Bogen AT10A

Bogen AT10A 10-Watt Attenuator User Manual

Model: AT10A

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the Bogen AT10A 10-Watt Attenuator. The AT10A is designed to control the volume of individual speakers or groups of speakers in a constant voltage (70V or 25V) audio distribution system.

Prije ugradnje i rada pažljivo pročitajte ovaj priručnik kako biste osigurali pravilnu upotrebu i spriječili oštećenje uređaja ili priključene opreme.

Proizvod gotovview

Bogen AT10A 10-Watt Attenuator front view

Slika: prednja strana view of the Bogen AT10A 10-Watt Attenuator. The unit features a silver faceplate with a black rotary volume knob. The knob is marked with numbers from 0 to 10, indicating volume levels. The Bogen logo is visible at the bottom center, and "AT-10A" is printed in the bottom right corner.

The Bogen AT10A is a wall-plate style attenuator, providing 10 steps of volume control plus an "OFF" position. It is suitable for use with 25V or 70V constant voltage speaker lines and has a power rating of 10 watts.

Postavljanje i instalacija

Sigurnosne mjere opreza

  • Ensure all power to the audio system is disconnected before beginning installation.
  • Instalaciju treba izvršiti kvalificirano osoblje u skladu s lokalnim električnim propisima.
  • Do not exceed the maximum power rating of 10 watts.

Montaža

  1. The AT10A is designed to fit into a standard single-gang electrical box.
  2. Secure the electrical box in the desired wall location.
  3. Ensure adequate space for wiring connections behind the attenuator.

Priključci ožičenja

The AT10A features screw terminals for input and output connections. Refer to the diagram below for typical wiring.

  • Spojite stalnu voltage audio source (e.g., amplifier output) to the "INPUT" terminals.
  • Connect the speaker(s) to be controlled to the "OUTPUT" terminals.
  • Maintain correct polarity (+ to + and - to -) for all connections.
  • Provjerite jesu li svi spojevi sigurni i bez kratkih spojeva.

(Note: A detailed wiring diagram would typically be provided here by the manufacturer. For this manual, general instructions are given.)

Upute za rad

The Bogen AT10A provides simple rotary control for adjusting the volume level of connected speakers.

  1. Uključivanje: After installation, restore power to the audio system.
  2. Podešavanje glasnoće: Rotate the knob clockwise to increase the volume and counter-clockwise to decrease it.
  3. Razine glasnoće: The knob features marked positions from 0 to 10. Position '0' represents the "OFF" or minimum volume setting, while '10' represents the maximum volume setting.
  4. Fino podešavanje: Adjust the knob gradually to achieve the desired listening level.

Održavanje

The Bogen AT10A is designed for reliable, long-term operation with minimal maintenance.

  • Čišćenje: To clean the faceplate, gently wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Inspekcija: Periodically check the attenuator for any visible damage or loose connections. If any issues are found, disconnect power and address them promptly.
  • Nema dijelova koje može servisirati korisnik: The internal components of the AT10A are not user-serviceable. Do not attempt to open or repair the unit. Refer servicing to qualified personnel.

Rješavanje problema

ProblemMogući uzrokOtopina
Nema zvuka iz zvučnika.
  • Attenuator set to '0' (OFF).
  • Labavi ili neispravni spojevi ožičenja.
  • Nema snage za ampsredstvo za podsticanje.
  • Neispravan ampdizalica ili zvučnici.
  • Rotate the knob to a higher volume setting.
  • Provjerite sve spojeve ožičenja radi sigurnosti i ispravnog polariteta.
  • Provjerite ampUređaj za spašavanje je uključen i radi.
  • Test amplifier and speakers independently.
Distorted or low-quality sound.
  • Overdriving the attenuator (exceeding 10W).
  • Labave veze.
  • Faulty speaker or ampsredstvo za podsticanje.
  • Ensure the total power of connected speakers does not exceed 10 watts.
  • Provjerite sve spojeve ožičenja.
  • Test individual components.

If troubleshooting steps do not resolve the issue, contact Bogen technical support or a qualified audio technician.

Tehnički podaci

ZnačajkaDetalj
ModelAT10A
Nazivna snaga10 vata
Voltage Kompatibilnost25V / 70V konstantna voltage Sustavi
Koraci glasnoće10 steps plus "OFF"
MontažaJednodijelna električna kutija
Dimenzije (paket)9.49 x 8.39 x 3.94 inča
Težina artikla1.2 funti
ASINB01IE047U6
UPC080850445046
Datum prve dostupnosti13. srpnja 2016

Podrška i kontakt informacije

For technical assistance, product inquiries, or further information, please contact Bogen Communications, Inc.

  • Proizvođač: Bogen Communications, Inc.
  • Webstranica: www.bogen.com (Pramppoveznica, stvarna poveznica može se razlikovati)
  • Služba za korisnike: Refer to the official Bogen webstranicu za trenutne kontaktne podatke.

Napomena: Specifikacije proizvoda podložne su promjenama bez prethodne najave.

© 2024 Bogen Communications, Inc. Sva prava pridržana.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.