Uvod
The Amazon Basics 4K HDMI 3 Port Switch allows you to connect up to three HDMI source devices to a single HDMI display, such as a TV or projector. This device is ideal for expanding the HDMI input capabilities of your display, enabling seamless switching between various entertainment or work devices. It supports 4K resolution at 30Hz and is HDCP compliant, ensuring compatibility with a wide range of modern equipment.
Sigurnosne informacije
- Pažljivo pročitajte sve upute prije uporabe.
- Ne izlažite uređaj vlazi, ekstremnim temperaturama ili izravnoj sunčevoj svjetlosti.
- Use only the provided USB power cable.
- Čuvati izvan dohvata djece.
- Ne pokušavajte sami rastavljati ili popravljati uređaj. Po potrebi se obratite kvalificiranom servisnom osoblju.
Sadržaj paketa
Provjerite jesu li svi artikli prisutni u paketu:
- Amazon Basics 4K HDMI 3 Port Switch
- USB Power Cable (for optional power)
- Remote Control (CR2025 battery not included)
Image: The HDMI switch, its remote control, and the USB power cable included in the package.
Proizvod gotovview
The HDMI switch features three input ports and one output port, along with a power input and an IR receiver for the remote control.
Slika: Detaljna view of the HDMI switch, highlighting the three HDMI input ports (INPUT1, INPUT2, INPUT3), one HDMI output port (OUTPUT), and the DC 5V power input.
Prednja ploča
- LED za napajanje: Označava status napajanja.
- LED1/LED2/LED3: Indicate which HDMI input is currently active.
- SELECTION Button: Manually switch between HDMI inputs.
- IR prijemnik: Prima signale s daljinskog upravljača.
Stražnja ploča
- HDMI INPUT 1/2/3: Connect your source devices (e.g., game console, Blu-ray player, computer).
- HDMI IZLAZ: Connect to your display device (e.g., TV, projector, monitor).
- DC 5 V: Power input port (optional for some setups, required for 4K resolution or longer cables).
Postavljanje
Follow these steps to connect your HDMI switch:
- Povežite izvorne uređaje: Plug your HDMI source devices (e.g., gaming console, media player, computer) into the HDMI INPUT 1, 2, and 3 ports on the switch using HDMI cables (sold separately).
- Connect Display Device: Connect your TV, monitor, or projector to the HDMI OUTPUT port on the switch using an HDMI cable (sold separately).
- Priključak za napajanje (opcionalno/preporučeno): Insert the small end of the included USB power cable into the DC 5V port on the switch. Plug the USB-A end into a USB power adapter (not included) or a USB port on your TV/computer. While the switch can draw power from HDMI sources, connecting the USB power cable is recommended for stable performance, especially with 4K resolutions or longer HDMI cables.
- Uključivanje: Ensure all connected devices and the display are powered on. The switch will automatically detect the active input or you can select it manually.
Image: The HDMI switch connected to a laptop via an HDMI input, with the output connected to a display (not fully visible). This illustrates a typical setup.
Operativni
The HDMI switch offers two methods for selecting inputs:
Automatsko prebacivanje
The switch is designed to automatically detect and switch to a newly activated HDMI source. If multiple sources are active, it will typically prioritize the lowest numbered input (Input 1, then Input 2, etc.) or the last active input.
Ručno prebacivanje
- Using the SELECTION Button: Press the 'SELECTION' button on the front panel of the switch to cycle through the available HDMI inputs (Input 1 → Input 2 → Input 3 → Input 1...). The corresponding LED will illuminate to indicate the active input.
- Korištenje daljinskog upravljača: Point the remote control towards the IR receiver on the front of the switch. Press the desired input number button (1, 2, or 3) to switch directly to that input. Ensure a CR2025 battery is installed in the remote control.
Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| No picture/signal on display. |
|
|
| Picture flickers or drops out. |
|
|
| Daljinski upravljač ne radi. |
|
|
| Automatic switching not working as expected. | Some devices maintain an active signal even when off, preventing auto-switching. | Use manual switching via the button on the switch or the remote control. |
Tehnički podaci
| Značajka | Detalj |
|---|---|
| Broj modela | AZSW3T1A-4K2K |
| HDMI verzija | HDMI 1.4 (Supports 4K@30Hz) |
| HDCP usklađenost | HDCP 1.4 |
| Ulazni priključci | 3 x HDMI |
| Izlazni priključci | 1 x HDMI |
| Podržane rezolucije | Up to 4K (3840x2160) @ 30Hz, 1080p, 720p, etc. |
| Audio podrška | Podržava različite audio formate |
| Napajanje | DC 5V via USB (optional, USB cable included) |
| Metode kontrole | Manual button, IR remote control |
| Dimenzije (D x Š x V) | 4.49 x 0.79 x 2.8 inča (11.4 x 2.0 x 7.1 cm) |
| Težina | 6.9 unci (195.6 grama) |
Održavanje
- Uređaj čistite mekom, suhom krpom. Nemojte koristiti tekuća sredstva za čišćenje ili aerosole.
- Keep the device free from dust and debris to ensure proper ventilation.
- Čuvajte na hladnom i suhom mjestu ako se ne koristi dulje vrijeme.
Jamstvo i podrška
Za informacije o jamstvu i korisničku podršku obratite se službenoj web stranici Amazon Basicsa. webweb-mjesto ili izravno kontaktirajte korisničku službu Amazona. Sačuvajte račun za slučaj reklamacije.