Universal Office Chair Assembly Manual

1. Važne sigurnosne informacije

Molimo pažljivo pročitajte sve upute prije sastavljanja i upotrebe. Sačuvajte ovaj priručnik za buduću upotrebu.

• Prije početka sastavljanja provjerite jesu li svi dijelovi prisutni i neoštećeni. Nemojte koristiti ako bilo koji dio nedostaje ili je oštećen.
• Assemble the chair on a soft, clean surface to prevent scratching.
• Nemojte previše zatezati vijke tijekom sastavljanja, jer to može oštetiti komponente.
• Držite djecu i kućne ljubimce podalje od područja montaže. Mali dijelovi mogu predstavljati opasnost od gušenja.
• Only use the chair for its intended purpose.
• Nemojte stajati na stolici.

2. Sadržaj paketa

Verify that all components listed below are included in your package.

3. Upute za sastavljanje

Follow these steps carefully to assemble your office chair.

1. Pričvrstite kotačiće na zvjezdastu bazu: Insert each caster (F) into the holes at the end of each leg of the star base (E). Push firmly until they click into place.
2. Umetnite plinski lift: Place the gas lift cylinder (D) into the center hole of the assembled star base (E). Ensure it sits securely.
3. Pričvrstite ploču mehanizma na sjedalo: Align the mechanism plate (G) with the pre-drilled holes on the underside of the seat cushion (B). Ensure the front of the mechanism plate faces the front of the seat. Secure with four M8x25mm screws (I) using the Allen wrench (J).
4. Pričvrstite naslone za ruke na sjedalo: Attach the armrests (C) to the underside of the seat cushion (B) using four M6x20mm screws (H), two per armrest. Do not fully tighten yet.
5. Attach Chair Back to Armrests: Align the chair back (A) with the remaining holes on the armrests (C). Secure with the remaining four M6x20mm screws (H), two per armrest. Now, fully tighten all armrest screws.
6. Spojite sklop sjedala na plinski lift: Carefully place the assembled seat and back onto the gas lift cylinder (D) protruding from the star base. Press down firmly to secure.

Your office chair is now assembled.

4. Upute za rad

Familiarize yourself with the chair's adjustment features for optimal comfort.

• Podešavanje visine: Za podizanje sjedala, podignite polugu koja se nalazi ispod desne strane sjedala dok se odmičete od stolca. Za spuštanje sjedala, podignite polugu dok sjedite. Otpustite polugu na željenoj visini.
• Zaključavanje/otključavanje nagiba: Pull the same lever outwards to unlock the tilt function, allowing the chair back to recline. Push the lever inwards to lock the chair back in an upright position.
• Napetost nagiba: Rotate the round knob located under the front-center of the seat to adjust the tension of the tilt mechanism. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• Armrest Adjustment (if applicable): Some models feature adjustable armrests. Look for buttons or levers on the armrests to adjust their height or pivot.

5. Održavanje

Regular maintenance will prolong the life of your office chair.

• Čišćenje: Obrišite površine mekom, damp cloth. For fabric upholstery, use a mild fabric cleaner. Avoid harsh chemicals or abrasive cleaners.
• Provjera pričvršćivača: Povremeno provjeravajte sve vijke i matice kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovno zategnite.
• Caster Cleaning: Remove any hair or debris that may accumulate around the casters to ensure smooth movement.
• Podmazivanje: The gas lift cylinder is maintenance-free. Do not attempt to lubricate it.

6. Rješavanje problema

Rješenja uobičajenih problema potražite u ovom odjeljku.

7. Specifikacije

Key technical details of your office chair.