korisnički priručnik

1. Uvod

Hvala na kupnjiasing the Project Source 2-Pack 13-inch Bronze Flush Mount Light fixtures. These fixtures are designed to provide ambient lighting with a traditional aesthetic, featuring a durable bronze finish and an elegant alabaster glass shade. They are suitable for various indoor spaces, including bathrooms, bedrooms, kitchens, dining rooms, and living rooms, enhancing the decor while providing reliable illumination.

Slika 1: Two Project Source 13-inch Bronze Flush Mount Light fixtures. Each fixture features a round bronze base and a dome-shaped alabaster glass shade, secured by a small finial at the bottom center of the shade.

2. Važne sigurnosne informacije

UPOZORENJE: Opasnost od strujnog udara. Isključite napajanje na kutiji s osiguračima ili prekidaču prije instalacije ili servisiranja.

• Pažljivo pročitajte sve upute prije početka instalacije.
• Svi električni spojevi moraju biti u skladu s lokalnim propisima, uredbama ili Nacionalnim električnim kodeksom (NEC). Posavjetujte se s kvalificiranim električarom ako niste upoznati s pravilnim spajanjem električnih instalacija.
• Use only UL-listed wire connectors for the electrical connections.
• Nemojte prekoračiti maksimalnu vattage specified for this fixture (14 Watts per bulb).
• Nosite zaštitne naočale i odgovarajuću zaštitnu opremu tijekom instalacije.
• Provjerite je li učvršćenje pravilno uzemljeno.

3. Sadržaj paketa

Prije početka instalacije provjerite jesu li sve komponente prisutne:

• 2 x 13-inch Bronze Flush Mount Light Fixtures (with alabaster glass shades)
• Pribor za montažu (vijci, matice, nosač)
• Napomena: Žarulje NISU uključene.

4. Specifikacije

5. Postavljanje i instalacija

Potrebni alati: Phillips head screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.

Koraci prije instalacije:

1. Isključite napajanje: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the power completely before proceeding.
2. Pripremite područje: Clear the work area and ensure you have stable footing if using a ladder.
3. Raspakirati: Pažljivo izvadite uređaj i sve komponente iz ambalaže.

Koraci instalacije:

1. Pričvrstite montažni nosač: Secure the mounting bracket (included) to the electrical junction box in the ceiling using the provided screws. Ensure it is firmly attached.
2. Spojite električne žice:
   • Spojite crna (hot) wire from the ceiling to the crna wire of the fixture using a wire nut.
   • Spojite bijela (neutral) wire from the ceiling to the bijela wire of the fixture using a wire nut.
   • Spojite tlo wire (bare copper or green) from the ceiling to the tlo wire of the fixture (or the ground screw on the mounting bracket) using a wire nut or by wrapping it securely around the screw.
   Ensure all connections are tight and secure. Wrap electrical tape around wire nuts for added insulation.
3. Pričvrstite učvršćivač na nosač za montažu: Carefully push the wired fixture up towards the ceiling, aligning the holes in the fixture base with the screws on the mounting bracket. Secure the fixture in place with the decorative nuts or screws provided.
4. Postavite žarulje: Insert the recommended A15 shape, E-26 medium base light bulbs (not included) into the sockets. Do not exceed 14 Watts per bulb.
5. Pričvrstite stakleno sjenilo: Carefully place the alabaster glass shade onto the fixture. Secure it in place using the finial or retaining ring provided, tightening it gently until snug. Do not overtighten.
6. Vrati snagu: Nakon što je instalacija dovršena i svi priključci su sigurni, vratite napajanje na prekidaču.

6. Upute za rad

Once the Project Source Flush Mount Light fixtures are correctly installed and power is restored, they can be operated using the standard wall switch connected to the circuit. Simply toggle the wall switch to turn the lights on or off.

7. Njega i održavanje

Regular cleaning will help maintain the appearance and performance of your light fixtures.

• Čišćenje uređaja: Dust the bronze finish regularly with a soft, dry cloth. For more thorough cleaning, wipe the bronze finish with a damp cloth and a mild, non-abrasive soap solution, then dry immediately with a clean, soft cloth to prevent water spots.
• Cleaning the Glass Shade: The alabaster glass shade can be removed for cleaning. Wash it with mild soap and water, then rinse thoroughly and dry completely before reattaching to the fixture.
• Zamjena žarulje: Always ensure the power is turned off at the circuit breaker and the bulbs have cooled down before attempting to replace them. Use only bulbs that meet the specified wattage i osnovni tip.
• Do not use abrasive cleaners, solvents, or polishes on any part of the fixture, as they may damage the finish or glass.

8. Rješavanje problema

Ako naiđete na probleme sa svojom rasvjetnom tijelom, pogledajte sljedeće uobičajene probleme i rješenja:

• Svjetlo se ne pali:
  • Check that the power supply is on at the circuit breaker.
  • Ensure the light bulbs are correctly installed and are not burnt out. Try replacing with a known working bulb.
  • Verify that all wire connections (black to black, white to white, ground) are secure and properly connected.
• Treperenje svjetla:
  • Ensure the light bulbs are fully tightened in their sockets.
  • Check for any loose wire connections within the fixture or junction box.
  • Confirm that the bulbs used are compatible with the fixture and are not exceeding the maximum wattage.
• Glass shade is loose or wobbles:
  • Gently tighten the finial or retaining ring that secures the glass shade. Do not overtighten.

If the problem persists after attempting these solutions, please consult a qualified electrician or contact customer support.

9. Jamstvo i korisnička podrška

For detailed warranty information regarding your Project Source 2-Pack 13-in W Bronze Flush Mount Light, please refer to the documentation included with your original purchase. Warranty terms typically cover defects in materials and workmanship for a specified period.

If you require technical assistance, have questions about installation, or need to report a defect, please contact Project Source customer service directly through their official website or the contact information provided in your product packaging. Please have your model number (40804) and purchase details ready when contacting support.