TUNÇMATİK Newtech Pro X9 10 KVA Uninterruptible Power Supply User Manual

Uvod

This manual provides essential information for the safe and efficient operation of your TUNÇMATİK Newtech Pro X9 10 KVA Uninterruptible Power Supply (UPS). Please read this manual thoroughly before installation and operation. Keep this manual in a safe place for future reference.

The Newtech Pro X9 10 KVA is an online UPS designed to provide clean, stable, and reliable power to critical equipment, protecting against power outages, surges, and fluctuations. It features an LCD screen for easy monitoring and control.

Sigurnosne upute

Observe the following safety precautions to prevent injury and damage to the UPS or connected equipment:

• Ne otvarajte UPS casing. Unutra nema dijelova koje korisnik može sam servisirati. Za servisiranje se obratite kvalificiranom osoblju.
• Provjerite je li UPS spojen na uzemljenu utičnicu.
• Do not block ventilation openings. Maintain adequate clearance around the UPS for proper airflow.
• Izbjegavajte postavljanje UPS-a u područja s prekomjernom prašinom, vlagom ili ekstremnim temperaturama.
• Prije bilo kakvog održavanja ili čišćenja isključite UPS iz izvora napajanja.
• The UPS contains internal batteries. Do not dispose of batteries in a fire, as they may explode.

Proizvod gotovview

Slika 1: Prednja strana view of the TUNÇMATİK Newtech Pro X9 10 KVA UPS, showing the LCD display and control panel.

The TUNÇMATİK Newtech Pro X9 10 KVA UPS features a robust design for critical power protection. Key components include:

• LCD zaslon: Provides real-time status, input/output voltage, battery level, and alarm information.
• Kontrolni gumbi: For navigating menus and configuring settings.
• Ulazni/izlazni terminali: For connecting to the main power supply and protected equipment.
• Ventilacijske rešetke: Neophodan za odvođenje topline.

Postavljanje

1. Raspakiranje i pregled

1. Carefully unpack the UPS and its accessories.
2. Inspect the unit for any physical damage that may have occurred during transit. If damage is found, contact your dealer immediately.
3. Verify that all standard accessories are present: UPS unit, user manual, and any included cables.

2. plasman

• Postavite UPS na čisto, suho i dobro prozračeno mjesto.
• Ensure the ambient temperature is between 0°C and 40°C (32°F and 104°F).
• Izbjegavajte izravnu sunčevu svjetlost i izvore topline.
• Maintain at least 20 cm (8 inches) of clearance around the front, back, and sides of the UPS for proper ventilation.

3. Električna veza

1. Provjerite je li glavni prekidač za napajanje u položaju ISKLJUČENO.
2. Connect the UPS input power cable to a grounded electrical outlet.
3. Connect your critical equipment to the UPS output terminals. Ensure the total load does not exceed the UPS's rated capacity (10 KVA).
4. For models with external battery packs (if applicable), connect them according to the separate battery pack manual.

Upute za rad

1. Početno pokretanje

1. After connecting all cables, turn on the main power switch.
2. Press and hold the power button on the front panel for approximately 3 seconds until the UPS powers on.
3. LCD zaslon će se osvijetliti i prikazati redoslijed pokretanja.
4. Allow the UPS to perform its self-test. Once complete, it will enter normal operation mode, providing power to connected devices.

2. LCD zaslon i upravljačka ploča

The LCD display provides critical information about the UPS status. Use the control buttons to navigate through menus and view parameters such as:

• Ulaz/Izlaz Voltage i učestalost
• Battery Charge Level and Remaining Runtime
• Postotak opterećenjatage
• Operating Mode (Online, Battery, Bypass)
• Alarm and Event Logs

3. Postupak isključivanja

1. Ensure all connected equipment is safely shut down.
2. Press and hold the power button on the front panel for approximately 3 seconds until the UPS powers off.
3. Disconnect the UPS from the main power supply if it will not be used for an extended period.

Održavanje

1. Briga o bateriji

• UPS baterije su dizajnirane za određeni vijek trajanja. Redoviti samotestovi pomažu u praćenju stanja baterije.
• Avoid frequent deep discharges, which can shorten battery life.
• If the UPS is stored for an extended period, recharge the batteries every 3-6 months to prevent permanent damage.
• Zamjenu baterije treba obavljati samo kvalificirano servisno osoblje.

2. Čišćenje

• Ensure the UPS is turned off and disconnected from the power source before cleaning.
• Use a soft, dry cloth to wipe the exterior of the UPS.
• Do not use liquid cleaners or solvents, as they may damage the casing ili unutarnje komponente.
• Periodically clean ventilation grilles to ensure unobstructed airflow.

Rješavanje problema

Ovaj odjeljak nudi rješenja za uobičajene probleme. Ako se problem nastavi, obratite se tehničkoj podršci.

Tehnički podaci

Jamstvo i podrška

TUNÇMATİK products are backed by a limited warranty. Please refer to the warranty card included with your product or visit the official TUNÇMATİK webstranicu za detaljne uvjete jamstva.

For technical support, service, or inquiries, please contact your local TUNÇMATİK dealer or authorized service center. When contacting support, please have your product model number (Newtech Pro X9 10 KVA) and serial number ready.

Proizvođač: TUNÇMATİK