M-Wave Bicycle Computer Cicli Bonin_CVC911 User Manual

1. Uvod

This manual provides comprehensive instructions for the M-Wave Bicycle Computer, model Cicli Bonin_CVC911. It covers installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the product.

Image 1: M-Wave Bicycle Computer head unit, yellow model.

2. Sigurnosne informacije

Always prioritize safety when cycling. Ensure the computer is securely mounted and does not obstruct your view or control of the bicycle. Do not attempt to operate the computer while riding in traffic or hazardous conditions. Keep batteries out of reach of children. Dispose of batteries responsibly according to local regulations.

3. Sadržaj paketa

Provjerite jesu li sve komponente prisutne u paketu:

• M-Wave Bicycle Computer Head Unit
• Bežični senzor brzine
• Magnet za kotače
• Mounting Bracket for Handlebar/Stem
• Zip Ties for Sensor and Bracket
• Baterije (unaprijed instalirane ili odvojene)
• Priručnik s uputama

4. Postavljanje

4.1 Ugradnja baterije

The M-Wave Bicycle Computer uses alkaline batteries. If not pre-installed, open the battery compartment on the back of the head unit and the speed sensor. Insert the batteries with correct polarity, observing the '+' and '-' markings, and securely close the compartments.

4.2 Sensor and Magnet Mounting

Attach the wireless speed sensor to the front fork using the provided zip ties. Position the wheel magnet on a spoke so that it passes within 2mm of the sensor when the wheel rotates. Ensure the magnet and sensor are aligned for reliable signal transmission.

4.3 Computer Mounting

Mount the computer head unit to your handlebar or stem using the provided bracket and zip ties. Ensure it is firmly secured and visible without obstructing your view ili kontrole.

Slika 2: Bočna strana view of the M-Wave Bicycle Computer, illustrating its compact design and potential mounting points.

4.4 Početne postavke

Upon first use or after battery replacement, you will need to set up the computer. This typically involves:

1. Promjer kotača: Refer to your bicycle tire's sidewall for the circumference or use a measurement chart. Input this value into the computer for accurate speed and distance readings.
2. jedinice: Select your preferred units for speed (km/h or mph) and temperature (C° or F°).
3. Vrijeme: Postavite trenutno vrijeme.

Consult the on-screen prompts and use the 'SET' and 'MODE' buttons for navigation and selection.

5. Upute za rad

The M-Wave Bicycle Computer features 14 functions. Use the 'MODE' button to cycle through different display modes and the 'SET' button for adjustments within a mode.

Image 3: Product packaging showing the 14 functions of the M-Wave Bicycle Computer.

• Trenutna brzina: Displays your real-time cycling speed.
• Prosječna brzina: Shows the average speed for your current ride.
• Maksimalna brzina: Records the highest speed achieved during your ride.
• Udaljenost (DST): Displays the distance covered during your current ride.
• Total Distance (ODO): Shows the accumulated total distance.
• Vrijeme vožnje: Prati trajanje vaše trenutne vožnje.
• Sat: Prikazuje trenutno vrijeme.
• Temperatura: Shows the ambient temperature in Celsius or Fahrenheit.
• Brojač kalorija: Estimates calories burned during your ride.
• CO2 Savings: Calculates estimated CO2 savings compared to driving.
• Auto Start/Stop: The computer automatically starts recording when you begin cycling and pauses when you stop.
• Speed Tendency/Comparison: Indicates if your current speed is higher or lower than your average speed.

6. Održavanje

6.1 Čišćenje

Wipe the computer and sensor with a soft, damp cloth. Do not use abrasive cleaners or solvents. The unit is waterproof, but avoid submerging it for extended periods.

6.2 Zamjena baterije

When the display becomes dim or functions become erratic, it's time to replace the batteries. Follow the battery installation steps outlined in Section 4.1, ensuring correct polarity. Resetting initial settings may be required after battery replacement.

7. Rješavanje problema

If your M-Wave Bicycle Computer is not functioning as expected, consider the following:

• Nema prikaza brzine:
  • Check the distance between the sensor and magnet. It should be no more than 2mm.
  • Ensure the sensor and magnet are correctly aligned.
  • Verify that the sensor battery is not depleted.
  • Confirm the computer head unit battery is not depleted.
• Netočna očitanja:
  • Re-check the wheel diameter setting.
  • Ensure the sensor and magnet are securely mounted and not shifting.
• Zaslon je prazan:
  • Replace the computer head unit battery.
  • Provjerite je li baterija umetnuta s ispravnim polaritetom.
• Gumbi ne reagiraju:
  • Pokušajte izvaditi i ponovno umetnuti bateriju kako biste izvršili soft reset.

8. Specifikacije

9. Jamstvo i podrška

For warranty information and technical support, please refer to the M-Wave official webweb-mjesto ili se obratite prodavaču. Sačuvajte račun kao dokaz o kupnji.