MSA FP5K dvostruka noga koja apsorbira energiju Web Korisnički priručnik za vrpcu

Uvod

This manual provides essential information for the proper use, maintenance, and inspection of the MSA FP5K Energy-Absorbing Twin-Leg Web Lanyard, Model 10150478. Adherence to these instructions is crucial for user safety and product longevity. This lanyard is designed for fall arrest applications, specifically for tie-back use, and incorporates a Sure-Stop shock absorber to limit fall arrest forces.

Proizvod gotovview

The image displays the MSA FP5K Energy-Absorbing Twin-Leg Web Lanyard. It features a red web strap, a central energy absorber pack, and two FP5K carabiners at the ends of the twin legs. The lanyard is designed for tie-back applications, allowing one of the FP5K carabiners to be connected directly back to the lanyard itself. The energy absorber is visible as a white, cylindrical pack with "12ft 1350lbs" printed on it, indicating its freefall rating and maximum arrest force. The webbing is described as "Monster-Edge" for increased abrasion resistance.

Ključne karakteristike:

• FP5K Carabiner: Specifically designed for tie-back applications with 5,000 lb gate strength in any direction.
• Twin-Leg Configuration: Provides continuous fall protection when moving between anchor points.
• Podesivo: Allows for flexibility in various work environments.
• Sure-Stop Shock Absorber: Limits fall arrest forces to below 900 pounds.
• Monster-Edge Webbing: Features 12,000 pound minimum breaking strength and enhanced abrasion resistance.
• Internal Wear Indicator: Two yellow threads alert users when the lanyard should be removed from service due to severe abrasion.

Postavljanje i instalacija

Proper setup is critical for safety. Always follow these guidelines:

1. Pregled prije uporabe: Before each use, thoroughly inspect the lanyard for any signs of damage, wear, cuts, abrasions, or chemical exposure. Check the webbing, stitching, hardware (carabiners, gates, springs), and the energy absorber pack. Ensure the internal wear indicator (yellow threads) is not visible.
2. Odabir sidrišne točke: Select an anchor point capable of supporting 5,000 lbs (22.2 kN) per worker attached. The anchor point should be located directly above the work area whenever possible to minimize swing fall hazards.
3. veza:
   • Connect one FP5K carabiner to a compatible fall arrest harness D-ring (typically the dorsal D-ring).
   • Connect the other FP5K carabiner to the selected anchor point.
   • For tie-back applications, the FP5K carabiner can be connected directly back to the lanyard webbing, ensuring the connection is made to a structural part of the lanyard designed for this purpose, and not to the energy absorber pack or stitching that is not reinforced for tie-back.
4. Zahtjevi za odobrenje: Ensure adequate fall clearance below the work area. Account for lanyard length, energy absorber deployment (up to 48 inches), harness stretch, and a safety factor. Refer to local regulations and standards for specific clearance calculations. This 12FT Freefall version is designed for situations where tying off at feet is necessary, requiring greater clearance.

Upute za rad

The MSA FP5K Twin-Leg Lanyard is designed for fall arrest and restraint. Always ensure proper training and understanding of fall protection principles before use.

• Kontinuirana veza: When moving between anchor points, always maintain a 100% tie-off by ensuring one leg of the twin lanyard is connected to an anchor point at all times.
• Minimize Free Fall: Position anchor points to minimize the potential free fall distance. The Sure-Stop shock absorber is designed to deploy during a fall to reduce impact forces.
• Izbjegavajte prepreke: Ensure the lanyard path is clear of sharp edges, abrasive surfaces, or moving machinery that could damage the webbing or interfere with its function.
• Swing Fall Hazard: Avoid working in positions where a swing fall could occur. Position the anchor point directly overhead to prevent swinging into structures or objects in the event of a fall.
• Post-Fall Procedure: If a fall occurs, the lanyard must be immediately removed from service and destroyed. It is a single-use energy-absorbing device. Do not attempt to reuse a lanyard that has experienced a fall.

Održavanje i skladištenje

Proper maintenance and storage extend the life of your lanyard and ensure its reliability.

• Čišćenje: Clean the lanyard with a mild soap and water solution. Rinse thoroughly with clean water and allow it to air dry completely in a shaded, well-ventilated area away from direct sunlight or heat. Do not use harsh chemicals, solvents, or bleach.
• Inspekcija: In addition to pre-use inspections, a competent person must perform a formal inspection at least every six months, or more frequently based on use and environmental conditions. Document all inspections.
• Skladištenje: Store the lanyard in a cool, dry, clean area, away from direct sunlight, extreme temperatures, corrosive chemicals, and sharp objects. Do not store in areas where it could be exposed to moisture or pests.
• Oštećenje: Any lanyard showing signs of damage, excessive wear, or having been subjected to fall arrest forces must be immediately removed from service and tagged "UNUSABLE" or "DO NOT USE" and destroyed to prevent accidental reuse.

Rješavanje problema

This section addresses common issues and concerns regarding the lanyard's condition and use.

Tehnički podaci

Jamstvo i podrška

For specific warranty information and technical support, please contact MSA Safety directly. It is recommended to register your product upon purchase.

• Proizvođač: MSA Sigurnost
• Webstranica: www.msasafety.com
• Podaci za kontakt: Pogledajte upute proizvođača website for the most current contact details, including phone numbers for technical support and customer service.

Always ensure that any repairs or modifications are performed only by MSA or an authorized service center. Unauthorized alterations will void the warranty and could compromise user safety.