MOXA EDS-G512E-8PoE-4GSFP-T 12-Port Full Gigabit Managed Ethernet Switch User Manual

Uvod

This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of the MOXA EDS-G512E-8PoE-4GSFP-T 12-Port Full Gigabit Managed Ethernet Switch. This device is designed for industrial networking applications, offering 8 10/100/1000BaseT PoE/PoE+ ports and 4 100/1000BaseSFP slots, capable of operating in harsh environments from -40 to 75°C.

Prije upotrebe uređaja pažljivo pročitajte ovaj priručnik kako biste osigurali njegovu pravilnu funkcionalnost i sigurnost.

Sadržaj paketa

• MOXA EDS-G512E-8PoE-4GSFP-T Ethernet Switch
• Vodič za brzu instalaciju
• Jamstveni list
• Komplet za montažu (ako je primjenjivo)

Verify all items are present and undamaged. Contact your vendor if any items are missing or damaged.

Postavljanje

1. Fizička instalacija

The EDS-G512E-8PoE-4GSFP-T switch is designed for DIN-rail or wall mounting. Ensure the installation location provides adequate ventilation and is within the specified operating temperature range (-40 to 75°C).

Slika 1: Prednja strana view of the MOXA EDS-G512E-8PoE-4GSFP-T Ethernet Switch, showing the 8 PoE ports and 4 SFP slots.

2. Priključak za napajanje

Connect a 48 VDC power source to the terminal block on the switch. Ensure correct polarity. The switch supports redundant power inputs for enhanced reliability. Refer to the Quick Installation Guide for detailed wiring diagrams.

• Ulazni voltage: 48 VDC
• Redundancija: Dual power inputs

3. Mrežna veza

Connect Ethernet cables to the 10/100/1000BaseT PoE/PoE+ ports for standard network devices and PoE-powered devices. Insert SFP modules into the 100/1000BaseSFP slots for fiber optic connections. Ensure SFP modules are compatible with the switch and your fiber infrastructure.

• PoE priključci: 8 x 10/100/1000BaseT (PoE/PoE+)
• SFP utori: 4 x 100/1000BaseSFP

Operativni

1. Uključivanje

Once power is connected, the switch will automatically power on. Observe the power LED indicators to confirm proper power supply.

2. LED indikatori

The switch features various LED indicators to display its status and port activity:

• PWR1/PWR2: Indicates power status for input 1 and 2. (Green: Power OK, Off: No Power)
• GREŠKA: Indicates system fault. (Red: Fault detected, Off: No fault)
• MSTR/CPLR: Indicates redundant ring status.
• Port LEDs (Link/Act): Indicates link status and data activity for each port. (Green: Link established, Blinking Green: Data activity, Off: No link)
• PoE LED diode: Indicates PoE power status for PoE ports. (Green: PoE power supplied, Off: No PoE power)

3. Upravljanje mrežom

The EDS-G512E-8PoE-4GSFP-T is a managed switch. It can be configured and monitored via a web-based interface, Telnet/SSH, or SNMP. Refer to the product's software manual for detailed instructions on accessing and configuring the management interface.

• Zadana IP adresa: Consult the Quick Installation Guide or product documentation.
• Zadano korisničko ime/lozinka: Consult the Quick Installation Guide or product documentation.

Održavanje

1. Čišćenje

Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure the device is powered off before cleaning.

2. Ažuriranja firmvera

Redovito provjeravajte proizvođačeve website for firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements. Follow the instructions provided with the firmware package carefully.

3. Razmatranja okoliša

Osigurajte da radno okruženje ostane unutar navedenih raspona temperature i vlažnosti kako biste spriječili oštećenja i osigurali optimalne performanse.

Rješavanje problema

1. Nema snage

• Check power cable connections to the switch and power source.
• Provjerite je li izvor napajanja aktivan i osigurava li ispravnu glasnoćutage (48 VDC).
• Check the PWR1/PWR2 LEDs on the switch.

2. Nema mrežne povezivosti

• Provjerite jesu li Ethernet kabeli sigurno spojeni i na prekidač i na mrežni uređaj.
• Check the Link/Act LEDs for the respective port. A solid green indicates a link, blinking indicates activity.
• Verify network settings on connected devices.

3. PoE uređaj se ne uključuje

• Ensure the connected device is PoE compatible.
• Check the PoE LED for the specific port. A solid green indicates PoE power is being supplied.
• Verify the total power budget of the switch is not exceeded.

4. System Fault (FAULT LED is Red)

If the FAULT LED is red, consult the product's software manual or contact technical support for advanced diagnostics.

Tehnički podaci

Jamstvo i podrška

Informacije o jamstvu

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in the package or visit the official Moxa webstranicu za detaljne uvjete jamstva.

Tehnička podrška

For technical assistance, product documentation, or software downloads, please visit the official Moxa support website. You may also contact Moxa customer service directly for further assistance.

Moxa Official Webstranica: www.moxa.com