Perel AC028

Perel AC028 Intelligent Charger for 12V Lead-Acid Batteries - 1.5A User Manual

Uvod

This manual provides essential instructions for the safe and efficient use of the Perel AC028 Intelligent Charger. This device is specifically designed for charging 12V lead-acid batteries, including Gel, AGM, and EFB types, utilizing a sophisticated 3-stage automatic charging cycle to optimize battery life and performance.

Sigurnosne upute

Always read and understand all safety warnings and instructions before operating the charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • This charger is intended for 12V lead-acid batteries (Gel, AGM, EFB) only. Do not use with other battery types.
  • Battery charging can produce explosive gases. Ensure adequate ventilation during charging and keep away from flames, sparks, and smoking materials.
  • Uvijek isključite punjač iz električne mreže prije spajanja ili prekidanja priključaka na bateriju.
  • Avoid charging a frozen battery. Allow it to thaw before attempting to charge.
  • Punjač i bateriju držite izvan dohvata djece i kućnih ljubimaca.
  • Do not expose the charger to rain or excessive moisture. The unit has an IP65 rating, meaning it is protected against dust and low-pressure water jets, but it is not submersible.
  • Ako je kabel za napajanje oštećen, mora ga zamijeniti proizvođač, njegov serviser ili slično kvalificirana osoba kako bi se izbjegla opasnost.

Značajke proizvoda

  • 3-Stage Automatic Charging Cycle: Ensures optimal charging and extends battery life.
  • Kompatibilnost baterije: Designed for 12V lead-acid batteries, including Gel, AGM, and EFB types.
  • Nazivni toplinski učin: 12 VDC, 1.5 A.
  • IP65 Klasa zaštite: Provides protection against dust ingress and low-pressure water jets from any direction.
  • Kompaktan dizajn: Jednostavan za skladištenje i transport.

Tehnički podaci

ModelAC028
Ulazni voltage220-240 VAC
Frekvencija50/60 Hz
Izlazni voltage12 VDC
Izlazna struja1.5 A
Nazivna struja0.25 A
Dimenzije (D x Š x V)147 x 72 x 42 mm
Težina376 ​​g
IP klasa zaštiteIP65
Kompatibilne vrste baterija12V Lead-Acid (Gel, AGM, EFB)
Main Cable Length1.5 m
Duljina kabela za punjenje1 m

Postavljanje

  1. Ensure the Perel AC028 charger is disconnected from the mains power outlet.
  2. Spojite crveni (+) clamp of the charger to the positive (+) terminal of the 12V lead-acid battery.
  3. Spojite crni (-) clamp of the charger to the negative (-) terminal of the 12V lead-acid battery.
  4. Verify that both connections are secure and properly seated to prevent arcing or poor contact.
  5. Plug the charger's main power cable into a suitable 220-240 VAC, 50/60 Hz mains power outlet.
Perel AC028 charger connected to a car battery
Image: The Perel AC028 charger connected to a car battery, demonstrating proper clamp privitak.

Upute za rad

Once connected to the battery and mains power, the charger will automatically initiate its 3-stage proces punjenja.

  • Indikator napajanja: The 'POWER' LED will illuminate when the charger is connected to the mains power supply.
  • Indikator punjenja: The 'CHARGING' LED will illuminate when the battery is actively being charged.
  • Puni indikator: The 'FULL' LED will illuminate when the battery has reached a full charge. At this point, the charger will switch to a maintenance mode to prevent overcharging.

The charger can remain connected to the battery for extended periods for maintenance charging, ensuring the battery remains at an optimal charge level.

Ispred view of Perel AC028 charger showing Power, Charging, and Full indicator lights
Image: Front panel of the Perel AC028 charger displaying the 'POWER', 'CHARGING', and 'FULL' indicator lights.

Održavanje

  • Regularly inspect the charger's cables, clamps i casing for any signs of damage, wear, or corrosion. Do not use the charger if any part is damaged.
  • Keep the charger clean and free from dust and debris. Use a dry cloth for cleaning. Do not use solvents or abrasive cleaners.
  • Store the charger in a cool, dry, and well-ventilated area when not in use.
  • Ensure the battery terminals are clean before connecting the charger for optimal contact.

Rješavanje problema

The Perel AC028 charger is equipped with error indicators to help diagnose common issues:

Šifra greškeOpisAkcijski
F01Short circuit / Reverse connection / No connectionCheck battery connections for correct polarity (+ to +, - to -). Ensure clamps are securely attached and there is no short circuit.
F02Labav spojProvjerite je li baterijaamps are tightly connected to the battery terminals.
F03Baterija voltage previsokoThis charger is for 12V batteries. Ensure you are not attempting to charge a battery with a higher nominal voltage.
F04Loša baterijaThe battery may be severely discharged, damaged, or at the end of its life. It might not be able to accept a charge. Consult a battery specialist.
Nazad view of Perel AC028 charger showing specifications and error codes
Image: Rear label of the Perel AC028 charger detailing technical specifications and error code explanations.

Jamstvo i podrška

For detailed warranty information, terms, and conditions, please refer to the documentation provided with your purchase or visit the official Perel website. For technical support or service inquiries, contact your retailer or the manufacturer's customer service department.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.