Amazon Basics stolica za računalo za srednji dio ureda (model GF-9390M-1) s uputama za uporabu

Uvod

This manual provides essential instructions for the assembly, operation, and maintenance of your Amazon Basics Mid-Back Office Computer Task Desk Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.

Sigurnosne informacije

UPOZORENJE:

• Always follow the assembly instructions provided in this user manual to ensure safe use.
• Ne prekoračujte maksimalnu nosivost od 124.74 kg (275 funte).
• Be cautious of the swivel feature to prevent tripping.
• Ensure all screws are fully tightened before use. Periodically check and re-tighten all fasteners.

Sadržaj paketa

Prije početka montaže provjerite jesu li sve komponente prisutne:

• Jastuk za sjedenje
• Jastuk za leđa
• Gas Lift (Cylinder)
• Hardware (Screws, Hex Tool)
• Baza (baza zvijezde s 5 krakova)
• Nasloni za ruke (2)
• Kotači (5)
• Mechanism (for seat height and tilt)

Postavljanje i montaža

Follow these steps to assemble your office chair. An assembly video is provided for visual guidance.

1. Insert Casters: Firmly press each of the five casters (wheels) into the holes at the end of each leg of the 5-point star base. Ensure they are securely seated.
2. Umetnite cilindar: Place the gas lift cylinder into the center hole of the assembled base. Ensure the narrower end of the cylinder points upwards.
3. Pričvrstite mehanizam na sjedalo: Align the seat mechanism with the pre-drilled holes on the underside of the seat cushion. Use the provided screws (typically 'A' type) and the hex tool to attach it. Do not fully tighten yet.
4. Place Seat on Cylinder: Carefully place the assembled seat (with mechanism attached) onto the gas lift cylinder. The cylinder should fit snugly into the mechanism's central opening.
5. Pričvrstite naslone za ruke: Position the armrests on either side of the seat, aligning them with the pre-drilled holes on both the seat and the backrest. Use the appropriate screws (typically 'B' type) to attach them. Do not fully tighten these screws at this stage.
6. Pričvrstite naslon za leđa: Align the backrest with the armrests and the seat. Use the remaining screws (typically 'C' type) to secure the backrest to the armrests.
7. Zategnite sve vijke: Once all components are loosely assembled, fully tighten all screws using the hex tool. Ensure all connections are firm and secure.
8. Place Screw Caps: Cover any visible screw heads with the provided plastic caps for a finished appearance.

Upute za rad

Vaša uredska stolica Amazon Basics nudi nekoliko podesivih značajki za personaliziranu udobnost:

• Podešavanje visine sjedala: To raise the seat, lift the lever located under the seat while taking your weight off the chair. To lower the seat, lift the lever while remaining seated. Release the lever at the desired height.
• Funkcija nagiba: The chair features a tilt mechanism. To enable tilting, pull the lever outwards. To lock the chair in an upright position, push the lever inwards.
• Podešavanje napetosti nagiba: Rotate the round knob located under the seat (usually at the front of the mechanism) to adjust the tension of the tilt. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• Okretanje od 360 stupnjeva: The chair is designed with a 360-degree swivel for easy movement and multi-tasking.
• Kotači s kotačima: The five-point base with casters allows for smooth-rolling mobility across various floor surfaces.

Održavanje

To maintain the appearance and longevity of your chair:

• Čišćenje: Obrišite oglasomamp krpu. Izbjegavajte jake kemikalije ili abrazivna sredstva za čišćenje koja mogu oštetiti umjetnu kožu.
• Pričvršćivači: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to prevent wobbling or instability.
• Kotačići: Kotačiće držite čistima od ostataka (kose, prašine itd.) kako biste osigurali glatko kotrljanje.

Rješavanje problema

If you encounter issues with your chair, consider the following:

• Stolica je nestabilna ili klimava: Ensure all assembly screws are fully tightened. Check the gas lift cylinder for proper seating in the base and mechanism.
• Difficulty leaning back or adjusting tilt: Check the tilt tension knob under the seat. Rotate it counter-clockwise to loosen the tension. Ensure the tilt lock lever is disengaged (pulled outwards).
• Screws not fitting or stripping: Ensure you are using the correct screws for each step as indicated in the assembly instructions. Do not overtighten screws during initial assembly; tighten fully only after all components are loosely fitted. If a screw is stripped, contact customer support for replacement parts.
• Kotačići se ne kotrljaju glatko: Inspect casters for trapped debris (hair, lint) and clean them. Ensure they are fully inserted into the base.

Tehnički podaci

Jamstvo i podrška

For warranty information or technical support, please refer to the product packaging or contact Amazon Basics customer service directly. Keep your purchase receipt for any warranty claims.