Kohler 76331-CP Shower Arm with 2-Way Diverter Instruction Manual

1. Proizvod je gotovview

The Kohler 76331-CP Shower Arm with 2-Way Diverter is a wall-mount fixture designed to direct water flow between a showerhead and a handshower. Constructed from brass, this unit features a polished chrome finish, engineered to resist corrosion and tarnishing. It includes a flange for installation and is compatible with standard 1/2-inch NPT connections.

Image 1.1: The Kohler 76331-CP Shower Arm with 2-Way Diverter, showcasing its polished chrome finish and integrated diverter mechanism.

2. Sigurnosne informacije

• Uvijek isključite glavni dovod vode prije početka bilo kakve instalacije ili održavanja.
• Nosite odgovarajuću osobnu zaštitnu opremu, poput zaštitnih naočala i rukavica.
• Ako niste sigurni u bilo koji dio postupka instalacije, obratite se kvalificiranom vodoinstalateru.
• Provjerite jesu li svi spojevi sigurni kako biste spriječili curenje.
• Do not overtighten connections, as this can damage the product or plumbing.

3. Sadržaj paketa

Prije početka instalacije provjerite jesu li sve komponente prisutne.

• Shower Arm with 2-Way Diverter
• Prirubnica

Note: Showerheads, handshowers, and additional flanges (K-76334 Traditional flange, K-76335 Square flange) are sold separately.

4. Specifikacije

5. Upute za instalaciju

5.1 Potrebni alati i materijali (nisu uključeni)

• Podesivi ključ
• Plumber's tape (thread sealant)
• Mekana tkanina

5.2 Koraci instalacije

1. Isključite dovod vode: Locate and turn off the main water supply to your shower area. Open existing shower faucets to relieve pressure.
2. Remove Existing Shower Arm (if applicable): Unscrew the existing shower arm from the wall fitting. Clean any old sealant or debris from the wall pipe threads.
3. Prepare New Shower Arm: Apply plumber's tape clockwise around the threaded end of the new Kohler shower arm (the end that connects to the wall). Ensure several wraps for a watertight seal.
4. Install Flange: Slide the decorative flange over the shower arm, ensuring it faces the wall.
5. Attach Shower Arm to Wall: Carefully thread the shower arm into the 1/2-inch NPT wall fitting. Hand-tighten first, then use an adjustable wrench to tighten an additional 1/2 to 1 full turn until secure and properly oriented. Do not overtighten.
6. Position Flange: Slide the flange flush against the wall to cover the opening.
7. Install Showerhead and Handshower: Attach your desired showerhead to the top outlet and your handshower hose to the bottom outlet of the diverter. Apply plumber's tape to these connections as well.
8. Test na curenje: Slowly turn the main water supply back on. Check all connections for leaks. If leaks occur, turn off water, tighten connections slightly, and re-test.

6. Upute za rad

The 2-way diverter allows you to easily switch water flow between your main showerhead and a connected handshower.

• To use the Showerhead: Ensure the diverter handle is in the position that directs water upwards to the showerhead.
• To use the Handshower: Rotate the diverter handle to the position that directs water downwards to the handshower.
• To turn off water: Use your shower's main faucet handle to stop the water flow. The diverter only controls the direction of water, not the on/off function or temperature.

7. Održavanje i njega

• Čišćenje: Očistite polirani kromirani završni sloj mekom krpomamp krpom. Izbjegavajte abrazivna sredstva za čišćenje, jake kemikalije ili abrazivne spužvice jer mogu oštetiti završnu obradu.
• Čišćenje mjesta: For water spots, use a mild soap solution and rinse thoroughly with clean water, then dry with a soft cloth.
• Redoviti pregled: Periodically check connections for any signs of leaks or corrosion.

8. Rješavanje problema

9. Jamstvo i podrška

For specific warranty information and customer support, please refer to the official Kohler website or contact Kohler directly. Keep your purchase receipt for warranty claims.

Kohlerov službenik Webstranica: www.kohler.com