Pro'sKit MT-4616 Temperature/Humidity/Dew Point Meter Instruction Manual

1. Proizvod je gotovview

The Pro'sKit MT-4616 is a portable, high-precision meter designed to measure ambient temperature, relative humidity, wet bulb temperature, and dew point temperature. It features data memory for up to 99 readings, unit selection between °F and °C, and additional functions such as Max/Min value display, low battery indication, auto power off, and backlight.

This manual provides detailed instructions for the safe and effective use of your MT-4616 meter.

Figure 1: Pro'sKit MT-4616 Temperature/Humidity/Dew Point Meter. The device is yellow and black, featuring a digital display showing temperature, humidity, dew point, and wet bulb readings. Below the display are various control buttons including power, hold, min/max, memory, and unit selection.

2. Sigurnosne informacije

Please read and understand all safety information before operating this meter. Failure to follow these instructions may result in injury or damage to the device.

• Do not operate the meter in environments with explosive gas, vapor, or dust.
• Avoid exposing the meter to extreme temperatures, direct sunlight, or high humidity for extended periods.
• Do not attempt to open or modify the meter. Refer all servicing to qualified personnel.
• Remove batteries if the meter will not be used for a long period to prevent leakage.
• Držite mjerač dalje od jakih elektromagnetskih polja.

3. Komponente i zaslon

Familiarize yourself with the meter's components and display indicators:

• Glava senzora: Located at the top, for temperature and humidity detection.
• LCD zaslon: Shows readings, units, and various indicators (HOLD, MAX/MIN/AVG, MEM, Low Battery).
• Gumb za uključivanje/isključivanje (①): Uključuje/isključuje mjerač.
• HOLD Button (H): Zamrzava trenutno očitanje na zaslonu.
• Tipka MIN/MAX: Toggles between minimum, maximum, and average readings.
• DP/WB Button: Switches between Dew Point and Wet Bulb temperature display.
• Gumb MEM: Stores the current reading into memory.
• Gumb ČITAJ: Recalls stored data from memory.
• Gumb °C/°F: Selects temperature unit between Celsius and Fahrenheit.
• Gumb za pozadinsko osvjetljenje (☀): Aktivira/deaktivira pozadinsko osvjetljenje zaslona.

4. Postavljanje

4.1 Ugradnja baterije

1. Pronađite poklopac odjeljka za baterije na stražnjoj strani mjerača.
2. Otvorite poklopac pomicanjem ili odvrtanjem (pogledajte dijagram ako je dostupan).
3. Insert the required batteries (e.g., 9V battery) according to the polarity indicators (+/-).
4. Čvrsto namjestite poklopac odjeljka za baterije.

4.2 Početno uključivanje

Press the Power button (①) to turn on the meter. The display will illuminate, and the meter will begin taking measurements.

5. Operacija

5.1 Uključivanje/isključivanje

• To turn ON: Press the Power button (①).
• To turn OFF: Press and hold the Power button (①) for approximately 2 seconds. The meter also features an auto power-off function after a period of inactivity to conserve battery life.

5.2 Mjerenje

Once powered on, the meter will automatically display ambient temperature and relative humidity. Ensure the sensor head is exposed to the environment you wish to measure.

5.3 Odabir jedinice (°C/°F)

Press the °C/°F button to toggle the temperature unit between Celsius and Fahrenheit.

5.4 Dew Point and Wet Bulb Temperature

Press the DP/WB button to cycle through the display of Dew Point temperature and Wet Bulb temperature. The corresponding indicator (DEW POINT or WET BULB) will appear on the LCD.

5.5 Zadržavanje podataka

Press the HOLD button (H) to freeze the current readings on the display. Press it again to release the hold function and resume live measurements.

5.6 MIN/MAX/AVG Function

Press the MIN/MAX button repeatedly to cycle through the minimum, maximum, and average recorded values since the meter was powered on or the function was reset. The corresponding indicator (MIN, MAX, AVG) will be displayed.

5.7 Data Memory (Store/Recall)

• To Store Data: Press the MEM button to save the current readings (temperature, humidity, dew point/wet bulb) into memory. The MEM indicator will flash, and a memory location number will be displayed. The meter can store up to 99 readings.
• Za pozivanje podataka: Press the READ button to view stored data. Use the MIN/MAX buttons to navigate through the stored memory locations.
• To Clear Data: Refer to the full user manual for specific instructions on clearing memory, as this often involves a combination of button presses.

5.8 Pozadinsko osvjetljenje

Press the Backlight button (☀) to turn the display backlight ON or OFF for improved visibility in low-light conditions.

6. Održavanje

6.1 Čišćenje

Obrišite c mjeračaasing s mekim, damp cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the sensor head or other openings.

6.2 Zamjena baterije

When the low battery indicator appears on the display, replace the batteries promptly to ensure accurate readings. Follow the battery installation steps in Section 4.1.

6.3 Skladištenje

Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries.

7. Rješavanje problema

8. Specifikacije

9. Jamstvo i podrška

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer, Pro'sKit, directly. Keep your purchase receipt as proof of purchase.