Legrand 1597TRW Tamper Resistant GFCI Wall Outlet User Manual

Uvod

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This device is part of the radiant collection, designed to offer reliable electrical protection in residential and commercial environments. Please read these instructions thoroughly before beginning installation or use.

Sigurnosne informacije

WARNING: Risk of electric shock. May cause serious injury or death. Turn off power at the circuit breaker or fuse box before installation.

Always disconnect power at the service panel before working with electrical wiring.
Installation must be performed by a qualified electrician or in accordance with all local and national electrical codes.
Ne postavljajte na vlažna mjesta osim ako nije posebno namijenjeno za takvu upotrebu.
Provjerite jesu li svi spojevi žica sigurni i pravilno izolirani.
Test the GFCI outlet monthly to ensure proper operation.

Sadržaj paketa

Prije početka instalacije provjerite jesu li sve komponente prisutne:

Legrand 1597TRW Tamper Resistant GFCI Wall Outlet (White)
Montažni vijci
Upute za uporabu (ovaj dokument)

Note: A screwless wall plate is not included and must be purchased separately.

Montaža

Follow these steps for proper installation of your GFCI outlet:

Isključite napajanje: Locate the circuit breaker or fuse that supplies power to the outlet box. Turn it off completely. Verify power is off using a voltage tester.
Ukloni staru utičnicu: Carefully remove the existing wall plate and outlet from the electrical box. Disconnect the wires from the old outlet, noting which wires were connected to the "LINE" and "LOAD" terminals.
Identificirajte žice:
- LINIJSKE žice: These wires bring power from the circuit breaker to the GFCI outlet.
- Žice za opterećenje: These wires carry power from the GFCI outlet to other downstream receptacles or devices that you want to protect. If there are no downstream receptacles, cap the LOAD wires individually.
- Podna žica: Typically bare copper or green insulated.
Connect Wires to GFCI:
- Spojite LINIJA wires to the terminals marked "LINE" on the GFCI outlet.
- Spojite OPTEREĆENJE wires to the terminals marked "LOAD" on the GFCI outlet.
- Spojite žica za uzemljenje to the green ground screw.
Važno: The Legrand 1597TRW features a feed-thru wiring configuration that allows the GFCI to protect downstream receptacles. It also prevents line-load reversal miswire, meaning there will be no power to the face or downstream receptacles if wired incorrectly. An auto-ground clip assures a positive ground to a metal box.
Mount the Outlet: Carefully fold the wires into the electrical box and secure the GFCI outlet to the box using the provided mounting screws.
Postavite zidnu ploču: Attach the screwless wall plate (not included) over the GFCI outlet.
Vrati snagu: Ponovno uključite napajanje na prekidaču.

Slika: prednja strana view of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This image shows the two tamper-resistant receptacles, the TEST button (black), and the RESET button (red).

Operacija

The GFCI outlet is designed to protect against electrical shock by quickly shutting off power if a ground fault is detected.

Gumb RESET: Nakon instalacije ili nestanka strujetage, press the red RESET button to restore power to the outlet.
Gumb TEST: Press the black TEST button to simulate a ground fault. The GFCI should trip, and power to the outlet will be cut off. This confirms the GFCI is functioning correctly.

Mjesečno testiranje:

It is recommended to test your GFCI outlet monthly to ensure it is providing continuous protection. To test:

Utikač alamp or other device into the GFCI outlet and turn it on.
Press the black TEST button. The lamp should turn off, and the red RESET button should pop out.
Press the red RESET button. The lamp trebao bi se ponovno uključiti.
Ako je lamp ne isključuje se ili ne uključuje kako je opisano, GFCI sklopka možda je neispravna i treba je zamijeniti.

Održavanje

The Legrand 1597TRW GFCI outlet requires minimal maintenance. Regular testing is the primary maintenance procedure.

Keep the outlet clean and free from dust and debris.
Do not paint over the GFCI outlet or its buttons, as this can impair operation.
If the GFCI trips frequently without an apparent cause, consult a qualified electrician to inspect your wiring.

Rješavanje problema

Problem	Mogući uzrok	Otopina
GFCI se neće resetirati.	Nema napajanja za GFCI. Otkriven je uzemljeni spoj. Line-load reversal miswire. Faulty GFCI.	Provjerite prekidač. Unplug all devices from the GFCI and downstream outlets. Try to reset. If it resets, plug devices back in one by one to identify the faulty device. Verify wiring connections (LINE to LINE, LOAD to LOAD). Zamijenite GFCI.
GFCI se često isključuje.	Faulty appliance/device. Moisture in the circuit. Oštećeno ožičenje.	Identify and remove the faulty appliance. Ensure the environment is dry. Consult a qualified electrician to inspect wiring.
Nema struje u utičnici.	GFCI se isključio. Prekinuo se prekidač. Neispravno ožičenje.	Pritisnite tipku RESET. Provjerite i ponovno postavite prekidač. Provjerite spojeve ožičenja.

Tehnički podaci

Model: 1597TRW
Marka: Legrand
Boja: Bijela
Ampdoba: 15 Amps
Voltage: 125 volti
Ukupna snaga utičnica: 2
Vrsta priključka: Nema 5-15
Materijal: Metal
Značajke: Tamper Resistant, Auto-Ground Clip, Feed-Thru Wiring, Line-Load Reversal Miswire Prevention
UPC: 680147085438
ASIN: B079LTP7Y5

Jamstvo i podrška

Legrand products are designed and manufactured to the highest quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Legrand website. For technical support or further assistance, please contact Legrand customer service.

Contact information for Legrand can typically be found on their official webmjesto ili pakiranje proizvoda.

	Ugradnja i testiranje GFCI utičnice: Vodič tvrtke Pass & Seymour (Legrand) Comprehensive guide on how to install and test a Pass & Seymour Self-Test GFCI Receptacle with SafeLock Protection. Learn about GFCI functionality, wiring, testing procedures, and troubleshooting. Includes product features and warranty information.
	Legrand vodič za ugradnju utičnice za kuhinjsku radnu ploču Upute za ugradnju i detalji o proizvodu za Legrand kuhinjsku utičnicu za radnu površinu (modeli CP498TR15, CP498TR20, CP498L). Sadrži sigurnosna upozorenja, specifikacije proizvoda, uključujući vodootpornost i kompatibilnost s GFCI-jem, te detaljne vodiče za ugradnju kuhinjskih otoka i poluotoka. Uključuje informacije o jamstvu.
	Legrand CP498TR Vodič za ugradnju utičnice za kuhinjsku radnu ploču Detaljan vodič za ugradnju i informacije o proizvodu za Legrand CP498TR seriju utičnica za kuhinjsku i kupaonsku upotrebu. Uključuje sigurnosna upozorenja, značajke proizvoda i detalje o jamstvu.
	Legrand 2P+E Schuko utičnice s kontrolom rasvjete - Tehnički podaci Tehničke specifikacije i podaci za Legrandove nadžbukne 2P+E Schuko utičnice, dizajnirane za upravljanje rasvjetom. Uključuje detalje o zaštiti, materijalima, električnim karakteristikama, dimenzijama i standardima.
	Legrand CP498TR Vodič za ugradnju kuhinjske utičnice Detaljne upute za ugradnju Legrand CP498TR kuhinjske utičnice, uključujući ožičenje, montažu i informacije o jamstvu.
	Installing and Testing a GFCI Receptacle - Legrand Pass & Seymour Installation Guide Detailed instructions for installing and testing a Legrand Pass & Seymour GFCI receptacle, covering wiring, features, safety precautions, and troubleshooting. Learn how to ensure proper GFCI protection in your electrical system.

Legrand 1597TRW