StarTech.com RKCONS1901

StarTech.com RKCONS1901 1U Rackmount KVM Console User Manual

Model: RKCONS1901 | Marka: Startech.com

1. Uvod

The StarTech.com RKCONS1901 is a 1U rack-mount KVM console designed to provide complete keyboard, monitor, and mouse control for a single server or multiple servers when connected through a separate KVM switch (sold separately). This space-efficient solution features a built-in 19-inch LCD display, a full keyboard, and a touchpad, all housed within a durable steel drawer that slides into 1U of rack space.

2. Što je u kutiji

  • KVM konzola
  • 6 ft [1.8 m] KVM cable
  • M5 kavezne matice
  • M5 vijci

3. Postavljanje i instalacija

Follow these steps to properly install your StarTech.com RKCONS1901 KVM Console into a server rack and connect it to your equipment.

3.1 Montaža u stalak

The KVM console is designed to fit into a standard 1U rack space. Ensure your rack has sufficient depth and mounting points.

  1. Slide the KVM console into the desired 1U rack space.
  2. Secure the console to the rack using the provided M5 cage nuts and M5 screws. Ensure both sides are firmly attached to prevent movement.
StarTech.com RKCONS1901 KVM Console in closed position, ready for rack mounting.

Figure 1: KVM Console in closed position, ready for rack mounting.

3.2 Spojni kabeli

Connect the necessary cables to the rear of the KVM console and your server or KVM switch.

  1. Connect the provided 6 ft [1.8 m] KVM cable to the single port on the rear of the KVM console.
  2. Connect the other end of the KVM cable to the VGA and USB ports of your server or KVM switch.
  3. Connect the power cable to the KVM console and a power outlet.
Stražnji view of the StarTech.com RKCONS1901 KVM Console showing VGA, USB, and power ports.

Slika 2: Stražnji dio view of the KVM Console with connection ports.

3.3 Installation Video Reference

For a visual guide on the installation process, refer to the following video:

Video 1: This video demonstrates the installation of a 19-inch Rack Mount VGA KVM Console into a server rack, showing the physical mounting and initial setup steps.

4. Upute za rad

Once installed and connected, the KVM console is ready for operation.

4.1 Opening and Closing the Console

  1. To open the console, pull the handle to slide the drawer out of the rack.
  2. Lift the LCD panel to an upright position.
  3. To close, fold down the LCD panel and push the drawer back into the rack until it locks securely.
StarTech.com RKCONS1901 KVM Console in open position, showing the 19-inch LCD monitor, keyboard, and touchpad.

Figure 3: KVM Console in open position, ready for use.

4.2 Korištenje tipkovnice i dodirne podloge

The integrated keyboard features 99 keys, including a numeric keypad, and the touchpad provides intuitive cursor control.

4.3 Navigacija kroz OSD izbornik

The On-Screen Display (OSD) menu allows you to adjust monitor settings such as brightness, contrast, and color. Use the buttons located below the LCD panel to navigate the OSD menu.

Video 2: This video provides an introduction to a rack mount KVM monitor switch, demonstrating its basic operation, OSD menu navigation, and switching capabilities.

5. Održavanje

To ensure the longevity and optimal performance of your KVM console, follow these maintenance guidelines:

  • Čišćenje: Use a soft, lint-free cloth to clean the LCD screen and exterior surfaces. For stubborn marks, dampen the cloth with a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the console.
  • Ventilacija: Ensure proper airflow around the console. Do not block ventilation openings.
  • Uprava za kabele: Keep cables neatly organized to prevent damage and ensure smooth operation of the sliding drawer.
  • Uvjeti okoliša: Operate the console within the specified temperature range of 0 to 40 degrees Celsius.

6. Rješavanje problema

If you encounter issues with your KVM console, refer to the following common troubleshooting steps:

  • Nema zaslona: Check all video cable connections. Ensure the server or KVM switch is powered on and outputting a video signal. Verify the console's power adapter is securely connected.
  • Tipkovnica/miš ne reagira: Check all USB cable connections. Ensure the server or KVM switch recognizes the USB devices. Try connecting the KVM cable to a different USB port on the server/switch.
  • Console Not Sliding Smoothly: Inspect the slide rails for any obstructions or damage. Ensure the rack mounting screws are not overtightened, which could impede movement.
  • Incorrect Display Resolution: Access the OSD menu to adjust display settings. Ensure your server's video output is configured to a resolution supported by the 19-inch LCD (up to 1280x1024).

7. Specifikacije

ZnačajkaSpecifikacija
Broj modelaRKCONS1901
MarkaStartech.com
Visina stalka1U
Veličina zaslona19 inča
Vrsta zaslonaActive Matrix TFT LCD
Maksimalna razlučivost1280x1024
Tipkovnica99-key full keyboard with numeric keypad
Pokazivački uređajTouchpad
Video sučeljeVGA
USB podrškaDa
Radna temperatura0 do 40 stupnjeva Celzija
MTBF50,000 sata
Dimenzije proizvoda (DxŠxV)21 x 19 x 1.7 inča
Težina artikla26.8 funti

8. Jamstvo i podrška

The StarTech.com RKCONS1901 is backed by a StarTech.com warranty. For specific warranty details and technical support, please refer to the official StarTech.com webweb-mjesto ili se izravno obratite njihovoj korisničkoj službi. Sačuvajte račun za slučaj reklamacije.

© 2026 StarTech.com. Sva prava pridržana.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.