Adler AD 1186 LED sat s termometrom - korisnički priručnik

Uvod

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Adler AD 1186 LED Clock with Thermometer. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Sigurnosne upute

• Osigurajte da je uređaj postavljen na stabilnu, ravnu površinu.
• Ne izlažite uređaj ekstremnim temperaturama, izravnoj sunčevoj svjetlosti ili visokoj vlažnosti.
• Držite uređaj dalje od vode ili drugih tekućina.
• Koristite samo navedeni adapter za napajanje.
• Ne pokušavajte sami rastavljati ili popravljati uređaj. Za pomoć se obratite kvalificiranom servisnom osoblju.
• Čuvati izvan dohvata djece.

Sadržaj paketa

Molimo provjerite paket za sljedeće stavke:

• Adler AD 1186 LED Clock with Thermometer
• Adapter napajanja
• Korisnički priručnik (ovaj dokument)

Proizvod gotovview

Familiarize yourself with the components of your Adler AD 1186 LED Clock.

Slika 1: Prednja strana View. This image shows the front of the Adler AD 1186 LED Clock. The large LED display clearly shows the time (e.g., 20:18), humidity percentage (e.g., 30% RH), and temperature in Celsius (e.g., 21°C). The Adler logo is visible below the time display.

Slika 2: Kontrole na gornjoj ploči. This image provides a top-down angled view of the clock, highlighting the control buttons. From left to right, buttons include "SETTING", "TIME", "DATE", "ALARM", "SNOOZE" (large central button), "UP", "DOWN", and "DATE". These buttons are used for configuring the clock's various functions.

Slika 3: Stražnja ploča. This image displays the back of the Adler AD 1186 LED Clock. It shows the power input port for the adapter and a compartment for battery backup, ensuring timekeeping during power outages.

Ključne komponente:

• LED zaslon: Shows time, temperature, and humidity.
• Kontrolni gumbi: Located on the top panel for setting time, date, alarm, and adjusting settings.
• Ulazna snaga: Za spajanje AC adaptera.
• Odjeljak za baterije: For backup batteries (type not specified, typically AAA or button cell).

Postavljanje

1. Raspakirati: Carefully remove the clock and all accessories from the packaging.
2. Priključak za napajanje: Connect the provided power adapter to the DC input port on the back of the clock (refer to Figure 3). Plug the adapter into a standard electrical outlet. The LED display should illuminate.
3. Rezervna baterija (opcionalno, ali preporučeno): Open the battery compartment on the rear of the clock. Insert the required backup batteries (e.g., 2x AAA, not included) according to the polarity markings. This will maintain time settings during power interruptions.

Upute za rad

1. Postavljanje vremena i datuma

1. Pritisnite tipku VRIJEME button (refer to Figure 2). The hour digits will start flashing.
2. Koristite UP i DOLJE tipke za podešavanje sata.
3. Pritisnite VRIJEME again to confirm the hour and move to minute adjustment. The minute digits will flash.
4. Koristite UP i DOLJE tipke za podešavanje minuta.
5. Pritisnite VRIJEME ponovo za potvrdu minuta.
6. Za postavljanje datuma pritisnite tipku DATUM button. The year will flash.
7. Koristiti UP i DOLJE to set the year, then press DATUM to move to month, and then day.
8. Pritisnite DATUM again to exit date setting mode.

2. Postavljanje alarma

1. Pritisnite tipku ALARM button (refer to Figure 2). The alarm hour digits will flash.
2. Koristite UP i DOLJE tipke za postavljanje željenog sata alarma.
3. Pritisnite ALARM again to confirm the hour and move to minute adjustment. The alarm minute digits will flash.
4. Koristite UP i DOLJE tipke za postavljanje željenih minuta alarma.
5. Pritisnite ALARM ponovno za aktiviranje alarma. Na zaslonu će se pojaviti ikona alarma.
6. Za deaktiviranje alarma pritisnite tipku ALARM gumb dok ikona alarma ne nestane.

3. Funkcija odgode alarma

Kada se oglasi alarm, pritisnite veliki DRIJEMEŽ button (refer to Figure 2) to temporarily silence the alarm. The alarm will sound again after a few minutes (default snooze time is typically 5-9 minutes, refer to specific product details if available).

4. Podešavanje svjetline

The clock features 2 brightness levels. Press the POSTAVKA button (or a dedicated brightness button if present, otherwise cycle through settings) to cycle between the brightness levels. Adjust to your preferred visibility.

5. Prikaz temperature i vlažnosti

The clock automatically displays the current room temperature and humidity. No special setting is required for this function. The temperature is displayed in Celsius (°C) and humidity as a percentage (% relativne vlažnosti).

Održavanje

• Čišćenje: Use a soft, dry cloth to clean the surface of the clock. Do not use abrasive cleaners or solvents.
• Prah: Regularly dust the device to prevent accumulation, especially around vents if any.
• Zamjena baterije: If using battery backup, replace batteries annually or when the display shows signs of dimming during power outages.

Rješavanje problema

Tehnički podaci

Jamstvo i podrška

Adler products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your purchase or visit the official Adler website. For technical support or service inquiries, please contact Adler customer service through their official channels.

Zadržite svoj dokaz o kupnji za jamstvene zahtjeve.