1. Postavljanje i početna priprema
Before operating your Brother sewing machine, ensure it is properly set up and prepared for use. Follow these steps carefully.
1.1 Raspakiranje i spajanje na napajanje
- Pažljivo izvadite uređaj iz ambalaže. Sačuvajte sav materijal za pakiranje za budući transport ili skladištenje.
- Postavite stroj na stabilnu, ravnu površinu.
- Spojite utikač nožne pedale na utičnicu nožne pedale na stroju.
- Insert the machine's power cord into the power supply socket, then plug the other end into a suitable wall outlet.
Slika 1.1: Illustration of connecting the power cord and foot controller to the sewing machine. Ensure all connections are secure before powering on.
1.2 Namotavanje špulice
- Stavite kalem konca na iglu za kalem.
- Guide the thread through the upper thread guide and around the pre-tension disc.
- Insert the empty bobbin onto the bobbin winder spindle.
- Omotajte konac u smjeru kazaljke na satu oko špulice nekoliko puta.
- Gurnite vreteno namotača špulice udesno.
- Press the foot controller gently to start winding. Stop when the bobbin is full and push the spindle back to the left.
- Trim the thread.
Slika 1.2: Visual guide for correctly winding the bobbin. Proper bobbin winding is crucial for consistent stitch quality.
1.3 Uvlačenje gornjeg konca
- Podignite iglu u najviši položaj okretanjem ručnog kotačića prema sebi.
- Podignite ručicu stopice.
- Stavite kalem konca na iglu kalema.
- Provucite konac kroz gornju vodilicu konca.
- Bring the thread down the right channel, up the left channel, and through the take-up lever from right to left.
- Nastavite voditi konac prema dolje do vodilice konca na iglovodu.
- Thread the needle from front to back. Pull about 6 inches of thread through the needle eye.
Slika 1.3: The complete upper threading path. Incorrect threading can lead to skipped stitches or tangled thread.
1.4 Umetanje špulice
- Otvorite poklopac špulice.
- Umetnite namotanu špulicu u kućište špulice tako da se konac odmotava u smjeru suprotnom od kazaljke na satu.
- Guide the thread into the tension spring slot.
- Zatvorite pokrovnu ploču špulice.
- Hold the upper thread lightly and turn the handwheel towards you to bring the bobbin thread up through the needle plate hole.
- Povucite oba konca (gornji i špulicu) ispod pritisne stopice i prema stražnjoj strani stroja.
2. Upravljanje šivaćim strojem
This section covers the basic operations and functions of your Brother LS2125, LS2125i, or LS2129 sewing machine.
2.1 Odabir šavova
- Turn the stitch selector dial to choose your desired stitch pattern (e.g., straight stitch, zigzag stitch).
- Refer to the stitch chart on the machine or in this manual for available patterns.
Slika 2.1: The stitch selector dial. Rotate this dial to choose from various stitch patterns.
2.2 Podešavanje duljine i širine boda
- Use the stitch length dial to adjust the length of your stitches. Longer stitches are suitable for basting, shorter for fine work.
- Use the stitch width dial (if available for the selected stitch) to adjust the width of zigzag or decorative stitches.
2.3 Osnove šivanja
- Place the fabric under the presser foot, aligning the edge with a seam guide line on the needle plate.
- Spustite ručicu stopice.
- Lagano pritisnite nožnu pedalu za početak šivanja. Stroj će početi šivati.
- Guide the fabric gently with both hands, but do not push or pull it forcefully.
- To reverse stitch (for securing seams), press and hold the reverse lever/button.
- When finished, raise the needle to its highest position, raise the presser foot, and pull the fabric towards the back.
- Odrežite konce pomoću rezača konca na stroju ili škara.
Slika 2.2: The primary sewing area, showing the needle, presser foot, and feed dogs. Always keep fingers clear of the needle.
3. Održavanje i njega
Redovito održavanje osigurava dugotrajnost i optimalne performanse vašeg šivaćeg stroja.
3.1 Čišćenje područja špulice
- Isključite uređaj i izvucite utikač iz utičnice.
- Uklonite iglu i stopicu.
- Open the bobbin cover plate and remove the bobbin.
- Remove the bobbin case and the feed dog cover plate (if applicable).
- Use the small brush provided with your machine to remove lint and dust from the bobbin case, feed dogs, and surrounding areas.
- Ponovno sastavite sve dijelove.
Slika 3.1: Steps for cleaning the bobbin and feed dog area. Regular cleaning prevents thread jams and improves stitch quality.
3.2 Replacing the Needle
- Isključite stroj i izvucite ga iz struje.
- Podignite iglu u najviši položaj.
- Otpustite iglu clamp vijak okretanjem u smjeru suprotnom od kazaljke na satu.
- Uklonite staru iglu.
- Umetnite novu iglu s ravnom stranom okrenutom prema stražnjoj strani stroja, gurajući je prema gore do kraja.
- Zategnite iglu klamp čvrsto zavrnite.
3.3 Oiling (If Applicable)
Your Brother LS2125 series machine is designed to require minimal oiling. Refer to your specific model's detailed manual for oiling points, if any are recommended. Over-oiling can cause issues.
4. Rješavanje uobičajenih problema
This section provides solutions for common problems you might encounter during operation.
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Preskočeni šavovi | Nepravilna igla, savijena igla, nepravilno uvlačenje konca, pogrešna veličina igle za tkaninu. | Replace needle with correct type/size. Re-thread machine completely. |
| Prekidanje niti | Incorrect tension, poor quality thread, bent needle, improper threading, burrs on needle plate. | Adjust tension. Use good quality thread. Replace needle. Re-thread. Check for burrs. |
| Tkanina se ne uvlači | Presser foot not lowered, feed dogs lowered, lint in feed dogs. | Lower presser foot. Ensure feed dogs are up. Clean feed dogs. |
| Stroj se ne pokreće | Kabel za napajanje nije uključen, nožna pedala nije spojena, glavni prekidač je isključen. | Provjerite sve priključke za napajanje. Provjerite je li prekidač za napajanje UKLJUČEN. |
5. Specifikacije
General specifications for the Brother LS2125, LS2125i, and LS2129 sewing machine models.
- Brojevi modela: LS2125, LS2125i, LS2129
- Funkcije šivanja: 10-14 built-in stitches (varies by model), including straight, zigzag, and buttonhole.
- Vrsta igle: HAx1 (130/705H)
- Vrsta špulice: Class 15 (metal or plastic)
- Napajanje: AC 110-120V, 60Hz
- Dimenzije (cca): 39 cm Š x 17 cm D x 29.5 cm V
- Težina (približno): 13 lbs (5.9 kg)
- Maximum Sewing Speed: 750 šavova u minuti
6. Jamstvo i podrška
For specific warranty information and customer support, please refer to the warranty card included with your original purchase or visit the official Brother support webmjesto.
- Pokrivenost jamstvom: Typically includes limited warranty on parts and labor. Duration may vary by region and model.
- Korisnička podrška: Contact Brother customer service for technical assistance, parts, or service.
- Mrežni resursi: Posjetiti www.brother-usa.com/support for FAQs, video tutorials, and downloadable manuals.