Lenco L-30BK Belt Drive Turntable Instruction Manual

1. Uvod

This manual provides essential information for the safe and efficient operation of your Lenco L-30BK Belt Drive Turntable. Please read these instructions thoroughly before using the device and retain them for future reference. The Lenco L-30BK is designed for playing vinyl records at 33 and 45 RPM, featuring a built-in preamplifier and USB connectivity for digitizing your vinyl collection.

2. Sigurnosne informacije

• Izvor napajanja: Provjerite je li napajanje voltage matches the requirements specified on the unit. Use only the provided power adapter.
• Voda i vlaga: Ne izlažite uređaj kiši, vlazi ili kapanju/prskanju tekućina. Ne stavljajte predmete napunjene tekućinama, poput vaza, na uređaj.
• Ventilacija: Osigurajte odgovarajuću ventilaciju. Ne blokirajte ventilacijske otvore.
• toplina: Držite uređaj dalje od izvora topline kao što su radijatori, grijalice, peći ili drugi uređaji (uključujući amplifiers) koji proizvode toplinu.
• Čišćenje: Prije čišćenja isključite uređaj iz zidne utičnice. Koristite meku, suhu krpu. Nemojte koristiti tekuća sredstva za čišćenje ili aerosolna sredstva za čišćenje.
• Servisiranje: Ne pokušavajte sami servisirati ovaj proizvod. Sve servise prepustite kvalificiranom servisnom osoblju.
• Plasman: Place the turntable on a stable, level surface to prevent vibrations and ensure proper playback.

3. Sadržaj paketa

Please check that all items listed below are included in the package:

• Lenco L-30BK Turntable Unit
• Poklopac za prašinu
• Pladanj
• Pogonski remen
• Slipmat
• AC adapter za napajanje
• USB kabel
• RCA audio kabel
• Priručnik s uputama
• Pick-up Needle (pre-installed on cartridge)

4. Proizvod je gotovview

Familiarize yourself with the components of your Lenco L-30BK turntable.

Slika 4.1: Ispred view of the Lenco L-30BK Turntable with the dust cover open, revealing the main components including the platter, tonearm, and control buttons.

Slika 4.2: Rear panel connections of the Lenco L-30BK, including RCA audio outputs (L/R), USB port, DC12V power input, and the main power switch.

Ključne komponente:

• Pladanj: The circular platform where records are placed.
• Tonerarm: Holds the cartridge and stylus, which reads the grooves of the record.
• Cartridge and Stylus: Converts physical vibrations into electrical signals. The L-30BK features a Movable Magnet Sensor (MMC) with an individually replaceable stylus.
• Birač brzine: Switch to select between 33 and 45 RPM playback speeds.
• Automatsko isključivanje: Automatically stops the platter rotation at the end of a record.
• Poklopac za prašinu: Štiti gramofon od prašine kada se ne koristi.
• RCA Audio Outputs (L/R): Za spajanje na vanjski amplifier ili aktivni zvučnici.
• USB priključak: For connecting to a computer to digitize vinyl records.
• Ulazno napajanje DC12V: Za spajanje strujnog adaptera.

5. Postavljanje

5.1 Raspakiranje i postavljanje

1. Pažljivo izvadite gramofon iz ambalaže.
2. Place the unit on a stable, level surface, away from direct sunlight, heat sources, and excessive dust or vibrations.
3. Install the dust cover by aligning its hinges with the slots on the back of the turntable.

Slika 5.1: The Lenco L-30BK Turntable with its protective dust cover closed, ready for placement.

5.2 Platter and Belt Installation

1. Place the platter onto the turntable spindle.
2. Locate the drive belt, typically found underneath the platter or separately packaged.
3. Carefully stretch the drive belt around the motor pulley and the inner rim of the platter. Ensure the belt is not twisted.
4. Place the slipmat on top of the platter.

5.3 Audio veza

The L-30BK has a built-in preamplifier, allowing direct connection to most audio systems.

• Connect the RCA audio cable (red for right channel, white for left channel) from the AUDIO OUT jacks on the rear of the turntable to the LINE IN or AUX IN jacks on your amplifier ili aktivni zvučnici.

5.4 Priključak za napajanje

• Connect the DC12V power adapter to the DC12V POWER input on the rear of the turntable.
• Uključite adapter za napajanje u odgovarajuću zidnu utičnicu.

5.5 USB Connection (for Digitization)

• To digitize your vinyl records, connect the USB cable from the USB port on the rear of the turntable to an available USB port on your computer (PC or Mac).

6. Upute za rad

6.1 Uključivanje/isključivanje

• Flip the ON/OFF switch on the rear panel to the 'ON' position to power on the turntable.
• Flip the switch to 'OFF' when not in use.

6.2 Reprodukcija ploče

1. Stavite ploču na pladanj, pazeći da bude centrirana.
2. Select the appropriate speed (33 or 45 RPM) using the speed selector switch. For 45 RPM singles, place the included adapter on the spindle if needed.
3. Podignite ručicu tona pomoću poluge za podešavanje zvuka.
4. Manually position the tonearm over the desired starting groove of the record.
5. Gently lower the tonearm using the cueing lever. The stylus will descend onto the record, and playback will begin.
6. At the end of the record, the auto shut-off function will stop the platter rotation. Lift the tonearm and return it to its rest.

Slika 6.1: Proper technique for lowering the tonearm onto a record for playback.

Slika 6.2: Detaljan view of the Movable Magnet Sensor (MMC) cartridge and stylus assembly.

6.3 Digitizing Records via USB

The L-30BK allows you to convert your vinyl records into digital audio filekoristi računalo.

1. Spojite gramofon s računalom pomoću priloženog USB kabela.
2. Download and install audio recording software such as Audacity (available online for free) on your computer.
3. Open the recording software and select the USB Audio Device as the input source.
4. Start recording in the software, then begin playing your record on the turntable as described in section 6.2.
5. Once the record finishes, stop the recording in the software and save your digitized audio file.

7. Održavanje

7.1 Čišćenje gramofona

• Prije čišćenja uvijek isključite gramofon iz električne utičnice.
• Use a soft, dry, lint-free cloth to wipe the cabinet and dust cover.
• Ne koristite abrazivna sredstva za čišćenje, voskove ili otapala jer mogu oštetiti završnu obradu.

7.2 Briga o olovci i njezina zamjena

• The stylus is a delicate component. Avoid touching it with your fingers.
• Clean the stylus regularly using a soft brush, gently brushing from back to front.
• The stylus should be replaced after approximately 300-500 hours of playback, or if you notice a degradation in sound quality.
• To replace the stylus, carefully pull the old stylus assembly forward and down from the cartridge. Insert the new stylus assembly by pushing it upwards and backwards into the cartridge until it clicks into place.

8. Rješavanje problema

If you encounter problems with your turntable, refer to the following common issues and solutions:

9. Specifikacije

10. Jamstvo i podrška

Lenco products are manufactured to high quality standards. In the event of a defect, your product is covered by the terms of the warranty in your country of purchase. For detailed warranty information, please refer to the warranty card included with your product or visit the official Lenco website. For technical support or service inquiries, please contact Lenco customer service through their official channels.