FIBARO MCO Home MH8-FC4 Fan Coil Thermostat

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the FIBARO MCO Home MH8-FC4 Fan Coil Thermostat. This device is designed for controlling fan coil units in central AC systems (2-pipe or 4-pipe configurations) and integrates with Z-Wave smart home systems. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Key features of the MH8-FC4 thermostat include:

• Applicable to 2-pipe or 4-pipe fan coil control in central AC systems.
• Tempered glass panel with capacitive touch buttons for intuitive control.
• Clear display screen showing essential control information.
• Intelligent On/Off control for fan speed and electric valve.
• Designed for recessed installation in an 86 x 86 mm junction box.

2. Sigurnosne informacije

Molimo vas da se pridržavate sljedećih sigurnosnih mjera opreza kako biste spriječili oštećenje uređaja ili osobne ozljede:

• Instalaciju mora izvršiti kvalificirani električar u skladu s lokalnim električnim propisima i propisima.
• Disconnect power at the circuit breaker before installing or servicing the thermostat.
• Ne izlažite uređaj vlazi, ekstremnim temperaturama ili izravnoj sunčevoj svjetlosti.
• Provjerite odgovara li napajanje uređaju (230 V).
• Ne pokušavajte sami popravljati ili modificirati uređaj. Obratite se kvalificiranom servisnom osoblju.

3. Sadržaj paketa

Provjerite jesu li sve komponente prisutne u paketu:

• FIBARO MCO Home MH8-FC4 Thermostat (White)
• Korisnički priručnik (ovaj dokument)

4. Proizvod je gotovview

The MH8-FC4 thermostat features a sleek design with a tempered glass panel and an integrated display. The front panel includes capacitive touch buttons for various functions and a clear screen for displaying temperature, time, and operating modes.

Slika 4.1: Prednja strana view of the MCO Home MH8-FC4 Fan Coil Thermostat. The display shows current time, room temperature, and various operational icons. Capacitive buttons are visible below the screen.

The rear of the thermostat houses the wiring terminals for power, fan control, and valve control, designed for secure and organized connections within a standard junction box.

Slika 4.2: Stražnji dio view of the MCO Home MH8-FC4 Thermostat. This image displays the terminal block for electrical connections and the product label indicating the model MH8-FC-EU.

5. Instalacija

The MH8-FC4 thermostat is designed for recessed installation into a standard 86 x 86 mm wall junction box. Ensure that the power supply is disconnected before beginning installation.

5.1 Dijagram ožičenja (općenito)

A typical wiring setup for a 4-pipe fan coil system includes connections for live (L), neutral (N), fan speeds (low, medium, high), and valve control (heating and cooling valves). Refer to the specific wiring diagram provided with your fan coil unit and the detailed diagram in the full product manual for precise connections.

• Napajanje: Connect the 230V AC live and neutral wires to the designated L and N terminals.
• Kontrola ventilatora: Connect the fan speed wires (Low, Medium, High) from your fan coil unit to the corresponding terminals on the thermostat.
• Kontrola ventila: Connect the heating and cooling valve control wires to the appropriate valve terminals.

5.2 Montaža

1. Ensure the junction box is properly installed and secured in the wall.
2. Connect all necessary wires to the terminals on the rear of the thermostat as per the wiring diagram.
3. Carefully push the wired thermostat module into the junction box.
4. Secure the thermostat to the junction box using the provided screws.
5. Attach the front glass panel to complete the installation.

After installation, restore power and proceed to initial setup and configuration.

6. Upute za rad

The MH8-FC4 thermostat features a touchscreen display and capacitive buttons for easy control of your fan coil system.

6.1 Osnovni rad

• Uključivanje/isključivanje: Touch the power icon to turn the thermostat on or off.
• Podešavanje temperature: Pomoću strelica gore/dolje na zaslonu postavite željenu temperaturu.
• Odabir načina rada: Cycle through operating modes (e.g., Heat, Cool, Auto, Fan Only) by touching the mode icon.
• Brzina ventilatora: Adjust fan speed (Low, Medium, High, Auto) by touching the fan icon.

6.2 Z-Wave Connectivity

The MH8-FC4 thermostat supports Z-Wave technology for smart home integration. Refer to your Z-Wave gateway's instructions for adding new devices to your network. Once connected, you can control the thermostat remotely via your smart home application, including temperature settings, mode changes, and fan speed adjustments.

The thermostat also supports voice control when integrated with compatible Z-Wave gateways and voice assistants.

7. Održavanje

The MH8-FC4 thermostat requires minimal maintenance.

• Čišćenje: Nježno obrišite staklenu ploču mekom,amp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.
• Inspekcija: Periodically check for any loose connections or signs of damage. If any issues are found, disconnect power and consult a qualified technician.

8. Rješavanje problema

If you encounter issues with your MH8-FC4 thermostat, refer to the following common problems and solutions:

If the problem persists, contact customer support or a qualified technician.

9. Specifikacije

10. Jamstvo i podrška

For warranty information and technical support, please refer to the official FIBARO or MCO Home website, or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.

Online resursi i često postavljana pitanja mogu biti dostupni i na stranicama za podršku proizvođača.