Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer User Manual

1. Uvod

This manual provides essential information for the safe and efficient operation of your Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This printer is designed for various label printing applications, offering both thermal transfer and direct thermal printing capabilities at 203 dpi resolution. It features an LCD display for easy navigation, a tear-off function, a real-time clock, and multiple connectivity options including USB 2.0, two USB host ports, and LAN.

Figure 1: Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This image shows the compact desktop printer with its LCD display and label output slot.

2. Sigurnosne informacije

Please read all safety instructions before operating the printer to prevent injury or damage to the device. Keep this manual for future reference.

• Koristite samo kabel za napajanje koji je isporučen s pisačem.
• Ne izlažite pisač vodi ili prekomjernoj vlazi.
• Pazite da je pisač postavljen na stabilnu, ravnu površinu.
• Izbjegavajte blokiranje ventilacijskih otvora.
• Disconnect power before cleaning or servicing the printer.
• Do not attempt to open or repair the printer yourself. Refer to qualified service personnel.

3. Sadržaj paketa

Provjerite jesu li svi artikli prisutni u paketu:

• Intermec PC43TB01100201 Printer Unit
• Američki kabel za napajanje
• Kratki vodič (nije uključen u ovaj priručnik)
• Software/Driver CD (may vary by package)

4. Postavljanje

4.1 Raspakiranje i postavljanje

1. Pažljivo izvadite pisač iz pakiranja.
2. Postavite pisač na ravnu, stabilnu površinu s odgovarajućom ventilacijom.
3. Ensure easy access to power outlets and computer ports.

4.2 Povezivanje struje

1. Connect the supplied US power cord to the printer's power input.
2. Uključite drugi kraj kabela za napajanje u uzemljenu električnu utičnicu.

4.3 Spajanje na računalo

The PC43TB01100201 printer supports USB and LAN connectivity.

• USB veza: Connect a USB cable (not always included) from the printer's USB 2.0 port to an available USB port on your computer.
• LAN veza: Connect an Ethernet cable (not always included) from the printer's LAN port to your network router or switch.

4.4 Loading Media (Labels/Ribbon)

Refer to the printer's internal diagrams or quick start guide for specific instructions on loading labels and, if using thermal transfer, the ribbon. Ensure the media is correctly aligned for proper printing.

• Otvorite poklopac pisača.
• Place the label roll onto the media supply spindle.
• Feed the labels through the media guides.
• If using thermal transfer, install the ribbon according to the printer's instructions.
• Zatvorite poklopac pisača.

5. Upute za rad

5.1 Uključivanje/isključivanje

• Za uključivanje: Press the power button located on the printer. The LCD display will illuminate.
• Za isključivanje: Press and hold the power button until the printer shuts down.

5.2 Korištenje LCD zaslona

The LCD display provides status information and allows for configuration changes. Navigate through menus using the control buttons (Push Button Controller Type) adjacent to the display.

• View printer status and error messages.
• Adjust settings such as print darkness, speed, and media type.
• Perform calibration for new media rolls.

5.3 Ispis

Once the printer is connected to your computer and drivers are installed, you can print labels from compatible software applications. The printer supports Latin fonts.

1. Open your label design software or application.
2. Create or open the label design.
3. Select the Intermec PC43TB01100201 as your printer.
4. Adjust print settings as needed (e.g., number of copies, print quality).
5. Pokrenite zadatak ispisa.

The printer features a tear-off function for easy label separation after printing.

6. Održavanje

6.1 Čišćenje pisača

Redovito čišćenje pomaže u održavanju kvalitete ispisa i produžuje vijek trajanja pisača.

• Ispisna glava: Clean the printhead with an alcohol swab or printhead cleaning wipe when print quality degrades or after every few media roll changes. Ensure the printer is off and cool.
• Platen Roller: Clean the platen roller with an alcohol swab to remove adhesive residue or dust.
• Vanjski: Obrišite vanjštinu mekom, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje.

6.2 Replacing Media and Ribbon

Replace media rolls and thermal transfer ribbons as they run out. Follow the loading instructions in Section 4.4.

7. Rješavanje problema

This section addresses common issues you might encounter. For more complex problems, contact Intermec support.

• Pisač ne reagira:
  • Provjerite priključke za napajanje.
  • Verify USB or LAN cable connections.
  • Ponovno pokrenite pisač i računalo.
  • Provjerite jesu li upravljački programi pisača ispravno instalirani.
• Loša kvaliteta ispisa:
  • Clean the printhead (refer to Section 6.1).
  • Adjust print darkness settings via the LCD display or printer driver.
  • Ensure correct media type is selected.
  • Check if the ribbon (for thermal transfer) is correctly installed and not depleted.
• Etikete se ne uvlače ispravno:
  • Reload media, ensuring it is properly aligned in the guides.
  • Calibrate the printer for the loaded media type.
  • Check for any obstructions in the media path.
• LCD Display Error Messages:
  • Consult the printer's on-screen help or the full user manual for specific error code meanings and resolutions.

8. Specifikacije

9. Jamstvo i podrška

For detailed warranty information, please refer to the documentation provided with your purchase or contact your reseller. Intermec provides support for its products.

• Proizvođač: Intermec
• Broj modela: PC43TB01100201
• For technical assistance, visit the official Intermec support webstranicu ili se obratite njihovoj službi za korisnike.