Fengda Mini Airbrush Compressor FD-18-2 User Manual

1. Uvod

Thank you for choosing the Fengda Mini Airbrush Compressor FD-18-2. This oil-free piston compressor is designed for various applications, including airbrushing, cosmetics, nail art, tattoos, hobbies, and home use. Its compact size and low noise level make it suitable for both professional and personal environments. Please read this manual thoroughly before operation to ensure safe and efficient use.

2. Sigurnosne upute

UPOZORENJE: Nepoštivanje ovih sigurnosnih uputa može uzrokovati strujni udar, požar ili teške ozljede.

• Uvijek provjerite odgovara li napajanje naponutage specified on the compressor (220-240V / 50Hz).
• Ne koristite kompresor u vlažnim uvjetima ili u blizini zapaljivih tekućina ili plinova.
• Držite djecu i neovlašteno osoblje podalje od radnog područja.
• Uvijek isključite utikač iz struje prije bilo kakvog održavanja ili čišćenja.
• Do not modify the compressor or its components. Use only original replacement parts.
• Ensure adequate ventilation during operation to prevent overheating. The compressor has thermal protection, but proper airflow is crucial.
• Never direct the air stream at people or animals.
• Wear appropriate personal protective equipment, such as eye protection, when operating the airbrush system.
• The compressor is designed for intermittent use. Avoid continuous operation for extended periods to prevent overheating.

3. Proizvod je gotovview

The Fengda FD-18-2 is a compact, oil-free piston compressor featuring a pressure regulator, filter, and manometer for precise control and clean air delivery. It is designed for quiet operation and portability.

3.1 Uključene komponente

• 1 x Fengda FD-18-2 Mini Airbrush Compressor (without air tank)
• 1 x Output Pressure Regulator with Filter and Manometer
• 1 x kabel za napajanje
• 1 x korisnički priručnik

3.2 Ključne značajke

• Oil-free piston design ensures clean air without oil contamination.
• Integrated pressure regulator with filter and manometer for precise pressure adjustment and moisture separation.
• Automatic start at 3 bar (43.5 PSI) and automatic stop at 4 bar (58 PSI) for efficient operation.
• Thermal protection against overload or overheating.
• Low noise level (47 dB) for comfortable use in various environments.
• Portable and lightweight design with rubber feet for stability.
• Suitable for airbrushes with nozzle sizes from 0.2 mm to 1.0 mm.
• Ideal for model painting, body painting, nail art, fine arts, car painting, touch-ups, cake decorating, textile and t-shirt painting, or other painting applications.

Slika 1: Gotovoview of the Fengda FD-18-2 Mini Airbrush Compressor, showing the main unit, pressure regulator, filter, and power cable.

4. Postavljanje i instalacija

1. Raspakiranje: Pažljivo izvadite sve komponente iz ambalaže. Provjerite ima li oštećenja tijekom transporta.
2. Plasman: Place the compressor on a stable, flat surface. Ensure the rubber feet are securely positioned to minimize vibration. Allow sufficient space around the unit for proper ventilation.
3. Pričvrstite regulator: The pressure regulator with filter and manometer typically comes pre-attached or needs to be screwed onto the air outlet port of the compressor. Ensure it is hand-tightened securely to prevent air leaks.
4. Connect Airbrush Hose: Connect your airbrush hose to the G 1/8" air outlet thread on the pressure regulator. Ensure a tight connection.
5. Priključak za napajanje: Plug the power cable into a suitable grounded electrical outlet (220-240V / 50Hz).

Slika 2: Detaljno view of the pressure regulator, filter, and manometer, essential for controlling air pressure and ensuring clean air.

5. Operacija

1. Uključivanje: Flip the power switch to the "ON" position. The compressor will start and build pressure until it reaches approximately 4 bar (58 PSI), then it will automatically shut off.
2. Podesite tlak: Use the knob on the pressure regulator to adjust the desired working pressure. Turn clockwise to increase pressure, counter-clockwise to decrease. The manometer will display the current output pressure.
3. Započnite s airbrushingom: Once the desired pressure is set, you can begin using your airbrush. The compressor will automatically restart when the pressure drops to approximately 3 bar (43.5 PSI) and stop again when it reaches 4 bar (58 PSI).
4. Zamjenjivač vlage: The integrated filter acts as a moisture trap. Periodically check the transparent bowl for accumulated moisture.
5. Isključivanje: When finished, turn off the compressor using the power switch and disconnect it from the power outlet.

Slika 3: Krupni plan view of the manometer, indicating the adjustable air pressure output.

6. Održavanje

Redovito održavanje osigurava dugotrajnost i optimalne performanse vašeg kompresora.

• Drain Moisture Trap: Regularly check and drain any accumulated moisture from the filter/moisture trap. This prevents water from reaching your airbrush and paint. To drain, unscrew the small valve at the bottom of the transparent bowl.
• Čista vanjština: Obrišite vanjski dio kompresora oglasnim materijalomamp tkanina. Ne koristite jake kemikalije ili abrazivna sredstva za čišćenje.
• Filtar zraka: The compressor has an internal air filter. While not user-serviceable in the same way as the moisture trap, ensure the air intake vents are clear of dust and debris.
• Skladištenje: When not in use, store the compressor in a clean, dry, and dust-free environment.

7. Rješavanje problema

8. Specifikacije

9. Jamstvo i podrška

This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, spare parts, or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Fenghua Bida Machinery Manufacture CO., LTD