Uvod
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Satco S9750 30W LED HID Replacement Light Bulb. This Hi-Pro multi-beam LED lamp is designed for industrial and commercial applications, offering high lumen output and adjustable, multi-directional light. It is a direct wire range voltage 100-277V replacement for HID, CFL, and incandescent bulbs, approved for totally enclosed fixtures.
Sigurnosne informacije
- UPOZORENJE: Opasnost od strujnog udara. Isključite napajanje prije instalacije ili servisiranja.
- Osigurajte opskrbu voltage is compatible with the bulb's operating voltage (100-277V).
- Ne rastavljajte niti modificirajte žarulju. Unutra nema dijelova koje korisnik može sam servisirati.
- This bulb is suitable for use in damp locations and approved for totally enclosed fixtures.
- Always handle the bulb by its base to avoid damaging the LED panels.
- Ako niste sigurni u bilo koji dio postupka instalacije, obratite se kvalificiranom električaru.
Sadržaj paketa
Prije nastavka instalacije provjerite jesu li sve komponente prisutne i neoštećene.
- 1 x Satco S9750 30W LED HID Replacement Light Bulb
Postavljanje i instalacija
Follow these steps for proper installation of your Satco S9750 LED HID Replacement Light Bulb:
- Prekid napajanja: Before beginning any installation, ensure the power to the fixture is turned off at the circuit breaker.
- Uklonite staru žarulju: Carefully remove the existing HID, CFL, or incandescent bulb from the fixture.
- Balastni bypass: This LED bulb requires a direct wire connection and bypasses the existing ballast. If your fixture has a ballast, it must be bypassed or removed by a qualified electrician. The bulb operates on a direct wire range voltage od 100-277V.
- Provjerite kompatibilnost uređaja: Ensure the fixture has a medium (E26) base. The minimum compartment size for enclosed fixtures is 11 inches (Length) x 8 inches (Width) x 8 inches (Depth). The lamp length is 6.37 inches, and the diameter is 3.18 inches when closed, expanding to 7.68 inches when open.
- Ugradnja nove žarulje: Screw the Satco S9750 LED bulb firmly into the medium (E26) base socket. Do not overtighten.
- Vrati snagu: Once the bulb is securely installed and any necessary ballast bypass is complete, restore power at the circuit breaker.
Upute za rad
The Satco S9750 features adjustable light panels, allowing you to customize the beam angle for various lighting needs.
- Podešavanje kuta snopa: The light panels can be manually adjusted and locked into place to create three distinct beam angle options:
- 360° Beam: Panels fully closed, providing a wide, omnidirectional light spread (approx. 3.2 inches width).
- 270° Beam: Panels partially open, directing light over a broader area (approx. 6.8 inches width).
- 180° Beam: Panels fully open, concentrating light in a specific direction (approx. 7.7 inches width).
- Gently move the panels to the desired position until they click or lock into place. Avoid excessive force.
Održavanje
The Satco S9750 LED bulb requires minimal maintenance.
- Čišćenje: Ensure power is disconnected before cleaning. Use a soft, dry cloth to wipe the bulb. Do not use liquid cleaners or abrasive materials.
- Inspekcija: Povremeno provjeravajte žarulju i učvršćenje na znakove oštećenja ili labavih spojeva.
Rješavanje problema
If your Satco S9750 LED bulb is not functioning correctly, consider the following:
- Bez svjetla:
- Provjerite je li napajanje uređaja uključeno.
- Ensure the bulb is screwed in tightly to the socket.
- Verify that the ballast has been properly bypassed or removed.
- Inspect the circuit breaker for any tripped circuits.
- Trepereće svjetlo:
- Ensure the bulb is securely seated in the socket.
- Provjerite stabilno napajanje.
If issues persist after performing these checks, contact customer support.
Tehnički podaci
| Značajka | Specifikacija |
|---|---|
| Marka | Satco |
| Broj modela | S9750 |
| Vrsta svjetla | LED |
| Wattage | 30 vata |
| HID Ekvivalent | 150 vat |
| CFL Equivalent | 55 vat |
| Žarulja ekvivalent | 200 vat |
| Baza žarulje | E26 (srednje podnožje) |
| Voltage | 100-277 Volti AC |
| Temperatura boje | 5000 Kelvina |
| Lumeni | 3,900 lumena |
| Indeks reprodukcije boja (CRI) | 80 |
| Kut snopa | Adjustable (180°, 270°, 360°) |
| IP ocjena | IP65 |
| Raspon radne temperature | -20°C do 65°C |
| Materijal | Plastični |
| Certifikati | ETL, RoHS, UL Listed |
| Lamp Length (closed) | 6.37 inča |
| Diameter (closed) | 3.18 inča |
| Diameter (open) | 7.68 inča |
| Težina artikla | 4.8 unci |
Jamstvo i podrška
Zamjenska LED HID žarulja Satco S9750 dolazi s 5-godišnje ograničeno jamstvo.
For warranty claims, technical support, or further assistance, please contact Satco customer service through their official website or the retailer where the product was purchased. Please have your model number (S9750) and proof of purchase available when contacting support.