1. Uvod
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Fengda FD-186 Professional Airbrush Compressor. Please read this manual thoroughly before using the compressor and retain it for future reference.
The Fengda FD-186 is a compact, oil-free mini compressor designed for precision airbrushing. It features a 3-liter air tank, a pressure regulator with a filter and manometer, and an automatic start/stop function for consistent air pressure. Its quiet operation and portability make it ideal for various applications, including airbrushing, cosmetic studios, nail art, tattooing, and hobby use. This compressor is compatible with airbrushes featuring nozzles from 0.2mm to 1mm.
Slika 1.1: Puna view of the Fengda FD-186 Professional Airbrush Compressor.
2. Sigurnosne upute
UPOZORENJE: Nepoštivanje ovih sigurnosnih uputa može uzrokovati strujni udar, požar ili teške ozljede.
- Električna sigurnost: Ensure the compressor is connected to a properly grounded outlet with the correct voltage (220-240V / 50Hz). Do not operate with damaged cords or plugs. Keep the power cord away from heat, oil, and sharp edges.
- Sigurnost tlaka: Never exceed the maximum operating pressure of 4 bars (57 PSI). Do not tamper with the safety/drain valve. Always release air pressure from the tank before disconnecting hoses or performing maintenance.
- Ventilacija: Operate the compressor in a well-ventilated area to prevent overheating. Do not block air vents.
- Osobna zaštita: Wear appropriate personal protective equipment, such as safety glasses, when operating the airbrush system.
- Djeca i kućni ljubimci: Držite djecu i kućne ljubimce podalje od kompresora tijekom rada.
- Skladištenje: Store the compressor in a dry, clean, and secure location when not in use.
- Namjena: Use the compressor only for its intended purpose of airbrushing and related applications as described in this manual.
3. Proizvod je gotovview i komponente
The Fengda FD-186 compressor is designed for ease of use and reliable performance. Key components include:
- Kompresorska jedinica: The main motor and pump assembly.
- Spremnik zraka (3 litara): Stores compressed air to ensure a consistent, pulse-free airflow.
- Regulator pritiska: Allows adjustment of the output air pressure.
- Manometer (Pressure Gauge): Displays the current air pressure.
- Filtar zraka: Removes moisture and particles from the air, preventing contamination of your work.
- Safety/Drain Valve: Za oslobađanjeasing pressure and draining condensed moisture from the air tank.
- Prekidač za napajanje: To turn the compressor on and off.
- Ručka za nošenje: Za laku prenosivost.
3.1 Ključne značajke
- Powerful and constant working pressure.
- Very quiet operation (47 dB).
- Oil-free design, requiring minimal maintenance.
- Portable due to its low weight.
- Automatic start at 3 BAR (43 PSI) and automatic stop at 4 BAR (57 PSI).
- 3-liter pressure vessel ensures balanced air output.
- Equipped with a safety/drain valve.
- Automatic overheat protection for enhanced safety and durability.
Image 3.1: Close-up of the pressure gauge and regulator with air filter.
Image 3.2: Detail of the power switch.
Image 3.3: Detail of the air tank drain valve.
Slika 3.4: Vrh view of the compressor head.
4. Postavljanje
- Raspakiranje: Carefully remove the compressor from its packaging. Inspect for any signs of damage during transit.
- Plasman: Kompresor postavite na stabilnu, ravnu površinu u dobro prozračenom prostoru. Osigurajte dovoljno prostora oko uređaja za cirkulaciju zraka.
- Connect Airbrush Hose: Connect your airbrush hose to the G 1/8 air connection port on the pressure regulator. Ensure the connection is secure to prevent air leaks.
- Priključite napajanje: Plug the power cable into a grounded 220-240V / 50Hz electrical outlet.
- Početna provjera: Before first use, ensure all connections are tight and the drain valve on the air tank is closed.
5. Upute za rad
- Uključivanje: Flip the power switch to the "ON" position. The compressor will start to fill the air tank.
- Automatski rad: The compressor will automatically stop once the pressure in the 3-liter air tank reaches 4 BAR (57 PSI). It will then automatically restart when the pressure drops to 3 BAR (43 PSI) during use. This ensures a consistent air supply without constant motor operation.
- Podešavanje tlaka: Use the knob on the pressure regulator to adjust the desired working pressure. Turn clockwise to increase pressure and counter-clockwise to decrease it. Monitor the manometer to set the precise pressure required for your airbrushing task.
- Airbrush Use: Once the desired pressure is set, you can begin using your airbrush. The air filter will ensure clean, dry air is delivered to your airbrush.
- Isključivanje: After use, turn off the compressor by flipping the power switch to the "OFF" position.
- Release Residual Pressure: It is recommended to release any residual air pressure from the tank by opening the drain valve or briefly activating your airbrush until the manometer reads zero.
5.1 Videozapis demonstracije proizvoda
Video 5.1: Kratak pregledview and demonstration of the Fengda FD-186 Airbrush Compressor.
Video 5.2: Demonstration of the Wiltec AF186 compressor, which shares similar operational principles with the Fengda FD-186.
6. Održavanje
Redovito održavanje osigurava dugotrajnost i optimalne performanse vašeg kompresora.
- Spremnik za odvod zraka: After each use, or at least daily, open the drain valve at the bottom of the air tank to release any accumulated moisture. This prevents rust and extends the tank's life.
- Čisti filtar zraka: Periodically check the air filter on the pressure regulator. If it appears dirty, clean or replace it according to the manufacturer's recommendations to ensure clean air delivery.
- Generalno čišćenje: Obrišite vanjski dio kompresora oglasnim materijalomamp krpom za uklanjanje prašine i ostataka. Nemojte koristiti jake kemikalije ili abrazivna sredstva za čišćenje.
- Provjerite veze: Regularly inspect all air connections and hoses for leaks or damage. Tighten any loose connections.
- Zaštita od pregrijavanja: The compressor has automatic overheat protection. If it shuts down due to overheating, allow it to cool down completely before restarting. Ensure proper ventilation.
7. Rješavanje problema
Za uobičajene probleme i njihova rješenja pogledajte sljedeću tablicu:
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Kompresor se ne pokreće. | No power, power switch off, thermal overload. | Check power connection and outlet. Ensure power switch is ON. Allow compressor to cool down if it overheated. |
| No air output or low pressure. | Air tank empty, pressure regulator set too low, air leaks, clogged air filter. | Allow tank to fill. Adjust pressure regulator. Check all connections for leaks. Clean or replace air filter. |
| Inconsistent air pressure (pulsation). | Air tank not fully pressurized, regulator malfunction. | Ensure air tank is allowed to fill completely. If problem persists, contact support. |
| Kompresor se pregrijava i isključuje. | Prolonged use, poor ventilation. | Allow the unit to cool down. Ensure adequate ventilation around the compressor. Avoid continuous operation for extended periods. |
| Excessive moisture in air output. | Air tank not drained, clogged air filter. | Regularly drain the air tank. Clean or replace the air filter. |
8. Specifikacije
| Specifikacija | Vrijednost |
|---|---|
| Marka | Fengda |
| Naziv modela | FD-186 |
| Broj modela | AS-186 |
| Voltage | 220-240V/50Hz |
| Vlast | 0.123 kW (1/6 hp) |
| Ubrzati | 1450/1700 o / min |
| Razina buke | 47 dB / 1m |
| Protok zraka | 20-23 l/min (21.5 L/min) |
| Zračna veza | G 1/8 |
| Duljina kabela | 1.9 m |
| Certifikati | CE, GS, ETL, CETL, ROHS |
| Podesivi pritisak | 0 bar to 4 bars |
| Automatic Start Pressure | 3 BAR (43 PSI) |
| Automatic Stop Pressure | 4 BAR (57 PSI) |
| Pressure Regulator Range | 0 – 10 Bars (0-100 PSI) |
| Kapacitet spremnika za zrak | 3 litara |
| Dimenzije (D x Š x V) | 33D x 15Š x 34V cm |
| Težina | 11.02 funti (otprilike 5 kg) |
| Materijal | Metal |
| Preporučena uporaba | Airbrushing |
Image 8.1: Dimensions of the Fengda FD-186 Airbrush Compressor.
9. Jamstvo i podrška
Specific warranty information was not provided in the product details. Please refer to your purchase documentation or contact your retailer for details regarding warranty coverage and customer support.
For technical assistance or inquiries, please contact Fengda customer service or your authorized dealer.