Einhell TC-TC 800 Tile Cutter Instruction Manual

1. Proizvod je gotovview

The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.

Ključne karakteristike:

• Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
• Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
• Integrirani spremnik za vodu: Provides necessary water cooling for the saw blade, protecting it from heat damage.
• Kapacitet rezanja: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
• Zaštita: A protective guard for the cutting disc ensures user safety from chips and dust.

2. Sigurnosne upute

Uvijek pročitajte i razumite sva sigurnosna upozorenja, upute, ilustracije i specifikacije koje ste dobili s ovim električnim alatom. Nepoštivanje svih dolje navedenih uputa može rezultirati strujnim udarom, požarom i/ili ozbiljnim ozljedama.

Opća sigurnosna upozorenja:

• Nosite odgovarajuću osobnu zaštitnu opremu (OZO), uključujući zaštitne naočale, zaštitu za sluh i rukavice.
• Osigurajte da je radno područje čisto, dobro osvijetljeno i bez prepreka.
• Držite djecu i promatrače podalje dok radite s alatom.
• Never operate the tool if the power cord or plug is damaged.
• Always disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
• Koristite odgovarajuću oštricu za materijal koji režete.
• Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.

3. Komponente prekoview

Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:

• Cutting Table (Stainless Steel)
• Diamond Cutting Disc (180 mm diameter)
• Motorna jedinica
• Rezervoar za vodu
• Cutting Guide with Scale
• Angle Stop (-45° to +45°)
• Čuvar oštrice
• Prekidač za uključivanje/isključivanje
• Ručka za nošenje

Slika 1: Gotovoview of the Einhell TC-TC 800 Tile Cutter with its main parts.

4. Postavljanje

Before operating the tile cutter, ensure proper setup for safety and optimal performance.

4.1 Raspakiranje i pregled

1. Pažljivo izvadite sve komponente iz pakiranja.
2. Inspect the tool for any signs of damage during transit. Do not operate if damaged.
3. Provjerite jesu li prisutne sve navedene komponente.

4.2 Punjenje spremnika za vodu

The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.

1. Locate the water reservoir beneath the cutting table.
2. Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
3. Regularly check the water level during operation and refill as needed.

Figure 2: Filling the water reservoir for wet cutting.

4.3 Adjusting the Cutting Guide and Angle Stop

For accurate cuts, adjust the cutting guide and angle stop as required.

1. The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
2. For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.

Figure 3: Adjustable angle stop for miter cuts.

5. Upute za rad

Follow these steps for safe and effective tile cutting.

5.1 Uključivanje/isključivanje

1. Connect the tile cutter to a suitable power outlet (240 Volts).
2. Za uključivanje pritisnite zeleni gumb 'UKLJUČENO'.
3. Za isključivanje pritisnite crveni gumb 'ISKLJUČENO'.

Figure 4: Power switch for turning the machine on and off.

5.2 Izrada rezova

1. Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
2. Ensure the water pump is active and water is flowing to the blade.
3. Turn on the tile cutter.
4. Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
5. Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.

Figure 5: Demonstrating a tile being cut with the machine.

5.3 Službeni video o proizvodu: Kako koristiti

6. Održavanje

Regular maintenance ensures the longevity and performance of your tile cutter.

6.1 Cleaning the Water Reservoir

After each use, clean the water reservoir to prevent buildup of tile dust and debris.

1. Isključite napajanje.
2. Remove the cutting table or access panel to reach the reservoir.
3. Empty the dirty water and thoroughly clean the reservoir with fresh water.
4. Ponovno sastavite komponente.

6.2 Zamjena oštrice

Replace the diamond cutting disc when it becomes dull or damaged.

1. Provjerite je li alat isključen iz struje.
2. Upotrijebite priloženi alat za otpuštanje matice za pričvršćivanje oštrice.
3. Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
4. Čvrsto zategnite pričvrsnu maticu.

7. Rješavanje problema

This section addresses common issues you might encounter with your tile cutter.

8. Specifikacije

9. Jamstvo i podrška

9.1 Informacije o jamstvu

This Einhell product comes with a 2-godišnje ograničeno jamstvoMolimo sačuvajte dokaz o kupnji za bilo kakve reklamacije u jamstvenom roku.

9.2 Korisnička podrška

For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webNajnovije kontaktne podatke potražite na web-mjestu ili pakiranju proizvoda.