: www.legrand.com

© 2023 Legrand. Sva prava pridržana. Informacije se mogu promijeniti bez prethodne najave.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.